The author thanks Dr. Matthias Mann for the continuous support and Mrs. Katharina Zettl for demonstrating the method. 
This work was supported by the Max-Planck Society for the Advancement of Science.

1. Instrumentation Required
<ol>
	<li>Preparation of tissue slices for microdissection and sample lysis
	<ol>
		<li>Thermoblock set to 99 &deg;C or a bath with boiling water.</li>
		<li>Laser operating microdissector (for example PALM, Zeiss, G&ouml;ttingen, Germany).</li>
		<li>Thermostated bench-top centrifuge, temperature set to 20 &deg;C.</li>
		<li>Wet chamber (box) with a rack for Eppendorf-type disposal tubes.</li>
		<li>Incubator set to 37 &deg;C.</li>
		<li>Spectrofluorometer enabling measuring of fluorescence excited near UV light with micro-scale quartz cuvettes (0.1-0.2 ml).</li>
	</ol>
	</li>
</ol>
2. Solutions
<ol>
	<li>'Tissue Lysis Buffer' (TLB): of 0.1 M Tris-HCl, pH 8.0, 0.1 M DTT, 0.5% (w/v) polyethylene glycol 20,000 and 4% SDS.</li>
	<li>UA solution: 8 M urea in 0.1 M Tris-HCl pH 8.5. Prepare 1 ml per 1 sample. UA and IAA solutions have to be prepared freshly and used within a day.</li>
	<li>IAA solution: 0.05 M iodoacetamide in UA. Prepare 0.1 ml per 1 sample.</li>
	<li>Endoproteinase Lys-C, stock solution.</li>
	<li>Trypsin, stock solution.</li>
	<li>'Digestion buffer' (DB): 0.05 M Tris-HCl pH 8.5. Prepare 0.25 ml per 1 sample.</li>
	<li>'Tryptophan Standard Solution': 0.1 &mu;g tryptophan in 1 ml deionized water.</li>
	<li>'Assay buffer B' (ABB): 10 mM Tris-HCl, pH 7.6.</li>
	<li>Stock solution of Britton &amp; Robinson Universal Buffer (BRUB). Prepare a solution containing 0.1 M CH3COOH, 0.1 M H3PO4, and 0.1 M H3BO3 and adjust with 1 M NaOH to the required pH (2, 4, 5, 6, and 11). Before use dilute 5-fold with deionized water.</li>
	<li>Buffer A: 1% (v/v) CH3COOH in deionized water.</li>
	<li>Buffer B: 60% (v/v) CH3CN, 1% (v/v) CH3COOH in deionized water.</li>
</ol>
3. Pipette Tip and 'StageTip' Columns
<ol>
	<li>Prepare SAX tip-column by stacking 6 layers of Empore- Anion membrane in a common 0.2 ml pipette tip. Make two SAX-tip columns per sample.</li>
	<li>Prepare 'StageTip' by stacking 3 layers of Empore-C18 in a 0.2 ml pipette tip. Make 6 Stage tips for each sample.</li>
</ol>
4. Preparation of Tissue Slices for Microdissection and Sample Lysis
<ol>
	<li>Cut sections with a microtome (the thickness of the slices depends on the sample. Usually microdissection works well with slices of 7-10 &mu;m).</li>
	<li>Irradiate membrane slides (MembraneSlide 1.0 PEN) with UV-light for 45 min.</li>
	<li>Mount the sections on the irradiate membrane slides and dry at 37 &deg;C for 2 hr.</li>
	<li>Deparaffinize the mounted sections by two successive incubations in xylene for 2.5 min and 1.5 min. Rehydrate the sections by consecutive incubations in absolute ethanol, 70% ethanol, and water, each for 1 min.</li>
	<li>Stain the sections with Mayer's hematoxylin for 20 sec, rinse with water for 1 min, and air-dry.</li>
	<li>Collect the cell population of interest using laser capture microdissection system. When using the PALM instrument (Zeiss) collect the samples in the adhesive caps (Adhesive CAP 200).</li>
	<li>Pipette an aliquot of the TLB over the microdissected material in the cap. Close the tube and collect the suspension by a short centrifugation. Lyse the microdissected tissue at 99 &deg;C in a heating block with agitation (600 rpm) for 1 hr. Use 3 &mu;l of buffer for 10 nl of the microdissected tissue.</li>
	<li>Clarify the crude extract by centrifugation at 16,000 x g at 18 &deg;C for 10 min. The lysate can be stored frozen at -20 &deg;C.</li>
</ol>
5. Sample Processing
<ol>
	<li>Mix up to 50 &mu;l of the clarified lysate with 200 &mu;l of UA in the ultrafiltration units (Forensic 30k) and centrifuge at 14,000 x g until less than 10 &mu;l of the solution will remain in the filter. Usually this step requires 10-15 min centrifugation.</li>
	<li>Pipette 200 &mu;l of UA to the ultrafiltration unit and centrifuge as in 5.1. Empty the collection tube.</li>
	<li>Pipette 50 &mu;l of IAA solution and mix at 600 rpm in a thermo-mixer for 1 min and centrifuge as in 5.1.</li>
	<li>Pipette 100 &mu;l of UA to the ultrafiltration unit and centrifuge as in 5.1. Repeat this step twice</li>
	<li>Pipette 100 &mu;l of the DB to the ultrafiltration unit and centrifuge at in 5.1. Repeat this step twice.</li>
	<li>Transfer the filtration units to new collection tubes. Pipette 40 &mu;l DB with endoproteinase Lys-C (proteinase to total protein ratio of 1:100) and mix at 600 rpm in thermo-mixer for 1 min. Incubate the units in a wet chamber at 37 &deg;C for 18 hr.</li>
	<li>Centrifuge the filter units at 14,000 x g such as in 5.1.</li>
	<li>Pipette 160 &mu;l of deionized water and centrifuge the filter units as in 5.1. The pooled flow-through (5.7 and 5.8 steps) contains the peptides released by endoproteinase Lys C.</li>
	<li>Transfer the ultrafiltration unit to a new collection tube. Add 40 &mu;l DB with trypsin (enzyme to protein ratio 1:100) and mix at 600 rpm in thermo-mixer for 1 min. Incubate the units in a wet chamber at 37 &deg;C for 4 hr. Repeat steps 5.7 and 5.8 to collect the tryptic peptides.</li>
</ol>
6. Quantitation of the Peptides
<ol>
	<li>The measurement of the peptide content in the protein digests can be performed in diluted buffer because the tryptophan residues are well accessible to the solvent.</li>
	<li>Pipette 0.2 ml of ABB into the quartz cuvette and record the emission spectrum for 'blank'.</li>
	<li>Prepare calibration curve using 0.1 &mu;g steps by adding 1 &mu;l aliquots of TSS to the cuvette and gentle mix with the ABB.</li>
	<li>Clean the cuvette.</li>
	<li>Pipette the sample and record the spectrum (sample).</li>
	<li>Calculate of the protein and peptide concentration 
	Since 0.1 &mu;g tryptophan corresponds to about 9 &mu;g protein (based on the average 1.1% of the tryptophan content in protein mixtures obtained by lysing human cells) the protein content of the in the sample or peptide content in the digest equals: 
	<img alt="Equation 1" fo:content-width="2.787in" fo:src="/files/ftp_upload/50589/50589eq1highres.jpg" src="/files/ftp_upload/50589/50589eq1.jpg" /> 
	where F(Standard1) is the fluorescence of 0.1 &mu;g tryptophan standard. The peptide content allows calculation of the yield of the digestion procedure and provides essential information for following peptide fractionation and mass spectrometric analysis.</li>
</ol>
7. Fractionation of the Lys-C and Tryptic Peptides
<ol>
	<li>Dilute the peptide solutions obtained by digestions with Lys-C and trypsin with 0.2 ml of BRUB pH 11 and pH 5, respectively.</li>
	<li>Assemble the SAX tip-column in the centrifugal tube adapter lid.</li>
	<li>Wash and equilibrate the SAX tip-column successively with 0.1 ml of methanol, 0.1 ml of 1 M NaOH, and 3 times with 0.1 ml of BRUB, pH 11 for the separation of Lys-C peptides and with BRUB, pH 5 for the tryptic peptides. The flow of the solutions through the column material is facilitated by centrifugation at 4,000 x g.</li>
	<li>Wash and equilibrate the C18-'StageTips' subsequently with, 0.05 ml of methanol, then with 0.05 ml of Buffer B and with 0.05 ml of Buffer A. Prepare six C18-'StageTips'; 4 for the separation of the Lys-C peptides and two for the separation of the tryptic peptides.</li>
	<li>Assemble the SAX Tip-column in the C18-'StageTip'. Load the sample solutions into the equilibrated SAX Tip-columns and centrifuge the columns at 5,000 x g for 3 min.</li>
	<li>Equilibrate the 'pipette-tip' columns with 0.1 ml of the BRUB, pH 11 or pH 5, respectively to the Lyc-C and tryptic samples. Facilitate the flow by centrifugation at 5,000 x g.</li>
	<li>Transfer the SAX Tip-column to the next C18-'StageTip'.</li>
	<li>Continue eluting of the peptides with BRUB pH 6, 4, and 2 for the Lys C sample and with BRUB pH 2 for the sample with tryptic peptides. For each elution step use a separate C18-'StageTip'.</li>
	<li>Wash the C18-'StageTips' with 0.05 ml of Buffer A.</li>
	<li>Elute fractions with 0.05 ml of Buffer B into vials used directly for injection of the samples into LC system assembled with a mass spectrometer.</li>
</ol>

<ol>
	<li>Nagaraj, N., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Deep+proteome+and+transcriptome+mapping+of+a+human+cancer+cell+line.">Deep proteome and transcriptome mapping of a human cancer cell line.</a> Molecular systems biology. 7, 548 (2011).</li><li>Beck, M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+quantitative+proteome+of+a+human+cell+line.">The quantitative proteome of a human cell line.</a> Molecular systems biology. 7, 549 (2011).</li><li>Wisniewski, J. R., Dus, K., Mann, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Proteomic+workflow+for+analysis+of+archival+formalin-fixed+and+paraffin-embedded+clinical+samples+to+a+depth+of+10+000+proteins.+Proteomics.">Proteomic workflow for analysis of archival formalin-fixed and paraffin-embedded clinical samples to a depth of 10 000 proteins. Proteomics.</a> Clin. Appl. 7 (3-4), 225-233 (2013).</li><li>Magdeldin, S., Yamamoto, T. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Toward+deciphering+proteomes+of+formalin-fixed+paraffin-embedded+(FFPE)+tissues.">Toward deciphering proteomes of formalin-fixed paraffin-embedded (FFPE) tissues.</a> Proteomics. 12 (7), 1045-1058 (2012).</li><li>Ostasiewicz, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Proteome,+phosphoproteome,+and+N-glycoproteome+are+quantitatively+preserved+in+formalin-fixed+paraffin-embedded+tissue+and+analyzable+by+high-resolution+mass+spectrometry.">Proteome, phosphoproteome, and N-glycoproteome are quantitatively preserved in formalin-fixed paraffin-embedded tissue and analyzable by high-resolution mass spectrometry.</a> J. Proteome Res. 9 (7), 3688-36700 (2010).</li><li>Wisniewski, J. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Universal+sample+preparation+method+for+proteome+analysis.">Universal sample preparation method for proteome analysis.</a> Nature. 6 (5), 359-362 (2009).</li><li>Wisniewski, J. R., Ostasiewicz, P., Mann, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=High+recovery+FASP+applied+to+the+proteomic+analysis+of+microdissected+formalin+fixed+paraffin+embedded+cancer+tissues+retrieves+known+colon+cancer+markers.">High recovery FASP applied to the proteomic analysis of microdissected formalin fixed paraffin embedded cancer tissues retrieves known colon cancer markers.</a> Journal of proteome research. 10 (7), 3040-3049 (2011).</li><li>Wisniewski, J. R., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extensive+quantitative+remodeling+of+the+proteome+between+normal+colon+tissue+and+adenocarcinoma.">Extensive quantitative remodeling of the proteome between normal colon tissue and adenocarcinoma.</a> Mol. Syst. Biol. 8, 611 (2012).</li><li>Wisniewski, J. R., Mann, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Consecutive+proteolytic+digestion+in+an+enzyme+reactor+increases+depth+of+proteomic+and+phosphoproteomic+analysis.">Consecutive proteolytic digestion in an enzyme reactor increases depth of proteomic and phosphoproteomic analysis.</a> Anal. Chem. 84 (6), 2631-2637 (2012).</li><li>Wisniewski, J. R., Zougman, A., Mann, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Combination+of+FASP+and+StageTip-based+fractionation+allows+in-depth+analysis+of+the+hippocampal+membrane+proteome.">Combination of FASP and StageTip-based fractionation allows in-depth analysis of the hippocampal membrane proteome.</a> J. Proteome Res. 8 (12), 5674-5678 (2009).</li><li>Rappsilber, J., Ishihama, Y., Mann, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Stop+and+go+extraction+tips+for+matrix-assisted+laser+desorption/ionization,+nanoelectrospray,+and+LC/MS+sample+pretreatment+in+proteomics.">Stop and go extraction tips for matrix-assisted laser desorption/ionization, nanoelectrospray, and LC/MS sample pretreatment in proteomics.</a> Anal. Chem. 75 (3), 663-670 (2003).</li><li>Thompson, S. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Impact+of+pre-analytical+factors+on+the+proteomic+analysis+of+formalin-fixed+paraffin-embedded+tissue.">Impact of pre-analytical factors on the proteomic analysis of formalin-fixed paraffin-embedded tissue.</a> Proteomics Clin. Appl. , (2012).</li></ol>

The author has nothing to disclose.

The ability to study the FFPE material by the proteomic technology to a depth comparable with nucleic acid sequencing and microarray techniques opens new perspectives in biomarker and drug target discovery. The described protocol enables characterization and quantitation of proteomes of populations of microdissected cells on a scale of 10,000 proteins. When using less of the microdissected material a smaller datasets can be generated, but perhaps in many cases those can also provide valuable clinical data. Thus, either the samples can be analyzed directly after the MED-FASP procedure or can be separated in less fractions. Since FASP procedure is compatible with any type of protease, other enzymes or their combination can be used from protein digestions 6.
The quality of the FFPE material appears to be the most critical issue of the analysis. We have experienced that the fixed tissue of the same origin but coming from different clinics had distinct properties. Using tissue from one source we were able to generate peptides at high yields, whereas similar material from another clinic was almost useless. It is likely that the applied fixation and embedding procedures as well as storage conditions are the major factors affecting the properties of the clinical material 12. Therefore it is advisable to test the properties of few samples before starting a larger project.
Many publications reported the use of the FFPE material in the past. However, the number of proteins identified in these studies never exceeded more than 1,000-2,000 proteins 4. Considering the size of the human cell specific proteomes comprising more than 10,000 proteins, such studies were able only to provide a very superficial picture, almost limited to highly abundant proteins involved in housekeeping functions. Our protocol enables efficient isolation of the clinical or biological material from preserved tissue and is optimized for lysis, protein processing and peptide prefractionation. As a consequence our sample preparation workflow, when coupled to the high-end mass spectrometry, allows insights into a nearly complete proteomes. Notable, this is possible at minute sample amount requirements.
The major advantage of using the preserved tissues is their relative wide availability. FFPE samples archived for many years and decades, and sometimes considered as useless, now, thanks to proteomic technology, appear as highly valuable material for clinical research. Whereas many diseases can be studied using fresh or frozen material investigation of FFPE material seems to be particularly important for studying rare diseases 12, were collection of a representative set of sample takes usually a long time.

Fixing with paraformaldehyde and embedding in paraffin (FFPE) is the standard method for preservation and pathomorphologic investigation of clinical tissue material. Microscopy of the preserved tissue allows identification of disease related morphological changes, and detection and scoring of occurrence of disease related antigens. Since typically only a small portion of the FFPE sample is used in these analyses, large amounts of clinical material remain archived and can be exploited in other types of studies.
During the recent decade the research in life sciences has been strengthened by the powerful proteomic technology. This technology allows identification and quantitation of thousands of proteins in complex protein mixtures. An important feature of the technology is that only minute amounts of material are needed for large scale analyses. Recent proteomic studies demonstrated that proteins can be studied on a scale of nearly complete proteomes 1, 2. This type of investigations enables system wide insights in the composition of the cells and identification of groups of proteins occurring at anomalous levels in diseases. Whereas these studies required large mass spectrometric capacities, the recent work has demonstrated that similar extent of identification can be achieved within a single day of measurement 3.
The requirement of relatively low sample amount and the wide availability of the preserved clinical samples tempted us and others to develop methods enabling proteomic exploration of the FFPE material (for a review see 4). Taking advantage of the reversibility of the formalin fixation under a heat treatment we have developed a protocol allowing quantitative extraction of proteins from the fixed tissue 5. We have shown that the fixation procedure preserves not only proteins, but also at least some posttranslational modifications. Phosphorylation and N-glycosylation can be studied using the FFPE samples 5, however a prerequisite for it is a thoroughly controlled tissue collection, storage and fixation conditions. Next, we have optimized the method for a laser capture microdissection of the fixed tissue and for the proteomic reactor based sample processing 6, 7. A large scale study on colorectal cancer allowed quantitative analysis of 7,500 proteins from microdissected from clinical material 8. Finally, we have improved the way of exploration of microdissected material by applying consecutive-two step protein digestion protocol 9. In comparison to the common digestion strategies using single enzyme, this procedure enables generation of more sequence-unique peptides and, consequently, results in a higher depth of protein identification. Analysis of microdissected human colonic adenoma allowed proteomic analysis to a depth of 9,500 proteins per sample 3. In this study we mapped 55,000 peptides per sample allowing identification of 88-89% proteins with at least 2 peptides. Here we present an optimized protocol for preparation of samples from the FFPE material for LC-MS/MS analysis. This protocol comprises preparation of tissue slices for microdissection, lysis of the isolated cells, and sample processing in a reactor format (FASP) 6. Then we describe a spectrofluorometric determination of peptide yields; a task with high importance for optimal peptide identification by the mass spectrometry. Finally, we demonstrate a strong anion exchanger (SAX)-based separation technique for peptide fractionation. In this method both the peptide separation and final cleanup are carried out using pipette-tip microcolumns 10, 11. This step is optional but is recommended in studies in which more than few microgram peptides can be obtained from a single sample. The SAX-fractionation can substantially increase the number and dynamic range of identifications and extend the protein sequence coverage 3, 10.

<table border="1">
		<tbody>
		 <tr>
			<td>Name of the reagent</td>
			<td>Company</td>
			<td>Catalogue number</td>
			<td>Comments (optional)</td>
		 </tr>
		 <tr>
			<td>MembraneSlide 1.0 PEN</td>
			<td>Carl-Zeiss Microscopy GmBH, Goettingen, Germany</td>
			<td>415190-9041-000</td>
			<td></td>
		 </tr>
		 <tr>
			<td>Adhesive Cap 200 opaque</td>
			<td>Carl-Zeiss Microscopy GmBH, Goettingen, Germany</td>
			<td>415190-9181-000</td>
			<td></td>
		 </tr>
		 <tr>
			<td>Mayer's hematoxylin solution </td>
			<td>Sigma-Aldrich St. Louis, MO</td>
			<td>MHS32</td>
			<td></td>
		 </tr>
		 <tr>
			<td>Forensic 30k </td>
			<td>Merck Millipore Darmstadt, Germany</td>
			<td>MRCF0R030 </td>
			<td>(Previously sold as Microcon YM-30) </td>
		 </tr>
		 <tr>
			<td>Empore Anion</td>
			<td>Bioanalytical technologies 3M Company ST. Paul, MN </td>
			<td>2252</td>
			<td></td>
		 </tr>
		 <tr>
			<td>Empore C18</td>
			<td>Bioanalytical technologies 3M Company ST. Paul, MN</td>
			<td>2215</td>
			<td></td>
		 </tr>
		 <tr>
			<td>Trypsin </td>
			<td>Promega </td>
			<td>2014-06-27</td>
			<td></td>
		 </tr>
		 <tr>
			<td>Endoproteinase Lys-C</td>
			<td>Wako</td>
			<td>129-02541</td>
			<td></td>
		 </tr>
		</tbody>
 </table>

proteomic sample preparation from formalin fixed and paraffin embedded tissue

Preserved clinical material is a unique source for proteomic investigation of human disorders. Here we describe an optimized protocol allowing large scale quantitative analysis of formalin fixed and paraffin embedded (FFPE) tissue. The procedure comprises four distinct steps. The first one is the preparation of sections from the FFPE material and microdissection of cells of interest. In the second step the isolated cells are lysed and processed using 'filter aided sample preparation' (FASP) technique. In this step, proteins are depleted from reagents used for the sample lysis and are digested in two-steps using endoproteinase LysC and trypsin. 
After each digestion, the peptides are collected in separate fractions and their content is determined using a highly sensitive fluorescence measurement. Finally, the peptides are fractionated on 'pipette-tip' microcolumns. The LysC-peptides are separated into 4 fractions whereas the tryptic peptides are separated into 2 fractions. In this way prepared samples allow analysis of proteomes from minute amounts of material to a depth of 10,000 proteins. Thus, the described workflow is a powerful technique for studying diseases in a system-wide-fashion as well as for identification of potential biomarkers and drug targets.

Proteomic analysis of FFPE material requires robust and reproducible methods for sample preparation. In this publication we demonstrate a protocol allowing effective isolation of cell populations from the fixed material and their chemical processing resulting in high purity peptide fractions that can be directly used for LC-MS/MS analysis. The procedure consist of four distinct parts: (1) preparation of sections of the FFPE samples and its microdissection, (2) lysis of the sample and processing of the proteins using MED FASP approach, and (3) quantitation and (4) fractionation of the peptides (Figure 1).
In the first step of the procedure the FFPE samples are sectioned with a microtome and mounted on membrane covered slides. To increase the adhesion between the tissue sections and the surface of the slide membrane is necessary to irradiate the slide surface with UV light. For this purpose we use the light of a UV lamp integrated in to a cell culture bench. After this step the slides are subjected to washes allowing removal of paraffin and rehydration of the samples. The rehydrated material is stained with hematoxilin for a short time. This results in a weak staining of the sample but is sufficient for visualization of the sample areas for microdissection. The staining process has to be stopped rapidly by rinsing of the slides with an excess of water. A prolonged staining of the sample results in poor peptide yields.
In the next step the dried sections are subjected to microdissection. The selection of the tissue areas of individual cells depends on the type of investigation and always requires specific knowledge in histology or pathomorphology. The laser-released material is collected on adhesive surfaces of the sample collection tubes. Since the binding capacity of the adhesive material is limited it is necessary to transfer the microdissected material from the lid to the tube after dissection of every 3-5 mm2 of the sample. This can be easily done by pipetting of a few microliters of the tissue lysis buffer (LTB) onto the lid and a short spinning of the tube in a centrifuge. After the sample is collected in the bottom of the tube, the microdissection and the sample collection on the lid can be continued. Once the whole sample is collected the tubes have to be additionally stoppered with Parafilm and incubated in a water bath at about 99 &deg;C with continuous agitation for 1 hr. Since during the incubation water condenses on the lid, every 15 min the tubes have to be shortly centrifuged to collect back the water in the tube cone.
To obtain peptides the tissue lysates are processed using the MED-FASP approach. In this method the lysed proteins are depleted from the detergent and other low molecular weight substances, carboamidomethylated at cysteinyl residues, and then consecutively digested with two enzymes differing in their cleavage specificities: endoproteinase LysC and trypsin. After each digestion step the peptides are collected into separate fractions. In this part of the sample preparation it is important to continue each of the centrifugation steps until more than 95% of the solution initially loaded into the filtration unit passed the membrane. Analyzing colonic tissue and its cancer we observed that this procedure yields 3-6 &mu;g of peptide per 100 nl (100 &mu;g tissue or 10 mm2 of a 10 &mu;m section) of the microdissected material (Table 1). Since the extractable total protein from tissues is about 10% of the tissue weight the extraction and digestion procedures together result in a 30-60% yield in the respect to the original fresh tissue. These values reflect losses of the protein during dehydration and staining, microdissection, and retention of the portion of the undigested sample in the ultrafiltration units. Because extraction and processing of non-microdissected FFPE tissue resulted in protein-to-peptide-conversion yield of 75% 5 it is likely that the critical sample losses occur during the steps before MED-FASP. An important feature of the peptide mixtures obtained by this procedure is their high purity which facilitates further fractionation peptide fractionation process and the mass spectrometry identification. This has recently been shown by an analysis of colorectal adenoma samples 3. In that study about 40% of the MS/MS events led to identification of peptides from the FFPE tissue and resulted in mapping of up to 17,000 peptides per single LC-MS/MS run. Higher identification rates have been achieved only in analysis of frozen in vitro cultured cells 3.
In the two last parts of the whole procedure the isolated peptides are quantified and fractionated on pipette-tip microcolumns. Since the amounts of peptide isolated from the microdissected tissue are below 10 &mu;g they cannot be quantified using commonly used dye-based protein assays. Also the A280 UV-spectral measurements at these concentrations are not useful due to light scattering effect. In contrast, measurements of fluorescence of the tryptophan residues offer a reliable way for determination of the peptide content.
Recently we have shown that up to 5,000 proteins from cultured cells can be identified in a 'single shot' 4 hr LC-MS/MS analysis 7. However this type of analysis applied to native tissues seldom allows identification of more than 3,000 thousand proteins. To increase of the depth of the analysis the peptides generated in MED FASP have to be pre-fractionated before LC-MS/MS. The SAX based micro-column separation is a simple and efficient fractionation method 10. It has already been applied in several proteomic studies including those analyzing fixed tissue 5, 8, 9. The SAX-'pipette-tip' microcolumns, and the C18-'StageTip' desalting columns 9 are easy to prepare. The columns are assembled by stacking of plugs, cut from the SAX or C18 membranes, in a 200 &mu;l pipette tip 11. Examples of the analysis of the SAX-fractionated FFPE samples are shown in Table 1.
<img alt="Figure 1" src="/files/ftp_upload/50589/50589fig1.jpg" /> 
Figure 1. Procedure overview. The procedure consist of four distinct parts: (1) preparation of sections of the FFPE samples and its microdissection, (2) lysis of the sample and processing of the proteins using MED FASP approach, and (3) quantitation and (4) fractionation of the peptides.
<table border="1" class="jove_content_small" fo:keep-together.within-page="always">
	<tbody>
		<tr>
			<td fo:width="1.4in">Sample</td>
			<td fo:width="1in">Sample pre-fractionation /digestion</td>
			<td fo:width="1in">Mass spectrometer used</td>
			<td fo:width="1.25in">Peptide yield ng / nL sample (&plusmn;SD)</td>
			<td fo:width="1.25in">Unique Protein Identifications Per single sample</td>
			<td fo:width=".75in">Reference</td>
		</tr>
		<tr>
			<td>
			&#8226;Adenonocarcinoma 
			&#8226;Normal colonic mucosa
			</td>
			<td>SAX/one enzyme</td>
			<td>Orbitrap -Velos</td>
			<td>36&plusmn;11 (n = 8) 
			30&plusmn;8 (n = 8)</td>
			<td>5,985&plusmn;54 
			5,868&plusmn;110</td>
			<td>8</td>
		</tr>
		<tr>
			<td>&#8226;Colonic Adenoma</td>
			<td>SAX/two enzymes</td>
			<td>Q Exactive</td>
			<td>56&plusmn;6.1 (n = 3)</td>
			<td>9,501&plusmn;28</td>
			<td>3</td>
		</tr>
	</tbody>
</table>
Table 1. Representative results of proteomic analyses of the FFPE microdissected tissue.

Watch this Scientific Journal Video about Proteomic Sample Preparation from Formalin Fixed and Paraffin Embedded Tissue at JoVE.com

Proteomic Sample Preparation from Formalin Fixed and Paraffin Embedded Tissue

Archival formalin fixed and paraffin embedded (FFPE) clinical samples are valuable material for investigation of diseases. Here we demonstrate a sample preparation workflow allowing in-depth proteomic analysis of microdissected FFPE tissue.

Preserved clinical material is a unique source for proteomic investigation of human disorders. Here we describe an optimized protocol allowing large scale ...

proteomic-sample-preparation-from-formalin-fixed-paraffin-embedded

Research

JoVE Journal

Biology

27.5K Aufrufe.  Max Planck Institute of Biochemistry.  Archiv Formalin fixiert und in Paraffin eingebetteten (FFPE) klinische Proben sind wertvolles Material für die Untersuchung von Krankheiten. Hier zeigen wir eine Probenvorbereitung Workflow ermöglicht eingehende Proteomanalyse mikrodissezierten FFPE Gewebe. 

Serie: Proteomic Sample Preparation from Formalin Fixed and Paraffin Embedded Tissue

Immunohistochemistry: Paraffin Sections Using the Vectastain ABC Kit from Vector Labs

Immunohistochemistry (IHC) is a valuable technique utilized to localize/visualize protein expression in a mounted tissue section using specific antibodies. There are two methods: the direct and indirect method. In this experiment, we will only describe the use of indirect IHC staining. Indirect IHC staining utilizes highly specific primary and biotin-conjugated secondary antibodies. Primary antibodies are utilized to discretely identify proteins of interest by binding to a specific epitope, while secondary antibodies subtract for non-specific background staining and amplify signal by forming complexes to the primary antibody. Slides can either be generated from frozen sections, or paraffin embedded sections mounted on glass slides. In this protocol, we discuss the preparation of paraffin-embedded sections by dewaxing, hydration using an alcohol gradient, heat induced antigen retrieval, and blocking of endogenous peroxidase activity and non-specific binding sites. Some sections are then stained with antibodies specific for T cell marker CD8 and while others are stained for tyrosine hydroxylase. The slides are subsequently treated with appropriate secondary antibodies conjugated to biotin, then developed utilizing avidin-conjugated horseradish peroxidase (HRP) with Diaminiobenzidine (DAB) as substrate. Following development, the slides are counterstained for contrast, and mounted under coverslips with permount. After adequate drying, these slides are then ready for imaging.

Immunohistochemistry (IHC) is a valuable technique utilized to localize/visualize protein expression in a mounted tissue section using specific ...

Electrophoretic Separation of Proteins

Electrophoresis is used to separate complex mixtures of proteins (e.g., from cells, subcellular fractions, column fractions, or immunoprecipitates), to investigate subunit compositions, and to verify homogeneity of protein samples. It can also serve to purify proteins for use in further applications. In polyacrylamide gel electrophoresis, proteins migrate in response to an electrical field through pores in a polyacrylamide gel matrix; pore size decreases with increasing acrylamide concentration. The combination of pore size and protein charge, size, and shape determines the migration rate of the protein. In this unit, the standard Laemmli method is described for discontinuous gel electrophoresis under denaturing conditions, i.e., in the presence of sodium dodecyl sulfate (SDS). 

In this video, we demonstrate a method for electrophoretic separation of proteins using poly-acrylimide gel electrophoresis (PAGE).

Electrophoresis is used to separate complex mixtures of proteins (e.g., from cells, subcellular fractions, column fractions, or immunoprecipitates), to ...

Toxin Induction and Protein Extraction from Fusarium spp. Cultures for Proteomic Studies

Fusaria are filamentous fungi able to produce different toxins. Fusarium mycotoxins such as deoxynivalenol, nivalenol, T2, zearelenone, fusaric acid, moniliformin, etc... have adverse effects on both human and animal health and some are considered as pathogenicity factors. Proteomic studies showed to be effective for deciphering toxin production mechanisms (Taylor et al., 2008) as well as for identifying potential pathogenic factors (Paper et al., 2007, Houterman et al., 2007) in Fusaria. It becomes therefore fundamental to establish reliable methods for comparing between proteomic studies in order to rely on true differences found in protein expression among experiments, strains and laboratories. The procedure that will be described should contribute to an increased level of standardization of proteomic procedures by two ways. The filmed protocol is used to increase the level of details that can be described precisely. Moreover, the availability of standardized procedures to process biological replicates should guarantee a higher robustness of data, taking into account also the human factor within the technical reproducibility of the extraction procedure.
The protocol described requires 16 days for its completion: fourteen days for cultures and two days for protein extraction (figure 1). 
Briefly, Fusarium strains are grown on solid media for 4 days; they are then manually fragmented and transferred into a modified toxin inducing media (Jiao et al., 2008) for 10 days. Mycelium is collected by filtration through a Miracloth layer. Grinding is performed in a cold chamber. Different operators performed extraction replicates (n=3) in order to take into account the bias due to technical variations (figure 2). Extraction was based on a SDS/DTT buffer as described in Taylor et al. (2008) with slight modifications. Total protein extraction required a precipitation process of the proteins using Aceton/TCA/DTT buffer overnight and Acetone /DTT washing (figure 3a,3b). Proteins were finally resolubilized in the protein-labelling buffer and quantified. Results of the extraction were visualized on a 1D gel (Figure 4, SDS-PAGE), before proceeding to 2D gels (IEF/SDS-PAGE). The same procedure can be applied for proteomic analyses on other growing media and other filamentous fungi (Miles et al., 2007).

Toxin Induction and Protein Extraction from Fusarium spp. Cultures for Proteomic Studies

Protein extraction for proteomic analyses in fungal species requires high levels of standardization to be accomplished according with the minimum information about a proteomic experiment (MIAPE) guidelines. We present a video-protocol that includes a procedure for minimizing experimental bias during toxin induction and protein extraction from Fusarium spp.

Fusaria are filamentous fungi able to produce different toxins. Fusarium mycotoxins such as deoxynivalenol, nivalenol, T2, zearelenone, fusaric acid, ...

Western Blotting: Sample Preparation to Detection

Western blotting is an analytical technique used to detect specific proteins in a given sample of tissue homogenate or extract. It uses gel electrophoresis to separate native or denatured proteins by the length of the polypeptide (denaturing conditions) or by the 3-D structure of the protein (native/ non-denaturing conditions). The proteins are then transferred to a membrane (typically nitrocellulose or PVDF), where they are probed (detected) using antibodies specific to the target protein.

Western blotting is an analytical technique used to detect specific proteins in a given sample of tissue homogenate or extract.

Western blotting is an analytical technique used to detect specific proteins in a given sample of tissue homogenate or extract. It uses gel ...

Paraffin-Embedded and Frozen Sections of Drosophila Adult Muscles

The molecular characterization of muscular dystrophies and myopathies in humans has revealed the complexity of muscle disease and genetic analysis of muscle specification, formation and function in model systems has provided valuable insight into muscle physiology. Therefore, identifying and characterizing molecular mechanisms that underlie muscle damage is critical. The structure of adult Drosophila multi-fiber muscles resemble vertebrate striated muscles 1 and the genetic tractability of Drosophila has made it a great system to analyze dystrophic muscle morphology and characterize the processes affecting muscular function in ageing adult flies 2. Here we present the histological technique for preparing paraffin-embedded and frozen sections of Drosophila thoracic muscles. These preparations allow for the tissue to be stained with classical histological stains and labeled with protein detecting dyes, and specifically cryosections are ideal for immunohistochemical detection of proteins in intact muscles. This allows for analysis of muscle tissue structure, identification of morphological defects, and detection of the expression pattern for muscle/neuron-specific proteins in Drosophila adult muscles. These techniques can also be slightly modified for sectioning of other body parts.

Paraffin-Embedded and Frozen Sections of Drosophila Adult Muscles

Identification of mechanisms underlying muscle damage is crucial. Here we present the histological technique for preparing paraffin-embedded and frozen sections of Drosophila thoracic muscles. This allows analysis of muscle morphology and localization of protein and other muscle cell components.

The molecular characterization of muscular dystrophies and myopathies in humans has revealed the complexity of muscle disease and genetic analysis of ...

DNA Extraction from Paraffin Embedded Material for Genetic and Epigenetic Analyses

Disease development and progression are characterized by frequent genetic and epigenetic aberrations including chromosomal rearrangements, copy number gains and losses and DNA methylation. Advances in high-throughput, genome-wide profiling technologies, such as microarrays, have significantly improved our ability to identify and detect these specific alterations. However as technology continues to improve, a limiting factor remains sample quality and availability. Furthermore, follow-up clinical information and disease outcome are often collected years after the initial specimen collection. Specimens, typically formalin-fixed and paraffin embedded (FFPE), are stored in hospital archives for years to decades. DNA can be efficiently and effectively recovered from paraffin-embedded specimens if the appropriate method of extraction is applied. High quality DNA extracted from properly preserved and stored specimens can support quantitative assays for comparisons of normal and diseased tissues and generation of genetic and epigenetic signatures 1. To extract DNA from paraffin-embedded samples, tissue cores or microdissected tissue are subjected to xylene treatment, which dissolves the paraffin from the tissue, and then rehydrated using a series of ethanol washes. Proteins and harmful enzymes such as nucleases are subsequently digested by proteinase K. The addition of lysis buffer, which contains denaturing agents such as sodium dodecyl sulfate (SDS), facilitates digestion 2. Nucleic acids are purified from the tissue lysate using buffer-saturated phenol and high speed centrifugation which generates a biphasic solution. DNA and RNA remain in the upper aqueous phase, while proteins, lipids and polysaccharides are sequestered in the inter- and organic-phases respectively. Retention of the aqueous phase and repeated phenol extractions generates a clean sample. Following phenol extractions, RNase A is added to eliminate contaminating RNA. Additional phenol extractions following incubation with RNase A are used to remove any remaining enzyme. The addition of sodium acetate and isopropanol precipitates DNA, and high speed centrifugation is used to pellet the DNA and facilitate isopropanol removal. Excess salts carried over from precipitation can interfere with subsequent enzymatic assays, but can be removed from the DNA by washing with 70% ethanol, followed by centrifugation to re-pellet the DNA 3. DNA is re-suspended in distilled water or the buffer of choice, quantified and stored at -20&deg;C. Purified DNA can subsequently be used in downstream applications which include, but are not limited to, PCR, array comparative genomic hybridization 4 (array CGH), methylated DNA Immunoprecipitation (MeDIP) and sequencing, allowing for an integrative analysis of tissue/tumor samples.

This video demonstrates the protocol for DNA extraction from formalin-fixed paraffin-embedded material. This is a multi-day procedure in which tissue sections are deparaffinized with xylene, rehydrated with ethanol and treated with proteinase K to purify and isolate DNA for subsequent gene-specific or genome-wide analysis.

Disease development and progression are characterized by frequent genetic and epigenetic aberrations including chromosomal rearrangements, copy number ...

MicroRNA In situ Hybridization for Formalin Fixed Kidney Tissues

In this article we describe a method for colorimetric detection of miRNA in the kidney through in situ hybridization with digoxigenin tagged microRNA probes. This protocol, originally developed by Kloosterman and colleagues for broad use with Exiqon miRNA probes1, has been modified to overcome challenges inherent in miRNA analysis in kidney tissues. These include issues such as structure identification and hard to remove residual probe and antibody. Use of relatively thin, 5 mm thick, tissue sections allowed for clear visualization of kidney structures, while a strong probe signal was retained in cells. Additionally, probe concentration and incubation conditions were optimized to facilitate visualization of microRNA expression with low background and nonspecific signal. Here, the optimized protocol is described, covering the initial tissue collection and preparation through the mounting of slides at the end of the procedure. The basic components of this protocol can be altered for application to other tissues and cell culture models.

MicroRNA In situ Hybridization for Formalin Fixed Kidney Tissues

This article describes an in situ hybridization protocol optimized for colormetric detection of microRNA expression in formalin fixed kidney sections.

In this article we describe a method for colorimetric detection of miRNA in the kidney through in situ hybridization with digoxigenin tagged microRNA ...

qPCR Is a Sensitive and Rapid Method for Detection of Cytomegaloviral DNA in Formalin-fixed, Paraffin-embedded Biopsy Tissue

It is crucial to identify cytomegalovirus (CMV) infection in the gastrointestinal (GI) tract of immunosuppressed patients, given their greater risk for developing severe infection. Many laboratory methods for the detection of CMV infection have been developed, including serology, viral culture, and molecular methods. Often, these methods reflect systemic involvement with CMV and do not specifically identify local tissue involvement. Therefore, detection of CMV infection in the GI tract is frequently done by traditional histology of biopsy tissue. Hematoxylin and eosin (H&#38;E) staining in conjunction with immunohistochemistry (IHC) have remained the mainstays of examining these biopsies. H&#38;E and IHC sometimes result in atypical (equivocal) staining patterns, making interpretation difficult. It was shown that quantitative polymerase chain reaction (qPCR) for CMV can successfully be performed on formalin-fixed, paraffin-embedded (FFPE) biopsy tissue for very high sensitivity and specificity. The goal of this protocol is to demonstrate how to perform qPCR testing for the detection of CMV in FFPE biopsy tissue in a clinical laboratory setting. This method is likely to be of great benefit for patients in cases of equivocal staining for CMV in GI biopsies.

This protocol describes qPCR detection of cytomegalovirus in formalin-fixed, paraffin-embedded biopsy tissue, which is rapid, sensitive, specific, and useful for interpreting equivocal hematoxylin and eosin or immunohistochemical staining patterns.

It is crucial to identify cytomegalovirus (CMV) infection in the gastrointestinal (GI) tract of immunosuppressed patients, given their greater risk for ...

Employing Digital Droplet PCR to Detect BRAF V600E Mutations in Formalin-fixed Paraffin-embedded Reference Standard Cell Lines

ddPCR is a highly sensitive PCR method that utilizes a water-oil emulsion system. Using a droplet generator, an extracted nucleic acid sample is partitioned into ~20,000 nano-sized, water-in-oil droplets, and PCR amplification occurs in individual droplets. The ddPCR approach is in identifying sequence mutations, copy number alterations, and select structural rearrangements involving targeted genes. Here, we demonstrate the use of ddPCR as a powerful technique for precisely quantitating rare BRAF V600E mutations in FFPE reference standard cell lines, which is helpful in identifying individuals with cancer. In conclusion, ddPCR technique offers the potential to precisely profile the specific rare mutations in different genes in various types of FFPE samples.

The goal of this video is to demonstrate how to perform&#160;automated DNA extraction from formalin-fixed paraffin-embedded (FFPE) reference standard cell lines and digital droplet PCR&#160;(ddPCR) analysis to detect rare mutations in a clinical setting. Detecting mutations in FFPE samples demonstrates the clinical utility of ddPCR in FFPE samples.

ddPCR is a highly sensitive PCR method that utilizes a water-oil emulsion system. Using a droplet generator, an extracted nucleic acid sample is ...

Preparation of Formalin-fixed Paraffin-embedded Tissue Cores for both RNA and DNA Extraction

Formalin-fixed paraffin embedded tissue (FFPET) represents a valuable, well-annotated substrate for molecular investigations. The utility of FFPET in molecular analysis is complicated both by heterogeneous tissue composition and low yields when extracting nucleic acids. A literature search revealed a paucity of protocols addressing these issues, and none that showed a validated method for simultaneous extraction of RNA and DNA from regions of interest in FFPET. This method addresses both issues. Tissue specificity was achieved by mapping cancer areas of interest on microscope slides and transferring annotations onto FFPET blocks. Tissue cores were harvested from areas of interest using 0.6 mm microarray punches. Nucleic acid extraction was performed using a commercial FFPET extraction system, with modifications to homogenization, deparaffinization, and Proteinase K digestion steps to improve tissue digestion and increase nucleic acid yields. The modified protocol yields sufficient quantity and quality of nucleic acids for use in a number of downstream analyses, including a multi-analyte gene expression platform, as well as reverse transcriptase coupled real time PCR analysis of mRNA expression, and methylation-specific PCR (MSP) analysis of DNA methylation.

This modified extraction protocol improves RNA and DNA yields from more precisely targeted regions of interest in histopathologic tissue blocks.

Formalin-fixed paraffin embedded tissue (FFPET) represents a valuable, well-annotated substrate for molecular investigations. The utility of FFPET in ...