Association Between Sleep Quality and Cognitive Symptoms in Patients with Major Depressive Disorder

Summary

Here, we present a protocol that investigates the relationship between cognitive symptoms and sleep quality in patients with major depressive disorder. The THINC-integrated tool and polysomnography were used to evaluate cognitive symptoms and sleep quality.

Abstract

Cognitive symptoms and sleep disturbance (SD) are common non-mood-related symptoms of major depressive disorder (MDD). In clinical practice, both cognitive symptoms and SD are related to MDD progression. However, there are only a few studies investigating the connection between cognitive symptoms and SD in patients with MDD, and only preliminary evidence suggests a significant association between cognitive symptoms and SD in patients with mood disorders. This study investigates the relationship between cognitive symptoms and sleep quality in patients with major depressive disorder. Patients (n = 20) with MDD were enrolled; their mean Hamilton Depression Scale-17 score was 21.95 (±2.76). Gold standard polysomnography (PSG) was used to assess sleep quality, and the validated THINC-integrated tool (the cognitive screening tool) was used to evaluate cognitive function in MDD patients. Overall, the results showed significant correlations between the cognitive screening tool's total score and sleep latency, wake-after-sleep onset, and sleep efficiency. These findings indicate that cognitive symptoms are associated with poor sleep quality among patients with MDD.

Introduction

Major depressive disorder (MDD), a serious mood disorder that causes significant morbidity and mortality, affects over 300 million people worldwide¹. MDD is characterized by low mood, reduced drive, loss of interest, and thoughts of self-harm or suicide². Cognitive symptoms and sleep disturbance (SD) are two non-mood-related symptoms of MDD^3,4. Previous studies have shown that the prevalence of SD is 60-90% in patients with MDD, while the prevalence of sleep disorders among these patients in the Chinese population is 85.22%⁵.

Although few studies have investigated the causal relationship between cognitive symptoms and SD, preliminary evidence suggests a significant association between sleep disorders and cognitive symptoms in individuals with MDD⁶. For example, Cha et al.³ found that subjective sleep quality predicted both subjective cognitive performance and objective cognitive impairments, which were partially mediated by depression severity. Biddle et al.⁷ also found that among older men with MDD, poor sleep efficiency (SE), measured by actigraphy, was associated with worse cognitive function independent of depression severity. The observed discrepancies may be caused by methodological differences.

Within this literature, researchers have used various tools to evaluate sleep and cognition. The Pittsburgh Sleep Quality Index (PSQI) was commonly selected as a subjective tool. Actigraphic devices have also been used. However, PSG, regarded as the gold standard for detecting sleep disorders⁸, is a sensitive, objective SD assessment⁹. To our knowledge, among the studies of the relationship between sleep and cognition in patients with MDD, few have used PSG to evaluate sleep quality.

Cognitive symptoms in MDD might be multidimensional and addressed in some cases by new pharmacological strategies^10,11. Several cognitive assessment tools suitable for MDD have emerged in recent years¹². THINC-integrated tool (THINC-it; henceforth referred to as the cognitive screening tool), a validated cognitive screening tool developed by Hou et al.¹³, is composed of a subjective questionnaire (perceived deficits questionnaire, PDQ-5) and four objective cognitive tests (choice reaction time, 1-back, digit symbol substitution, and trail making part-B). It is considered a time-efficient, acceptable method for detecting cognitive deficits in patients with MDD¹⁴. There are two other tools commonly used to assess cognitive function in patients with MDD: the Screen for Cognitive Impairments in Psychiatry-D (SCIP-D) and Cognitive Complaints in Bipolar Disorder Rating Assessment (COBRA)¹². The former is an objective tool lacking self-instructed testing, and the latter is a subjective tool lacking an objective version. The constituent tests also differ between these tools. The SCIP-D is comprised of five objective tests: verbal learning, working memory, verbal fluency, delayed memory, and processing speed. The COBRA includes executive function, processing speed and attention, verbal learning and memory, and visual memory¹². The recently developed Chinese version of the cognitive screening tool has been confirmed to be a good tool for evaluating cognitive deficits in Chinese patients with MDD¹⁵. Thus, using the cognitive screening tool software and PSG, the current study tried to reveal the relationship between cognitive symptoms and SD in MDD patients.

Protocol

The study was approved by the Academic Ethics Committee of the Inner Mongolia Mental Health Center (The Third Hospital of Inner Mongolia Autonomous Region, Brain Hospital of Inner Mongolia Autonomous Region) in Hohhot, China. An informed consent form was signed by all study participants.

1. PSG procedure

1. Data collection
   1. Include patients with MDD who were diagnosed according to the DSM-V.
      NOTE: This study included 22 patients with MDD who were diagnosed according to the DSM-V. Due to the low educational level, 2 patients with MDD refused to participate. Because both of them found it was not easy to read characters while completing TMT-B in the cognitive screening tool.
   2. Exclude participants who were diagnosed with severe dementia, anxiety, delirium, and other diseases, which made them unable to complete PSG for the whole night.
   3. Collect participants' demographics, including name, nationality, gender, age, date of birth, marriage, complaints, symptoms, main diagnosis, history, department, temperature, pulse, respiratory rate, blood pressure, height, weight, body mass index, abdominal circumference, and upper chest circumference, were collected.
   4. Each participant was instructed to complete the Epworth Sleeping Scale¹⁶.
2. Connecting derivations
   1. After collecting the participants' information, lead the participant to the sleep monitoring room.
   2. Collect all the derivations of electroencephalogram (EEG), electrooculogram (EOG), chin electromyogram (EMG), and electrocardiogram (ECG) step-by-step.
      NOTE: The participant should keep his/her face, skin, and hair clean and dry.
   3. Connect 15 electrodes of EEG according to the international 10-20 system of electrode placement (Figure 1)¹⁷.
   4. Connect two derivations of EOG (E1, E2) as shown in Figure 2.
   5. Connect three derivations of chin EMG (Chin1, Chin2, ChinZ) as shown in Figure 3.
   6. Connect two derivations of ECG (+, −) as shown in Figure 4.
3. Starting the data acquisition system
   1. Double-click Device Manager to start the software.
   2. Double-click the Room option and add the personal information of the participant.
      NOTE: The personal information includes name, gender, date of birth, file name, file path, etc. More details can be added as needed (for example, height, body weight, neck circumference, doctor, technician, hospital, address, marital status, profession, and guardian [if the participant is a child]).
   3. Click the OK button.
   4. Click the Start Recording button.
   5. Click the Calibration button and instruct the participant to perform according to the step-by-step calibration procedure (see Supplementary Figure 1).
      NOTE: The calibration step-by-step procedure is listed in Table 1. During the calibration, the remote call system should be turned on so the participant can be guided to perform according to the doctors' instructions.
4. Collecting data all night long
   1. Keep the derivations in the correct position all night long.
      NOTE: This will be done by the duty technician. The duty technician should have emergency management training for conditions like asthma, unstable angina, etc.
5. Post calibration
   1. Awaken the participant and turn on the light of the sleep monitoring room.
   2. The wake-up time is usually at 6:00 am. Stop the monitoring if the participant wakes up before 6:00 am and does not want to continue.
   3. If the participant is in a rapid eye movement (REM) sleep period at 6:00 am, continue monitoring until the REM sleep period ends.
   4. Repeat step 1.3.5 once again for post-calibration.
   5. Click the Close button to stop recording.
6. Remove all the derivations gently to avoid skin damage.
7. Scoring
   1. Double-click the ProFusion PSG4 button to start the scoring system.
   2. Double-click the name of the participant to select the participant.
   3. Click the Scoring button and select the Scoring Automatically option to score sleep phases and arousals.
      NOTE: Sleep phases and arousals were scored according to The AASM Manual for the Scoring of Sleep and Associated Events: Rules, Terminology, and Technical Specifications¹⁸. Scoring can be manually modified by a technician, too.
   4. Click the Create button and layout the results (Figure 5).
8. Definitions and equations
   1. Get variables including time in bed (TIB), total sleep time (TST), sleep latency (SL), wake after sleep onset (WASO), sleep efficiency (SE, equals TST/TB), and REM latency according to the PSG data and waves (as shown in Table 2).

2. Using the cognitive screening tool

1. Double-click the THINC-it button to start the software on the computer, enter the personal information, and instruct the participant to complete each subtest step by step.
   1. Click the Chinese button to select the simplified Chinese version.
   2. Click the Plus button to add a new participant.
   3. Type in name, age, gender, dominant hand, educational level, and location at the corresponding blanks.
   4. Click the BEGIN TEST button to begin the subtests step by step (see Supplementary Figure 2).
2. Complete the perception deficits questionnaire (PDQ-5, subjective cognitive deficits).
   1. Read aloud, "During the past 7 days, how often did you have trouble getting things organized?" and instruct the participant to choose one of the 5 response options: Never in the past 7 days, Rarely (once or twice), Sometimes (3 - 5 times), Often (about once a day), and Very often (more than once a day).
   2. Read aloud, "During the past 7 days, how often did you have trouble concentrating on what you were reading?" and instruct the participant to choose one of the 5 response options described in step 2.2.1.
   3. Read aloud, "During the past 7 days, how often did you forget the date unless you looked it up?" and instruct the participant to choose one of the 5 response options described in step 2.2.1.
   4. Read aloud, "During the past 7 days, how often did you forget what you talked about after a telephone conversation?" and instruct the participant to choose one of the 5 response options described in step 2.2.1.
   5. Read aloud, "During the past 7 days, how often did you feel like your mind went totally blank?" and and instruct the participant to choose one of the 5 response options described in step 2.2.1.
   6. Click the OK button to start other subtests.
3. Complete the spotter test (SPO, reflection of attention).
   1. Click the Tutorial button and the Next button to read the step-by-step instructions.
   2. Click the Start button to begin the SPO test.
      NOTE: The SPO test is used to assess attention; the participant needs to touch the suddenly appearing symbol as quickly as possible.
      NOTE: This software will automatically show the Best Reaction Time (milliseconds), Correct Responses, Longest Streak, and Index on screen.
   3. Click the OK button to begin the next subtest.
4. Complete the symbol check test (SC, reflection of working memory).
   1. Click the Tutorial and Next buttons to read the step-by-step instructions.
   2. Click the Start button to begin the SC test.
      NOTE: The SC test is used to assess working memory. The participant needs to identify the symbol hidden before the timer runs out and recall the next hidden symbol. This software will automatically show the Fastest Reaction Time (milliseconds), Correct Answers, Longest Streak, and Index on screen.
   3. Click the OK button to begin the next subtest.
5. Complete the code breaker test (CB, reflection of information processing speed).
   1. Click the Tutorial and Next buttons to read the step-by-step instructions.
   2. Click the Start button to begin the CB test.
      NOTE: The CB test is used to assess information processing speed. The participant needs to click the correct symbol to fit the indicated circle (each symbol is identified into a certain number inside the circle). This software will show the Fastest Reaction Time (milliseconds), Correct Nodes, Longest Streak, as well as Index automatically on the screen.
   3. Click the OK button to enter the next subtest.
6. Complete the TMT-B (trails, reflection of executive function).
   1. Click the Tutorial and Next buttons to read the step-by-step instructions.
   2. Click the Start button to begin the CB test.
      NOTE: Trails test is used to assess executive function. The participant needs to trace a line beginning from a character to number 1 without lifting his/her finger, then continue from the number 1 to another character, then continue from this character to number 2, and continue it till 9, as fast as possible. This software automatically shows the Completion Time (milliseconds), Errors, Longest Streak, and Index on screen.
   3. Click the OK button to complete the last subtest.
      NOTE: The software will automatically show participant performance on each test; download these results.

3. Statistical analysis

1. Use the Students' t-tests to assess group differences. Perform the Pearson correlation analysis to evaluate the relation between sleep quality and cognitive function. Consider P < 0.05 as statistically significant.
   NOTE: All statistical analyses were performed using SPSS version 25.0.

Results

The male/female ratio was 11/9 for the participants. For all the individuals, the age reached 35.35 ± 6.83 years, educational level was 14.80 ± 3.29 years, Hamilton depression scale-17 (HAMD-17) score was 21.95 ± 2.76 points, SE was 76.71 ± 8.57%. Regarding the cognitive screening tool scores, PDQ-5, SPO, SC, CB, TMT-B, and total scores were 1756.35 ± 395.49, 2046.75 ± 684.45, 852.15 ± 651.81, 845.75 ± 641.15, 911.45 ± 619.13 and 4140.80 ± 1298.14 points, respectively (

Discussion

This two-part protocol has critical steps that demand attention. For PSG, scoring is the most important step; thus, PSG technicians need to be certified and experienced. In addition, before PSG, communication between technicians and participants is necessary because patients might feel uncomfortable and quit during PSG. For the cognitive screening tool, the critical step is evaluating the cognitive function with digitized equipment. Doctors need to introduce the procedures step by step to ensure the participant understan...

Materials

Name	Company	Catalog Number	Comments
Computer	Surface	Surface pro2
Derivation	Compumedics	Grael
Electrode	Compumedics	Grael
Polysomnography	Compumedics	Grael
Software	Compumedics	Compumedics Profusion PSG4