We thank Dr. Dr. Michael Cashel (National Institutes of Health, Bethesda, MA, USA) for sending us bacterial strains, plasmids, and necessary protocols. We thank Dr. John Glover (Department of Biochemistry, University of Toronto) for use of the SpecraMax plate reader. UK is the recipient of a National Sciences and Engineering Research Council of Canada (NSERC) Postgraduate Scholarship, a Canadian Institutes of Health Research Strategic Training Program in the Structural Biology of Membrane Proteins Linked to Disease, and a University of Toronto Open Fellowship. This work was supported by a grant from the Canadian Institutes of Health Research (MOP-67210) to WAH.

1) Reagents and Equipment
<ol>
 <li>First, prepare the following three solutions: 1 mL of Solution A which is made up of 8 mM L-lysine, 100 mM sodium 2-(N-Morpholino)ethanesulphonic acid (MES) pH 6.5, 0.2 mM nucleotide, where the nucleotide is either: guanosine diphosphate (GDP), guanosine triphosphate (GTP), guanosine 5'-diphosphate,3'-diphosphate (ppGpp), or guanosine 5'-triphosphate,3'-diphosphate (pppGpp), 0.1 mM pyridoxal 5'-phosphate (PLP), and 1 mM &beta;-mercaptoethanol/ (&beta;-ME). 1 mL of Solution B which consists of 100 mM sodium MES pH 6.5, 0.1 mM PLP, 1 mM &beta;-ME, and 50 nM LdcI. LdcI was purified as described in Snider et al.6 and Kanjee et al. 14. 
 1 mL of Solution C which is identical to Solution B but does not contain LdcI.</li>
 <li>Prepare 100 mL of the stop solution consisting of 1 M sodium carbonate (10.6 g/100 mL) and aliquot 50 &mu;L into each well of a 96-well polystyrene plate using a multi-channel pipette. Add 30 &mu;L of water to the plate and then cover. Note that the sum of the volume of water added and the volume of sample extracted during the enzyme reaction must equal 50 &mu;L. In this case, 20 &mu;L of enzyme reaction sample will be removed.</li>
 <li>Prepare 5 mL of TNBS solution at 10 mM by diluting 294 &mu;L of 5% (w/v) TNBS stock with 4706 &mu;L water, wrap in aluminium foil and keep on ice.</li>
 <li>Equilibrate the Eppendorf ThermoStat Plus at 37&deg;C. The ThermoStat Plus has 24 wells in 6 columns. See Figure 2 for schematic. Label 1.5 mL Eppendorf tubes indicating the identity of the nucleotide that will be tested (one per column): GTP (column A), GDP (column B), ppGpp (column C), pppGpp (column D), no nucleotide (column E), and protein samples (column F).</li>
 <li>Rack several boxes of 200 &mu;L tips such that each alternate row is omitted giving a total of four rows of tips. This is necessary for the use of the multi-channel pipette with the ThermoStat Plus heatblock during the enzyme assay.</li>
 <li>Equilibrate Digital Heatblock (VWR) at 42&deg;C.</li>
 <li>Place a 96-well 2.0 mL polypropylene plate on ice to cool.</li>
</ol>
2) LdcI Assay
<ol>
 <li>Aliquot 50 &mu;L of Solution A with the appropriate nucleotide to 1.5 mL Eppendorf tubes in each of the five columns of the Eppendorf ThermoStat.</li>
 <li>Add 330 &mu;L of Solution B to three tubes in column F and add 330 &mu;L of Solution C (the no-protein control) to the final tube in column F.</li>
 <li>Equilibrate the solutions at 37&deg;C for five minutes. Tip: after 5 minutes, cut off the caps of the tubes in the center of the heating-block to prevent them from interfering with the multichannel pipette to be used next.</li>
 <li>Using a 5-50 &mu;L VWR multi-channel pipette, transfer 50 &mu;L from the tubes in column F into each of the tubes in columns A-E. Start the timer as soon as the first tube is mixed.</li>
 <li>At 2, 4, and 6 minutes remove 20 &mu;L of sample using the multi-channel pipette and add to the stop solution.</li>
 <li>Note: samples in stop solution can be covered in plastic wrap and frozen at -20&deg;C for subsequent processing. The plates should be thawed at room temperature before reaction with TNBS.</li>
</ol>
3) TNBS Reaction and Color Development
<ol>
 <li>Add 50 &mu;L of 10 mM TNBS solution to the stop solution using the multi-channel pipette and then incubate at 42&deg;C for 6 minutes. The solution will turn a dark yellow/orange color as the TNBS reacts with the lysine and the cadaverine.</li>
 <li>After 6 minutes, cool the plate on ice to slow down the reaction.</li>
 <li>Remove 100 &mu;L of sample using a VWR 20-200 &mu;L multi-channel pipette and place in the 2 mL deep well plate that was cooled on ice. Transfer ice-bucket to the fumehood.</li>
 <li>Add 500 &mu;L toluene to each well using a HandyStep (Brand) repeat pipettor and 12.5 mL pipette tip (Plastibrand).</li>
 <li>Wipe away any excess toluene using a kimwipe and cover the plate with strips of packaging tape. Make sure to press down firmly to obtain a good seal. Cover the 96-well plate with a flat lid and then shake vigorously for 1 minute and 30 seconds.</li>
 <li>Leave the solutions to settle for 5 minutes. The TNP-cadaverine is now in the upper toluene phase, while the TNP-lysine remains water soluble (see Figure 1).</li>
 <li>Remove 200 &mu;L of toluene using the 20-200 &mu;L multi-channel pipette into a 96-well plate for reading. Note: make sure to check that each sample being removed is clear and does not have any of the bottom aqueous phase. Note: use barrier tips to prevent damage to multi-channel pipette by the toluene.</li>
 <li>Read absorbance at 340 nm in a SpectraMax 340 plate reader.</li>
 <li>To clean the quartz plate, rinse out the toluene with water and place the quartz plate in a large glass tray in the fume hood. Pour over 100 mL of a 7:3 mixture of 70% (v/v) nitric acid:95% (v/v) ethanol and cover the quartz plate with a second glass tray. Warning: the reaction is highly exothermic and sometimes explosive wear appropriate protection and ensure that the fume hood sash is set to the lower 6" level. After cooling, wash out nitric acid with water and then 95% ethanol.</li>
</ol>
4) Representative Results
1)Cadaverine Standard Curve (Figure 3) 
 The assay was performed as described but without any L-lysine or LdcI and instead various concentrations of cadaverine were used to empirically determine the linear range of the assay. The assay was linear to an OD340 of 0.25, corresponding to ~ 22 nmoles of cadaverine (Figure 3).
2)Activity of LdcI (Figure 4) 
 The activity of LdcI alone was determined to be 153.5 (&plusmn; 18.1) nmoles cadaverine min-1 &mu;g LdcI-1 at pH 6.5. The activity of LdcI is unaffected in the presence of 100 &mu;M GTP or GDP but is strongly inhibited (>10-fold) in the presence of pppGpp and ppGpp (Figure 4).
<img src="/files/ftp_upload/2094/2094fig1.jpg" alt="Figure 1" /> 
 Figure 1. Schematic diagram of the LdcI reaction. The decarboxylation reaction of L-lysine to generate CO2 and cadaverine is shown as well as the subsequent reaction with TNBS at high pH to generate N,N'-bistrinitrophenylcadaverine (TNP-cadaverine) and N,N'-bistrinitrophenyllysine (TNP-lysine). Based on Phan et al.11
<img src="/files/ftp_upload/2094/2094fig2.jpg" alt="Figure 2" /> 
 Figure 2. Setup of Eppendorf Thermostat. The layout of the samples in the 24-well Eppendorf ThermoStat is shown along with description of the steps of the assay (indicated in bold). Arrows indicate the transfer of reaction solutions according to the protocol. Removal of the reaction solution to the stop solution in the 96-well plate is also indicated.
<img src="/files/ftp_upload/2094/2094fig3.jpg" alt="Figure 3" /> 
 Figure 3. Cadaverine Standard Curve. A plot of absorbance at 340 nm versus nmoles of cadaverine is shown. Error bars represent the standard deviation of at least three independent measurements. The line of best fit is also shown and has an R2 of 0.996.
<img src="/files/ftp_upload/2094/2094fig4.jpg" alt="Figure 4" /> 
 Figure 4. LdcI assay results. A plot of the rate of LdcI activity (in nmoles cadaverine produced min-1 &mu;g-1 LdcI) is shown in the presence of 100 &mu;M GTP, GDP, pppGpp, ppGpp and in the absence of nucleotide. The stringent response nucleotides (p)ppGpp are capable of significantly inhibiting LdcI activity. The error bars represent the standard deviation of at least six independent measurements.

<ol>
	<li>Gale, E. F., Epps, H. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+the+pH+of+the+medium+during+growth+on+the+enzymic+activities+of+bacteria+(Escherichia+coli+and+Micrococcus+lysodeikticus)+and+the+biological+significance+of+the+changes+produced.">The effect of the pH of the medium during growth on the enzymic activities of bacteria (Escherichia coli and Micrococcus lysodeikticus) and the biological significance of the changes produced.</a> Biochem J. 36, 600-618 (1942).</li><li>Foster, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Escherichia+coli+acid+resistance:+tales+of+an+amateur+acidophile.">Escherichia coli acid resistance: tales of an amateur acidophile.</a> Nat Rev Microbiol. 2, 898-907 (2004).</li><li>Castanie-Cornet, M. P., Penfound, T. A., Smith, D., Elliott, J. F., Foster, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Control+of+acid+resistance+in+Escherichia+coli.">Control of acid resistance in Escherichia coli.</a> J Bacteriol. 181, 3525-3535 (1999).</li><li>Iyer, R., Williams, C., Miller, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Arginine-agmatine+antiporter+in+extreme+acid+resistance+in+Escherichia+coli.">Arginine-agmatine antiporter in extreme acid resistance in Escherichia coli.</a> J Bacteriol. 185, 6556-6561 (2003).</li><li>Sabo, D. L., Boeker, E. A., Byers, B., Waron, H., Fischer, E. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Purification+and+physical+properties+of+inducible+Escherichia+coli+lysine+decarboxylase.">Purification and physical properties of inducible Escherichia coli lysine decarboxylase.</a> Biochemistry. 13, 662-670 (1974).</li><li>Snider, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Formation+of+a+distinctive+complex+between+the+inducible+bacterial+lysine+decarboxylase+and+a+novel+AAA++ATPase.">Formation of a distinctive complex between the inducible bacterial lysine decarboxylase and a novel AAA+ ATPase.</a> J Biol Chem. 281, 1532-1546 (2006).</li><li>Kashiwagi, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Coexistence+of+the+genes+for+putrescine+transport+protein+and+ornithine+decarboxylase+at+16+min+on+Escherichia+coli+chromosome.">Coexistence of the genes for putrescine transport protein and ornithine decarboxylase at 16 min on Escherichia coli chromosome.</a> J Biol Chem. 266, 20922-20927 (1991).</li><li>Schneider, G., Kack, H., Lindqvist, Y. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+manifold+of+vitamin+B6+dependent+enzymes.">The manifold of vitamin B6 dependent enzymes.</a> Structure. 8, 1-6 (2000).</li><li>Cashel, M., Gentry, D. R., Hernandez, V. J., Vinella, D., Curtiss, R., Neidhardt, F. C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> Escherichia coli and Salmonella : cellular and molecular biology. , 1458-1496 (1996).</li><li>Magnusson, L. U., Farewell, A., Nystrom, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=ppGpp:+a+global+regulator+in+Escherichia+coli.">ppGpp: a global regulator in Escherichia coli.</a> Trends in Microbiology. 13, 236-242 (2005).</li><li>Phan, A. P., Ngo, T. T., Lenhoff, H. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Spectrophotometric+assay+for+lysine+decarboxylase.">Spectrophotometric assay for lysine decarboxylase.</a> Anal Biochem. 120, 193-197 (1982).</li><li>Park, Y. K., Bearson, B., Bang, S. H., Bang, I. S., Foster, J. W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Internal+pH+crisis,+lysine+decarboxylase+and+the+acid+tolerance+response+of+Salmonella+typhimurium.">Internal pH crisis, lysine decarboxylase and the acid tolerance response of Salmonella typhimurium.</a> Mol Microbiol. 20, 605-611 (1996).</li><li>Merrell, D. S., Camilli, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+cadA+gene+of+Vibrio+cholerae+is+induced+during+infection+and+plays+a+role+in+acid+tolerance.">The cadA gene of Vibrio cholerae is induced during infection and plays a role in acid tolerance.</a> Mol Microbiol. 34, 836-849 (1999).</li><li>Kanjee, U., Gutsche, I., Alexopoulos, E., Zhao, B., Bakkouri, M. E. l., Thibault, G., Liu, K., Ramachandran, S., Snider, J., Pai, E. F., Houry, W. A., A, W. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Linkage+between+the+Bacterial+Acid+Stress+and+Stringent+Responses+Revealed+by+the+Structure+of+the+Inducible+Lysine+Decarboxylase.">Linkage between the Bacterial Acid Stress and Stringent Responses Revealed by the Structure of the Inducible Lysine Decarboxylase.</a> EMBO Journal. 30, 931-944 (2011).</li></ol>

No conflicts of interest declared.

In the lysine decarboxylase assay, TNBS is reacted with the primary amines of L-lysine and cadaverine to form TNP-lysine and TNP-cadaverine adducts (Figure 1). Due to the presence of the carboxylic acid group on TNP-lysine, this adduct remains soluble in water while the TNP-cadaverine, lacking the carboxylic acid group, is capable of partitioning into toluene11. This type of assay can be utilized more broadly on other types of amino acids where the loss of a carboxylic acid group occurs during the reaction. Th...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>2,4,6-trinitrobenzensulfonic acid </td>
<td>&nbsp;</td>
<td>Sigma Aldrich</td>
<td>P2297</td>
<td>&nbsp;</td>
<tr>
<td>0.1 mM pyridoxal 5'-phosphate (PLP)</td>
<td>&nbsp;</td>
<td>Sigma Aldrich</td>
<td>P9255</td>
<td>&nbsp;</td>
<tr>
<td>Cadaverine</td>
<td>&nbsp;</td>
<td>Sigma Aldrich</td>
<td>D22606</td>
<td>&nbsp;</td>
<tr>
<td>96 well polystyrene plates</td>
<td>&nbsp;</td>
<td>Sarstedt</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>96-well quartz plate</td>
<td>&nbsp;</td>
<td>Hellma</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>VWR Digital Heatblock</td>
<td>&nbsp;</td>
<td>VWR</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>ThermoStat Plus</td>
<td>&nbsp;</td>
<td>Eppendorf</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>2.0 mL 96-well polypropylene plates</td>
<td>&nbsp;</td>
<td>Axygen</td>
<td>P-DW-20-C</td>
<td>&nbsp;</td>
<tr>
<td>Handy Step Repeat Pipettor</td>
<td>&nbsp;</td>
<td>Brand</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>12.5 mL Repeat Pipettor Tips</td>
<td>&nbsp;</td>
<td>Brand (Plastibrand)</td>
<td>702378</td>
<td>&nbsp;</td>
<tr>
<td>SpectraMax 340PC Plate Reader</td>
<td>&nbsp;</td>
<td>SpectraMax</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

an assay for measuring the activity of escherichia coli inducible lysine decarboxyase

Escherichia coli is an enteric bacterium that is capable of growing over a wide range of pH values (pH 5 - 9)1 and, incredibly, is able to survive extreme acid stresses including passage through the mammalian stomach where the pH can fall to as low as pH 1 - 22. To enable such a broad range of acidic pH survival, E. coli possesses four different inducible amino acid decarboxylases that decarboxylate their substrate amino acids in a proton-dependent manner thus raising the internal pH. The decarboxylases include the glutamic acid decarboxylases GadA and GadB3, the arginine decarboxylase AdiA4, the lysine decarboxylase LdcI5, 6 and the ornithine decarboxylase SpeF7. All of these enzymes utilize pyridoxal-5'-phospate as a co-factor8 and function together with inner-membrane substrate-product antiporters that remove decarboxylation products to the external medium in exchange for fresh substrate2. In the case of LdcI, the lysine-cadaverine antiporter is called CadB. Recently, we determined the X-ray crystal structure of LdcI to 2.0 &#197;, and we discovered a novel small-molecule bound to LdcI the stringent response regulator guanosine 5'-diphosphate,3'-diphosphate (ppGpp) 14. The stringent response occurs when exponentially growing cells experience nutrient deprivation or one of a number of other stresses9. As a result, cells produce ppGpp which leads to a signaling cascade culminating in the shift from exponential growth to stationary phase growth10. We have demonstrated that ppGpp is a specific inhibitor of LdcI 14. Here we describe the lysine decarboxylase assay, modified from the assay developed by Phan et al.11, that we have used to determine the activity of LdcI and the effect of pppGpp/ppGpp on that activity. The LdcI decarboxylation reaction removes the &alpha;-carboxy group of L-lysine and produces carbon dioxide and the polyamine cadaverine (1,5-diaminopentane)5. L-lysine and cadaverine can be reacted with 2,4,6-trinitrobenzensulfonic acid (TNBS) at high pH to generate N,N'-bistrinitrophenylcadaverine (TNP-cadaverine) and N,N&#8242;-bistrinitrophenyllysine (TNP-lysine), respectively11. The TNP-cadaverine can be separated from the TNP-lysine as the former is soluble in organic solvents such as toluene while the latter is not (See Figure 1). The linear range of the assay was determined empirically using purified cadaverine.

Watch this Scientific Journal Video about An Assay for Measuring the Activity of Escherichia coli Inducible Lysine Decarboxyase at JoVE.com

An Assay for Measuring the Activity of Escherichia coli Inducible Lysine Decarboxyase

The activity of the inducible lysine decarboxylase is monitored by reacting the substrate L-lysine and the product cadaverine with 2,4,6-trinitrobenzensulfonic acid to form adducts that have differential solubility in toluene.

An Assay for Measuring the Activity of Escherichia coli Inducible Lysine Decarboxyase

Escherichia coli is an enteric bacterium that is capable of growing over a wide range of pH values (pH 5 - 9)1 and, incredibly, is able to survive extreme ...

an-assay-for-measuring-activity-escherichia-coli-inducible-lysine

Research

JoVE Journal

Biology

14.1K Aufrufe.  University of Toronto. Die Aktivität der induzierbaren Lysin-Decarboxylase wird durch Umsetzung des Substrates L-Lysin und das Produkt Cadaverin mit 2,4,6-trinitrobenzensulfonic Säure-Addukte, die unterschiedliche Löslichkeit in Toluol Form überwacht.

Serie: An Assay for Measuring the Activity of Escherichia coli Inducible Lysine Decarboxyase

Measuring the Bending Stiffness of Bacterial Cells Using an Optical Trap

We developed a protocol to measure the bending rigidity of filamentous rod-shaped bacteria. Forces are applied with an optical trap, a microscopic three-dimensional spring made of light that is formed when a high-intensity laser beam is focused to a very small spot by a microscope's objective lens. To bend a cell, we first bind live bacteria to a chemically-treated coverslip. As these cells grow, the middle of the cells remains bound to the coverslip but the growing ends are free of this restraint. By inducing filamentous growth with the drug cephalexin, we are able to identify cells in which one end of the cell was stuck to the surface while the other end remained unattached and susceptible to bending forces. A bending force is then applied with an optical trap by binding a polylysine-coated bead to the tip of a growing cell. Both the force and the displacement of the bead are recorded and the bending stiffness of the cell is the slope of this relationship.

We present a protocol for bending filamentous bacterial cells attached to a cover-slip surface with an optical trap to measure the cellular bending stiffness.

We developed a protocol to measure the bending rigidity of filamentous rod-shaped bacteria. Forces are applied with an optical trap, a microscopic ...

High Throughput Screening of Fungal Endoglucanase Activity in Escherichia coli

Cellulase enzymes (endoglucanases, cellobiohydrolases, and &beta;-glucosidases) hydrolyze cellulose into component sugars, which in turn can be converted into fuel alcohols1. The potential for enzymatic hydrolysis of cellulosic biomass to provide renewable energy has intensified efforts to engineer cellulases for economical fuel production2. Of particular interest are fungal cellulases3-8, which are already being used industrially for foods and textiles processing.
Identifying active variants among a library of mutant cellulases is critical to the engineering process; active mutants can be further tested for improved properties and/or subjected to additional mutagenesis. Efficient engineering of fungal cellulases has been hampered by a lack of genetic tools for native organisms and by difficulties in expressing the enzymes in heterologous hosts. Recently, Morikawa and coworkers developed a method for expressing in E. coli the catalytic domains of endoglucanases from H. jecorina3,9, an important industrial fungus with the capacity to secrete cellulases in large quantities. Functional E. coli expression has also been reported for cellulases from other fungi, including Macrophomina phaseolina10 and Phanerochaete chrysosporium11-12. 
We present a method for high throughput screening of fungal endoglucanase activity in E. coli. (Fig 1) This method uses the common microbial dye Congo Red (CR) to visualize enzymatic degradation of carboxymethyl cellulose (CMC) by cells growing on solid medium. The activity assay requires inexpensive reagents, minimal manipulation, and gives unambiguous results as zones of degradation (&#x201C;halos&#x201D;) at the colony site. Although a quantitative measure of enzymatic activity cannot be determined by this method, we have found that halo size correlates with total enzymatic activity in the cell. Further characterization of individual positive clones will determine , relative protein fitness. 
Traditional bacterial whole cell CMC/CR activity assays13 involve pouring agar containing CMC onto colonies, which is subject to cross-contamination, or incubating cultures in CMC agar wells, which is less amenable to large-scale experimentation. Here we report an improved protocol that modifies existing wash methods14 for cellulase activity: cells grown on CMC agar plates are removed prior to CR staining. Our protocol significantly reduces cross-contamination and is highly scalable, allowing the rapid screening of thousands of clones. In addition to H. jecorina enzymes, we have expressed and screened endoglucanase variants from the Thermoascus aurantiacus and Penicillium decumbens (shown in Figure 2), suggesting that this protocol is applicable to enzymes from a range of organisms.

High Throughput Screening of Fungal Endoglucanase Activity in Escherichia coli

We describe a low cost, high throughput method to screen for fungal endoglucanase activity in E. coli. The method relies on a simple visual readout of substrate degradation, does not require enzyme purification, and is highly scalable. This allows for the rapid screening of large libraries of enzyme variants.

Cellulase enzymes (endoglucanases, cellobiohydrolases, and &beta;-glucosidases) hydrolyze cellulose into component sugars, which in turn can be converted ...

Application of MassSQUIRM for Quantitative Measurements of Lysine Demethylase Activity

Recently, epigenetic regulators have been discovered as key players in many different diseases 1-3. As a result, these enzymes are prime targets for small molecule studies and drug development 4. Many epigenetic regulators have only recently been discovered and are still in the process of being classified. Among these enzymes are lysine demethylases which remove methyl groups from lysines on histones and other proteins. Due to the novel nature of this class of enzymes, few assays have been developed to study their activity. This has been a road block to both the classification and high throughput study of histone demethylases. Currently, very few demethylase assays exist. Those that do exist tend to be qualitative in nature and cannot simultaneously discern between the different lysine methylation states (un-, mono-, di- and tri-). Mass spectrometry is commonly used to determine demethylase activity but current mass spectrometric assays do not address whether differentially methylated peptides ionize differently. Differential ionization of methylated peptides makes comparing methylation states difficult and certainly not quantitative (Figure 1A). Thus available assays are not optimized for the comprehensive analysis of demethylase activity.
Here we describe a method called MassSQUIRM (mass spectrometric quantitation using isotopic reductive methylation) that is based on reductive methylation of amine groups with deuterated formaldehyde to force all lysines to be di-methylated, thus making them essentially the same chemical species and therefore ionize the same (Figure 1B). The only chemical difference following the reductive methylation is hydrogen and deuterium, which does not affect MALDI ionization efficiencies. The MassSQUIRM assay is specific for demethylase reaction products with un-, mono- or di-methylated lysines. The assay is also applicable to lysine methyltransferases giving the same reaction products. Here, we use a combination of reductive methylation chemistry and MALDI mass spectrometry to measure the activity of LSD1, a lysine demethylase capable of removing di- and mono-methyl groups, on a synthetic peptide substrate 5. This assay is simple and easily amenable to any lab with access to a MALDI mass spectrometer in lab or through a proteomics facility. The assay has ~8-fold dynamic range and is readily scalable to plate format 5.

We present a method for using MALDI mass spectrometry and reductive methylation chemistry to quantify changes in lysine methylation.

Recently, epigenetic regulators have been discovered as key players in many different diseases 1-3. As a result, these enzymes are prime targets for small ...

Rapid Protocol for Preparation of Electrocompetent Escherichia coli and Vibrio cholerae

Electroporation has become a widely used method for rapidly and efficiently introducing foreign DNA into a wide range of cells. Electrotransformation has become the method of choice for introducing DNA into prokaryotes that are not naturally competent. Electroporation is a rapid, efficient, and streamlined transformation method that, in addition to purified DNA and competent bacteria, requires commercially available gene pulse controller and cuvettes. In contrast to the pulsing step, preparation of electrocompetent cells is time consuming and labor intensive involving repeated rounds of centrifugation and washes in decreasing volumes of sterile, cold water, or non-ionic buffers of large volumes of cultures grown to mid-logarithmic phase of growth. Time and effort can be saved by purchasing electrocompetent cells from commercial sources, but the selection is limited to commonly employed E. coli laboratory strains. We are hereby disseminating a rapid and efficient method for preparing electrocompetent E. coli, which has been in use by bacteriology laboratories for some time, can be adapted to V. cholerae and other prokaryotes. While we cannot ascertain whom to credit for developing the original technique, we are hereby making it available to the scientific community.

Rapid Protocol for Preparation of Electrocompetent Escherichia coli and Vibrio cholerae

Electroporation is a commonly employed method for introducing DNA into bacteria in a process known as transformation. Traditional protocols for the preparation of electrocompetent cells are time consuming and labor intensive. This article describes an alternate, rapid, and efficient method for the preparation of electrocompetent cells presently employed by some laboratories.

Electroporation has become a widely used method for rapidly and efficiently introducing foreign DNA into a wide range of cells. Electrotransformation has ...

Protocols for Implementing an Escherichia coli Based TX-TL Cell-Free Expression System for Synthetic Biology

Ideal cell-free expression systems can theoretically emulate an in vivo cellular environment in a controlled in vitro platform.1 This is useful for expressing proteins and genetic circuits in a controlled manner as well as for providing a prototyping environment for synthetic biology.2,3 To achieve the latter goal, cell-free expression systems that preserve endogenous Escherichia coli transcription-translation mechanisms are able to more accurately reflect in vivo cellular dynamics than those based on T7 RNA polymerase transcription. We describe the preparation and execution of an efficient endogenous E. coli based transcription-translation (TX-TL) cell-free expression system that can produce equivalent amounts of protein as T7-based systems at a 98% cost reduction to similar commercial systems.4,5 The preparation of buffers and crude cell extract are described, as well as the execution of a three tube TX-TL reaction. The entire protocol takes five days to prepare and yields enough material for up to 3000 single reactions in one preparation. Once prepared, each reaction takes under 8 hr from setup to data collection and analysis. Mechanisms of regulation and transcription exogenous to E. coli, such as lac/tet repressors and T7 RNA polymerase, can be supplemented.6 Endogenous properties, such as mRNA and DNA degradation rates, can also be adjusted.7 The TX-TL cell-free expression system has been demonstrated for large-scale circuit assembly, exploring biological phenomena, and expression of proteins under both T7- and endogenous promoters.6,8 Accompanying mathematical models are available.9,10 The resulting system has unique applications in synthetic biology as a prototyping environment, or "TX-TL biomolecular breadboard."

Protocols for Implementing an Escherichia coli Based TX-TL Cell-Free Expression System for Synthetic Biology

This five-day protocol outlines all steps, equipment, and supplemental software necessary for creating and running an efficient endogenous Escherichia coli based TX-TL cell-free expression system from scratch. With reagents, the protocol takes 8 hours or less to setup a reaction, collect, and process data.

Ideal cell-free expression systems can theoretically emulate an in vivo cellular environment in a controlled in vitro platform.1 This is useful for ...

Detection of Live Escherichia coli O157:H7 Cells by PMA-qPCR

A unique open reading frame (ORF) Z3276 was identified as a specific genetic marker for E. coli O157:H7. A qPCR assay was developed for detection of E. coli O157:H7 by targeting ORF Z3276. With this assay, we can detect as low as a few copies of the genome of DNA of E. coli O157:H7. The sensitivity and specificity of the assay were confirmed by intensive validation tests with a large number of E. coli O157:H7 strains (n = 369) and non-O157 strains (n = 112). Furthermore, we have combined propidium monoazide (PMA) procedure with the newly developed qPCR protocol for selective detection of live cells from dead cells. Amplification of DNA from PMA-treated dead cells was almost completely inhibited in contrast to virtually unaffected amplification of DNA from PMA-treated live cells. Additionally, the protocol has been modified and adapted to a 96-well plate format for an easy and consistent handling of a large number of samples. This method is expected to have an impact on accurate microbiological and epidemiological monitoring of food safety and environmental source.

Detection of Live Escherichia coli O157:H7 Cells by PMA-qPCR

A qPCR assay was developed for detection of Escherichia coli O157:H7 targeting a unique genetic marker, Z3276. The qPCR was combined with propidium monoazide (PMA) treatment for live cell detection. This protocol has been modified and adapted to a 96-well plate format for easy and consistent handling of numerous samples

A unique open reading frame (ORF) Z3276 was identified as a specific genetic marker for E. coli O157:H7. A qPCR assay was developed for detection of E. ...

Green Fluorescent Protein-based Expression Screening of Membrane Proteins in Escherichia coli

The production of recombinant membrane proteins for structural and functional studies remains technically challenging due to low levels of expression and the inherent instability of many membrane proteins once solubilized in detergents. A protocol is described that combines ligation independent cloning of membrane proteins as GFP fusions with expression in Escherichia coli detected by GFP fluorescence. This enables the construction and expression screening of multiple membrane protein/variants to identify candidates suitable for further investment of time and effort. The GFP reporter is used in a primary screen of expression by visualizing GFP fluorescence following SDS polyacrylamide gel electrophoresis (SDS-PAGE). Membrane proteins that show both a high expression level with minimum degradation as indicated by the absence of free GFP, are selected for a secondary screen. These constructs are scaled and a total membrane fraction prepared and solubilized in four different detergents. Following ultracentrifugation to remove detergent-insoluble material, lysates are analyzed by fluorescence detection size exclusion chromatography (FSEC). Monitoring the size exclusion profile by GFP fluorescence provides information about the mono-dispersity and integrity of the membrane proteins in different detergents. Protein: detergent combinations that elute with a symmetrical peak with little or no free GFP and minimum aggregation are candidates for subsequent purification. Using the above methodology, the heterologous expression in E. coli of SED (shape, elongation, division, and sporulation) proteins from 47 different species of bacteria was analyzed. These proteins typically have ten transmembrane domains and are essential for cell division. The results show that the production of the SEDs orthologues in E. coli was highly variable with respect to the expression levels and integrity of the GFP fusion proteins. The experiment identified a subset for further investigation.

Green Fluorescent Protein-based Expression Screening of Membrane Proteins in Escherichia coli

A streamlined approach to screening for the expression of recombinant membrane proteins in Escherichia coli based on fusion to green fluorescent protein is presented.

The production of recombinant membrane proteins for structural and functional studies remains technically challenging due to low levels of expression and ...

The Multifaceted Benefits of Protein Co-expression in Escherichia coli

We report here that the expression of protein complexes in vivo in Escherichia coli can be more convenient than traditional reconstitution experiments in vitro. In particular, we show that the poor solubility of Escherichia coli DNA polymerase III &#949; subunit (featuring 3&#8217;-5&#8217; exonuclease activity) is highly improved when the same protein is co-expressed with the &#945; and &#952; subunits (featuring DNA polymerase activity and stabilizing &#949;, respectively). We also show that protein co-expression in E. coli can be used to efficiently test the competence of subunits from different bacterial species to associate in a functional protein complex. We indeed show that the &#945; subunit of Deinococcus radiodurans DNA polymerase III can be co-expressed in vivo with the &#949; subunit of E. coli. In addition, we report on the use of protein co-expression to modulate mutation frequency in E. coli. By expressing the wild-type &#949; subunit under the control of the araBAD promoter (arabinose-inducible), and co-expressing the mutagenic D12A variant of the same protein, under the control of the lac promoter (inducible by isopropyl-thio-&#946;-D-galactopyranoside, IPTG), we were able to alter the E. coli mutation frequency using appropriate concentrations of the inducers arabinose and IPTG. Finally, we discuss recent advances and future challenges of protein co-expression in E. coli.

The Multifaceted Benefits of Protein Co-expression in Escherichia coli

Protein co-expression is a powerful alternative to the reconstitution in vitro of protein complexes, and is of help in performing biochemical and genetic tests in vivo. Here we report on the use of protein co-expression in Escherichia coli to obtain protein complexes, and to tune the mutation frequency of cells.

We report here that the expression of protein complexes in vivo in Escherichia coli can be more convenient than traditional reconstitution experiments in ...

Residue-specific Incorporation of Noncanonical Amino Acids into Model Proteins Using an Escherichia coli Cell-free Transcription-translation System

The canonical set of amino acids leads to an exceptionally wide range of protein functionality. Nevertheless, the set of residues still imposes limitations on potential protein applications. The incorporation of noncanonical amino acids can enlarge this scope. There are two complementary approaches for the incorporation of noncanonical amino acids. For site-specific incorporation, in addition to the endogenous canonical translational machineries, an orthogonal aminoacyl-tRNA-synthetase-tRNA pair must be provided that does not interact with the canonical ones. Consequently, a codon that is not assigned to a canonical amino acid, usually a stop codon, is also required. This genetic code expansion enables the incorporation of a noncanonical amino acid at a single, given site within the protein. The here presented work describes residue-specific incorporation where the genetic code is reassigned within the endogenous translational system. The translation machinery accepts the noncanonical amino acid as a surrogate to incorporate it at canonically prescribed locations, i.e., all occurrences of a canonical amino acid in the protein are replaced by the noncanonical one. The incorporation of noncanonical amino acids can change the protein structure, causing considerably modified physical and chemical properties. Noncanonical amino acid analogs often act as cell growth inhibitors for expression hosts since they modify endogenous proteins, limiting in vivo protein production. In vivo incorporation of toxic noncanonical amino acids into proteins remains particularly challenging. Here, a cell-free approach for a complete replacement of L-arginine by the noncanonical amino acid L-canavanine is presented. It circumvents the inherent difficulties of in vivo expression. Additionally, a protocol to prepare target proteins for mass spectral analysis is included. It is shown that L-lysine can be replaced by L-hydroxy-lysine, albeit with lower efficiency. In principle, any noncanonical amino acid analog can be incorporated using the presented method as long as the endogenous in vitro translation system recognizes it.

Residue-specific Incorporation of Noncanonical Amino Acids into Model Proteins Using an Escherichia coli Cell-free Transcription-translation System

An easy-to-use, cell-free expression protocol for the residue-specific incorporation of noncanonical amino acid analogs into proteins, including downstream analysis, is presented for medical, pharmaceutic, structural and functional studies.

The canonical set of amino acids leads to an exceptionally wide range of protein functionality. Nevertheless, the set of residues still imposes ...

Measuring Lactase Enzymatic Activity in the Teaching Lab

Understanding how enzymes work, and relating this to real life examples, is critical to a wide range of undergraduate degrees in the biological and biomedical sciences. This easy to follow protocol was developed for first year undergraduate pharmacy students and provides an entry-level introduction to enzyme reactions and analytical procedures for enzyme analysis. The enzyme of choice is lactase, as this represents an example of a commercially available enzyme relevant to human disease/pharmaceutical practice. Lactase is extracted from dietary supplement tablets, and assessed using a colorimetric assay based upon hydrolysis of an artificial substrate for lactase (ortho-nitrophenol-beta-D-galactopyranoside, ONPG). Release of ortho-nitrophenol following the hydrolytic cleavage of ONPG by lactase is measured by a change in absorbance at 420 nm, and the effect of the temperature on the enzymatic reaction is evaluated by carrying out the reaction on ice, at room temperature and at 37 &#176;C. More advanced analysis can be implemented using this protocol by assessing the enzyme activity under different conditions and using different reagents.

The enzymatic activity of lactase is essential for the catabolic processing of the disaccharide lactose. Here, the activity of lactase found in dietary supplements is assayed using a colorimetric assay. This provides students with an experimental platform for understanding the activity of lactase and enzyme kinetics.

Understanding how enzymes work, and relating this to real life examples, is critical to a wide range of undergraduate degrees in the biological and ...