Iatrogenic Injury Recapitulated: Electroexcision Technique for Urethral Stricture Modeling in Rats

Summary

In this study, we present a novel, efficient, and stable rat model of urethral stricture created through electroexcision of the rat urethra, which effectively simulates iatrogenic injury observed in clinical settings.

Abstract

Urethral stricture (US) is a common clinical condition in urology, characterized by high prevalence and morbidity across all ages. Current treatments for US, such as urethral dilatation and internal urethrotomy, fail to fully resolve the condition and are associated with high rates of recurrence and complications.

Additionally, the pathogenesis of US is not well understood. To explore the pathogenesis of US and develop new therapeutic strategies, it is crucial to establish a standardized rat model that accurately reflects the clinical manifestations. This study outlines a straightforward and repeatable method for inducing US in rats using a high-frequency electric knife. The method involves making a longitudinal incision with the electric knife set to a unipolar mixed cutting mode at 4 W, which inflicts significant urethral damage. Histopathological analysis shows thickening of the urothelium, inflammatory infiltration, and disorganized collagen fibers. This model effectively replicates iatrogenic injury through electroexcision in the rat urethra. In summary, this study successfully establishes a new, efficient, and stable rat model of US that closely mimics the clinical scenario, providing a valuable tool for further research into the mechanisms and novel treatments for US.

Introduction

Urethral stricture (US) is among the oldest urologic conditions and continues to be widely prevalent. Recent data suggest that there are between 229 and 627 cases of US per 100,000 males¹. Those suffering from US experience a range of symptoms including lower urinary tract symptoms², pain³, and sexual dysfunction⁴. Several medical treatments are available, such as urethrotomy, urethroplasty, and dilation⁵. However, these treatments are often complicated by issues such as bleeding, infection, and incontinence, contributing to the disease burden and exhibiting varying rates of recurrence^6,7. Consequently, identifying the most effective therapeutic approaches remains a critical challenge engaging researchers and clinicians.

US is generally characterized as a narrowing of the anterior urethra caused by fibrosis and cicatrization of the urethral mucosa and surrounding spongiosum tissue⁸. Despite its prevalence, the causes and mechanisms underlying US are poorly understood, and there is a lack of suitable animal models for in-depth study. Iatrogenic injury, primarily from transurethral surgery, is currently the leading cause of US, accounting for 41% of cases⁹. Therefore, an ideal animal model for US research should accurately replicate common clinical injuries, exhibit close genomic and proteomic similarities to humans, and demonstrate both efficiency and stability. Such a model would greatly facilitate deeper investigations into the pathogenesis of US and the development of more effective treatments.

To investigate the pathogenic process and mechanism of common clinical types, various animal models have been developed using large animals such as rabbits^10,11, dogs¹², and pigs^13,14 employing techniques like electrocoagulation, electroresection¹⁵, and bleomycin injections¹⁶. However, these models often face challenges due to sample size limitations and genetic differences from humans. Additionally, the cost-effectiveness of using large animals must be considered; despite the high costs associated with daily care, large animals also carry significant risks of infection, necessitating extensive postoperative care and considerable expenses. It is well documented that rodents share physiological and pathological characteristics with humans in many organ systems. A recent study has shown homology between the urinary tract cells of rodent animals and humans¹⁷. Furthermore, the costs of purchasing, housing, and postoperative care of rats are significantly lower than those of large animals¹⁸. Consequently, a rat model of the US is deemed suitable; however, the development of such models in rats has been inadequately described.

Prior studies have used surgical tools such as blades or needles to induce US in rat models¹⁹. This approach has been associated with risks such as damaging periurethral blood vessels, leading to significant bleeding. The subjective nature of these surgical procedures can also result in variability in the extent of mechanical injury, lacking quantitative criteria for modeling, which may affect the assessment of urethral repair outcomes in subsequent therapeutic studies.

Given these considerations, there is a clear need to develop an additional US rat model. To establish an efficient, cost-effective, and stable US model in rats, we employed a high-frequency electric knife machine in our research. This model will facilitate further investigations into the mechanisms of US and the evaluation of new therapeutic approaches before proceeding to clinical trials.

Protocol

In this investigation, twenty 6-month-old male Sprague-Dawley rats, each weighing 400-500 g, were employed. All animal procedures were conducted in accordance with the guidelines of the Institutional Animal Care and Use Committee at the Fifth Affiliated Hospital of Sun Yat-Sen University (Approval number: 00349). The animals were housed in a facility with controlled temperature and lighting conditions. A fundamental characteristic of urethral stricture is the development of scarring within the urethra. Based on the established timeline for scar formation, which typically occurs within 4 weeks of injury, we designated the presence of discernible scar tissue in the urethra at the 4-week postoperative mark as the experimental endpoint.

1. Preparation of surgical instruments

1. Prepare the following surgical materials: Teflon coated catheter (0.6 x 1 mm), absorbable sutures (6-0), suture scissors, tissue forceps, needle-holding pliers, smooth forceps, high-frequency electrosurgical unit (Figure 1), including the panel of the high-frequency electric knife, surgical electrode high-frequency electrosurgical knife, and the anal conductive rod (see Table of Materials).
2. Clean the surgical area with alcohol wipes containing 75% ethanol.
3. Preparation for using a high-frequency electric knife in a unipolar electric cutting mode.
   1. Connect the high-frequency electric knife to the grounded 220 V main power supply using a power cord.
   2. Insert the sterilized hand-controlled knife handle and conductive rod into their respective sockets (Figure 1C).
      NOTE: Ensure that all power cables are securely connected to maintain the safety of the surgery.

2. Preparation of the animal

1. Draw up the sodium pentobarbital (60 mg/kg) into a syringe.
2. Secure the rat by grasping its tail with the dominant hand and holding the skin of its ears and neck with the non-dominant hand to ensure it is firmly fixed.
3. Expose the rat's lower abdomen and disinfect the area using cotton balls soaked in 75% ethanol.
4. Insert the syringe needle approximately 1-2 mm beside the abdominal midline in the lower abdomen, directing it into the abdominal cavity at a 45° angle.
   NOTE: You will feel a loss of resistance when the needle penetrates the peritoneum.
5. Gently pull back the syringe plunger to ensure there is no blood or fluid in the syringe.
6. Slowly inject the sodium pentobarbital. Withdraw the needle, completing the injection, and disinfect the site again with cotton balls soaked in 75% ethanol.
7. Monitor the rat's breathing rhythm and pinch its hind paw to check for reflexes.
   NOTE: Confirm that the rat's breathing is steady and that it shows no reflexes before proceeding with surgery.
8. Squeeze out the erythromycin ointment and dip a cotton swab in the ointment. Apply the ointment with the cotton swab on the corneas of both eyes to prevent corneal drying during the procedure.
9. Use an electric shaver to shave the lower abdomen and perineum after anesthesia is confirmed.
10. Wipe off loose hair from the shaved area with a tissue dampened with saline.
11. Disinfect the area by wiping it twice with a gauze sponge soaked in iodophor to minimize skin irritation.
12. Place the deeply anesthetized rat on a heating pad set to 37°C in a supine position. Ensure sterility during the surgical procedures by wearing medical gloves.

3. Urethral catheterization and injury procedure

1. Insert the conductive rod into the anus of the rat to establish an effective closed-loop circuit for the high-frequency electric knife machine (Figure 2A).
2. Catheterize the urethra of the rat to aid in positioning and provide support during the surgery's post-processing steps.
   1. Lubricate the urinary catheter with paraffin oil.
   2. Expose the penis by squeezing the skin around it to protrude it from the abdomen.
   3. Disinfect the penis of the rat with a gauze sponge soaked in iodophor.
   4. Gently open the urethral orifice with smooth forceps and insert the lubricated catheter into the urethra.
   5. Carefully insert the Teflon-coated catheter in the urethra with the rhythm of urethral contraction; avoid any forceful insertion (Figure 2B).
   6. If resistance is encountered, gently pull the penis toward the ventral side to adjust the bending angle of the penis and continue advancing the catheter into the bladder until the urine flows out (Figure 2C).
   7. Confirm successful catheterization by ensuring the penis forms an approximate 45° angle with the abdomen (Figure 2D).
3. Turn on the high-frequency electric knife machine, click the buttons of the high-frequency knife panel to select the unipolar mixed cutting mode, and set the power to 4 W for the following steps of electroexcising the penis layer by layer.
4. Align the incision with the catheter. Press the yellow button on the electrosurgical knife handle and make an incision along the catheter marking line from the penile skin to the outer layer of the urethra using the electric knife until the urethra is exposed (Figure 3A,B).
   NOTE: Ensure you press the yellow button for electroexcision, not the blue button for electrocoagulation.
5. Continue to make a longitudinal incision of 0.5 cm in the urethra with the electric knife, ensuring a transverse diameter of 0.1 cm, until the catheter is visible (Figure 3C).
6. Suture the wound and the superficial skin layer by layer using absorbable sutures (6-0) with either continuous or interrupted stitches (Figure 3D,E).
7. Remove the urethra catheter and reposition the penis (Figure 3F).
8. Turn off the high-frequency electric knife and remove the conductive rod from the rat's anus.
9. Clean the surgical materials with alcohol (75% ethanol) wipes.

4. Postoperative care

1. Place the rat on a warmed pad (37 °C) and monitor its recovery from anesthesia closely. Pay careful attention to the rat's physical condition, including breathing rhythm, body temperature, and level of consciousness.
   NOTE: Do not return the rat into its cage until full recovery is observed.
2. House the rats in a clean cage and fill the water bottle with morphine-spiked water (0.4 mg/kg) for daily pain management after recovery.
3. Administer non-steroidal anti-inflammatory drugs (such as Carprofen, 0.5 mg/kg, subcutaneous injection) for the rats' full recovery from postoperative pain.

5. Histological evaluation

1. Four weeks after the surgery, induce the micturition reflex by lifting the rats' tails. Place the rat in a euthanasia box, open the CO₂ transmission pipe valve, and humanely euthanize the rats with an overdose of CO₂.
2. Turn off the valve after confirming that the rat is motionless and not breathing and observing that the pupil is dilated. Continue to observe the rat's physical condition for 2 min to confirm that euthanasia is successful.
3. Remove the rat from the euthanasia box.
4. Clean the surgical area and surgical materials with wipes soaked in 75% ethanol.
5. Dissect the abdomen to observe the bladder-filling status and harvest the entire urethra.
6. After harvesting the urethra, put the rat in a sealing bag and store it in a 4 °C refrigerator for processing by laboratory technicians.
7. Morphologically evaluate the US for gross pathology, focusing on the color and smoothness of the tissue.
8. Stain the urethra tissue with hematoxylin and eosin (H&E) to visualize the wound structure and urothelial cell layer.
   1. Dip the slides in xylene for deparaffinization (2 x 5 min).
   2. Rehydrate the slides in ethanol in order (100% 1 x 3 min, 95% 1 x 3 min, 85% 1 x 3 min, 75% 1 x 3 min).
   3. Wash the slides in deionized water (2 min).
   4. Stain the slides with hematoxylin (10 min).
   5. Wash the slides in deionized water (5 min).
   6. Differentiate the samples with differentiation solution (40 s).
   7. Wash the slides in deionized water (2 x 3 min).
   8. Stain the slides with eosin (2 min).
   9. Rehydrate the slides in ethanol in an order (100% 1 x 3 s, 95% 1 x 3 s, 85% 1 x 3 s, 75% 1 x 3 s)
   10. Dip the slides in 100% ethanol (1 min) and transparentize the slides with xylene (2 x 1 min).
   11. Add neutral balsam and seal with the coverslip.
9. Apply Masson's trichrome stain to the urethra tissue to highlight the collagen fiber structure.
   1. Dip the slides in xylene for deparaffinization (2 x 5 min).
   2. Rehydrate the slides in ethanol in order (100% 1 x 3 min, 95% 1 x 3 min, 85% 1 x 3 min, 75% 1 x 3 min).
   3. Wash the slides in deionized water (2 min).
   4. Stain the slides in Weigert's Iron Hematoxylin solution (5 min).
   5. Wash the slides in deionized water (5 min).
   6. Stain the slides in Biebrich Scarlet-Acid Fucshin (5 min).
   7. Wash the slides in deionized water (2 x 3 min).
   8. Stain the slides with Phosphomolybdic Acid solution (5 min).
   9. Place slides in Aniline Blue solution (5 min). Discard solution.
   10. Rinse the slides, dehydrate through alcohol, and clear in xylene.
   11. Add neutral balsam and seal with the coverslip.
10. Perform immunofluorescence staining using a TGF-β antibody to assess the urothelial cell layer.
    1. Add the appropriate antigen retrieval buffer to the pressure cooker. Place the pressure cooker on the hotplate and turn it on full power.
    2. Once boiling, transfer the slides from the tap water to the pressure cooker. Run cold water over the cooker and heat the slides for 10 min.
    3. Turn off the pressure cooker and remove the slides. Cool the slides to room temperature.
    4. Wash the slides with PBS solution.
    5. Mark the margins of samples with liquid blocker pen.
    6. Dip the slides in PBS plus 0.3% Triton X-100 for 30 min.
    7. Wash the slides in PBS with gentle agitation (2 x 5 min).
    8. Block in 10% goat serum in PBS at room temperature (60 min).
    9. Aspirate blocking buffer and incubate with primary antibody at 4 °C for overnight.
    10. Wash the slides with 1x PBS (3 x 5 min).
    11. Incubate with fluorochrome-labeled secondary antibody diluted in antibody dilution buffer.
    12. Wash the slides with 1x PBS (3 x 3 min).
    13. Mount and seal the slides.
11. Digitally scan the stained slides using a 40x objective in a slide scanner.
12. Analyze the images and measure the thickness of urothelium using the referenced software (Table of Materials).
    1. Open the software.
    2. Click Local Computer to select the stained slide images.
    3. Click Measure Distance to measure the thickness of the urothelium.
    4. Record the data on the thickness of urothelium.

Results

The protocol outlined in this study successfully established stable urethral stricture in rats and demonstrated high reproducibility. The average duration of the operations was 20 min, and no technical issues arose during the procedures. Urethral specimens were successfully harvested 4 weeks after the procedure.

In the experimental group, the rats' bladders showed signs of overdistension, in contrast to the control group where the bladders were empty (Figure 4...

Discussion

US pose a significant healthcare burden with a substantial economic impact, adversely affecting both psychological and physical well-being²⁰. There is still a need for a treatment that not only completely cures US but also effectively prevents its recurrence.

In this study, we utilized a rat model to develop a straightforward and reproducible method for mimicking urethral injury in patients, which was followed by transurethral surgery-induced urethral injury. Rats are f...

Materials

Name	Company	Catalog Number	Comments
absorbable sutures (6-0)	KERONG COMPANY	KR2230814
Animal operating pad	Provided by Guangdong Provincial Key Laboratory of Biomedical Imaging	NA
CaseViewer 2.4	3DHISTECH Ltd.
Carprofen	Sigma-Aldrich	MFCD00079028
CoraLite488-conjugated Goat Anti-Rabbit IgG(H+L)	Proteintech	SA00013-2
H&E Stain Kit	Abcam	ab150669
high-frequency electrosurgical unit	Beijing Taktvoll Technology Company	ES-100v
Masson staining kit	Merck	HT15
needle-holding pliers	RWD Life Science	S15001-11
Paraffin oil	NA	NA
smooth forceps	RWD Life Science	F13019-12
Sodium pentobarbital	Guangdong Provincial Key Laboratory of Biomedical Imaging	NA
Sprague–Dawley rat	Guangdong Medical Laboratory Animal Center	GDMLAC-035
suture scissors	RWD Life Science	S15001-11
Teflon coated catheter (0.6 mm x 1 mm)	DGZF new materials company	NA
TGF Beta 1 Polyclonal antibody	Proteintech	21898-1-AP
Tissue scissors	RWD Life Science	S13029-14