The work was supported by The Swedish Foundation for Strategic Environmental Research (MISTRA) through the DOM program and Grant 211684 (BACSIN) from the European Union Community FP7 Framework program. We thank J. Engstrand for assistance in filming the X-ray analysis and L. Tang for helping with the conceptual narrative.

1. Cultivation and harvest of P. putida
<ol>
	<li>Prepare a starter culture of Pseudomonas putida by inoculating 100 ml of tryptic soy broth (TSB) with a colony of P. putida cells cultured on agar supplemented with tryptic soy broth (TSA). Keep the culture at 30 &deg;C on a shaking board set at 130 rpm.</li>
	<li>After 7 hr transfer an aliquot from the starter culture equivalent to 1/10 of the final volume of the main culture to fresh TSB-medium. Keep the cells at 30 &deg;C on a shaking board at 130 rpm for 16 hr.</li>
	<li>After 16 hr of growth the cells are harvested by spinning the cell culture at 1,500 x g for 20 min at RT. Decant the supernatant and wash the cells by re-suspending the cell pellet is in a NaCl-solution that is isotonic to the growth medium. In this case a 150 mM NaCl solution was used. The cells are then centrifuged once more and the supernatant is decanted before resuspending the cells in the formulation medium, see step 3.2.</li>
</ol>
2. Cultivation of other species
<ol>
	<li>To adapt the protocol to other bacterial species the cultivation and harvest procedures should be changed according to the requirements of that species. To avoid osmotic shock when handling the cells during harvest and the washing step(s), the osmolality of the solutions needs to match that of the growth medium at harvest.</li>
</ol>
3. Formulation of cells
<ol>
	<li>Prepare the formulation solutions by weighing out the respective matrix components and dissolve them in water. To achieve isotonic conditions, either adjust the amount of excipient or add NaCl or some other cell compatible solute to reach the desired osmolality. For substances with low molecular weight such as disaccharides the amounts can easily be adjusted to reach isotonic conditions. For substances like polymers that are of high molecular weight, the tonicity has to be adjusted with cell compatible solutes, e.g. NaCl or disaccharides. Note that any addition of a substance will influence the physical properties of the formulation, which in turn may influence freeze-drying behavior and cell survival.</li>
	<li>Decant the washing solution (in this case NaCl) and re-suspend the cells in the respective formulation media.</li>
	<li>Make sure that the cells are homogeneously dispersed. Formulations of low viscosity are vortexed whereas formulations of higher viscosities are mixed using by adding, e.g., a stir bar and shaking the container until homogeneous mixing is achieved.</li>
	<li>Divide the formulations into freeze-dryer vials. The vials should be weighed empty, with sample before and after freeze-drying to calculate the amount of water removed during freeze-drying.</li>
	<li>Add rubber stoppers to the vials if the vials are to be sealed inside the freeze-dryer, see step 4.3.</li>
	<li>Enumerate the cells in each formulation before freeze-drying, see step 6.</li>
</ol>
4. Freeze-drying
<ol>
	<li>The freeze-drying conditions have to be adjusted to the physical properties of the formulation. The most important parameter is in this case the glass transition temperature, Tg, of the formulation, denoted Tg' for the freeze-concentrated sample to indicate that water is still present. The Tg' of the freeze-concentrated formulation is easily measured using differential scanning calorimetry (DSC), see step 7.</li>
	<li>Adjust the parameters of the freeze-drying process so that the temperature of the sample is always below the Tg of the sample and that the chamber pressure allows for a fast sublimation of ice, i.e. primary drying, and residual water in the formulation, i.e. secondary drying. If the sample temperature is above Tg' during the drying process there is a great risk of structural collapse of the sample which may significantly decrease the cellular survival.</li>
	<li>To protect the dry products after freeze-drying the sample atmosphere has to be controlled. If possible, seal the samples in the freeze-dryer before the vacuum is released at the end of the freeze-drying cycle. Alternatively the vials can be filled with a preferred atmosphere. It is important to avoid exposing the samples to the ambient conditions as any moisture or oxygen present in the storage atmosphere will influence the survival of the cells.</li>
	<li>Weigh the vials.</li>
</ol>
5. Rehydration
<ol>
	<li>Rehydrate the samples with deionized and sterile water. The amount of water to be added should be that same as the amount removed during freeze-drying and is calculated from the weight of the empty vial, the same vial with sample before and after freeze-drying. Vortex the samples now and again then until the solutions appear homogenous.</li>
</ol>
6. Enumeration
<ol>
	<li>Draw 100 &mu;l from each sample and make 10-fold serial dilutions. From the dilutions of interest 100 &mu;l is plated on TSA-plates. The plates are incubated at the temperature and time required.</li>
</ol>
7. Characterization of Formulation of Freezing Behavior
<ol>
	<li>Take a small amount, 5 - 10 mg, of the sample and enclose it in a DSC-aluminium pan with lid. Prepare an empty pan as a reference.</li>
	<li>Set the DSC temperature scan program. The cooling program is set to mimic the freezing step in the freeze-drying program. This is done as the cooling kinetics can influence the Tg' of the hydrated formulations. Before the heating scan begins bring down the temperature to well below the expected Tg' of the investigated formulations, normally -100 &deg;C.</li>
	<li>Choose an appropriate heating rate, normally a heating rate of 5 - 40 &deg;C/min is used. The recorded heat flow signal is expressed in watts and will be influenced by the heating rate. A higher heating rate will give a larger signal of Tg'.</li>
	<li>Set the temperature range so that it covers both Tg' and the melting of the formulation.</li>
</ol>
8. Surface Tension Measurements of the Hydrated Formulations
<ol>
	<li>The experimental setup used in this experiment is according to the du No&uuml;y method to measure surface.</li>
	<li>Clean the platinum ring and the measuring vessel carefully. The vessel is rinsed with acetone, wiped with a lint-free tissue, and then burned on the inside with a colorless flame. The ring glows red in a colorless flame.</li>
	<li>Fill the vessel with the solution and let the surface settle before measuring. For solutions where the equilibrium state is reached only after a long time, e.g. polymers, the simple setup used here will provide qualitative data.</li>
	<li>For formulations with high viscosities, e.g. solutions of 2% (w/w) HEC or HPMC, the surface tension has to be measured on solutions of lower concentrations and then extrapolated. This can be done by taking advantage of the fact that the drop in surface tension levels off at concentrations below 0.5% (w/w).</li>
</ol>
9. X-ray Analysis of the Dry Formulations
<ol>
	<li>Take a small amount of matrix/bacteria and load it onto a sample holder.</li>
	<li>Mount the sample holder into the X-ray-diffractometer.</li>
	<li>To analyze any crystalline phase present in the sample the EVA program package from Bruker can be used.</li>
</ol>
10. Electron Microscopy
<ol>
	<li>Take a small amount of matrix/bacteria out of the vials and fix it on a SEM stub.</li>
	<li>Load the SEM holder in the sputter-coater (Thermo VGScientific Polaron SC7640 used in the present work) and coat the sample with a few nm of Au/Pd or Pt. In these experiments the sputtering parameters were: 1,900 V, 20 mA, and 20 sec, for a ~ 5 - 10 nm Au/Pd coating. The coating reduces electric charging during image acquisition. It is recommended to start with a thin coating and, if charging persists and causes image artifacts, the sample should be coated again.</li>
	<li>Load the SEM holder in the SEM chamber. Select appropriate imaging parameters. For the instrument used in Figure 2 (FEI Strata DB235) we used 5 kV accelerating voltage, spotsize 3, a working distance of 5 mm and the secondary electron detector.</li>
	<li>Optionally, it is possible to use the Focused Ion Beam to cut cross-sections of the bacteria embedded in the polymer to reveal further details.</li>
</ol>

<ol>
	<li>Wessman, P., Mahlin, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Impact+of+matrix+properties+on+the+survival+of+freeze-dried+bacteria.">Impact of matrix properties on the survival of freeze-dried bacteria.</a> J. Sci. Food Agric. 91 (14), 2518-2528 (2011).</li><li>Ablett, S., Izzard, M. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Differential+Scanning+Calorimetric+Study+of+Frozen+Sucrose+and+Glycerol+Solutions.">Differential Scanning Calorimetric Study of Frozen Sucrose and Glycerol Solutions.</a> Journal of the Chemical Society-Faraday Transactions. 88 (6), 789-794 (1992).</li><li>Knopp, S. A., Chongprasert, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+relationship+between+type+TMDSC+curve+of+frozen+sucrose+solutions+and+collapse+during+freeze-drying.">The relationship between type TMDSC curve of frozen sucrose solutions and collapse during freeze-drying.</a> Journal of Thermal Analysis and Calorimetry. 54 (2), 659-672 (1998).</li><li>Crowe, J. H., Leslie, S. B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Is+Vitrification+Sufficient+to+Preserve+Liposomes+during+Freeze-Drying.">Is Vitrification Sufficient to Preserve Liposomes during Freeze-Drying.</a> Cryobiology. 31 (4), 355-366 (1994).</li><li>Jain, P., Sen, S., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+glass-forming+biopreservatives+on+head+group+rotational+dynamics+in+freeze-dried+phospholipid+bilayers:+A+P-31+NMR+study.">Effect of glass-forming biopreservatives on head group rotational dynamics in freeze-dried phospholipid bilayers: A P-31 NMR study.</a> Journal of Chemical Physics. 131 (2), (2009).</li><li>Stock, J. B., Rauch, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Periplasmic+Space+in+Salmonella-Typhimurium+and+Escherichia-Coli.">Periplasmic Space in Salmonella-Typhimurium and Escherichia-Coli.</a> Journal of Biological Chemistry. 252 (21), 7850-7861 (1977).</li><li>Crowe, J. H., Hoekstra, F. A., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Anhydrobiosis.">Anhydrobiosis.</a> Annual Review of Physiology. 54, 579-599 (1992).</li><li>Leslie, S. B., Israeli, E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Trehalose+and+Sucrose+Protect+Both+Membranes+and+Proteins+in+Intact+Bacteria+during+Drying.">Trehalose and Sucrose Protect Both Membranes and Proteins in Intact Bacteria during Drying.</a> Applied and Environmental Microbiology. 61 (10), 3592-3597 (1995).</li><li>Nesarikar, V. V., Nassar, M. N. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Effect+of+cations+and+anions+on+glass+transition+temperatures+in+excipient+solutions.">Effect of cations and anions on glass transition temperatures in excipient solutions.</a> Pharmaceutical Development and Technology. 12 (3), 259-264 (2007).</li><li>You, Y., Ludescher, R. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+effect+of+sodium+chloride+on+molecular+mobility+in+amorphous+sucrose+detected+by+phosphorescence+from+the+triplet+probe+erythrosin+B.">The effect of sodium chloride on molecular mobility in amorphous sucrose detected by phosphorescence from the triplet probe erythrosin B.</a> Carbohydr. Res. 343 (2), 350-363 (2008).</li><li>Crowe, J. H., Hoekstra, F. A., Nguyen, K. H. N., Crowe, L. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Is+vitrification+involved+in+depression+of+the+phase+transition+temperature+in+dry+phospholipids.">Is vitrification involved in depression of the phase transition temperature in dry phospholipids.</a> Biochim. Biophys. Acta Biomembr. 1280, 187-196 (1996).</li></ol>

No conflicts of interest declared.

The motive for this study was to investigate some formulation properties that may be of importance for cell survival during freeze-drying. Although the intrinsic drying tolerance varies between different species, as illustrated in Figure 1A, the trend on how well the different formulations support cell survival is similar. It is informative to start with a comparison of sucrose and Ficoll. It is believed that a key factor for a formulation to support cell survival is the capability of the formulation ing...

<table border="1">
	<tbody>
		<tr>
			<td>Name of the reagent</td>
			<td>Company</td>
			<td>Catalogue number</td>
			<td>Comments (optional)</td>
		</tr>
		<tr>
			<td>Ficoll PM 400</td>
			<td>GE-healthcare</td>
			<td>17-0300-10</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>HEC (Natrosol-M Pharm Grade)</td>
			<td>Ashland</td>
			<td>&nbsp;</td>
			<td>Gift from Ashland</td>
		</tr>
		<tr>
			<td>HPMC (Methocel F4M)</td>
			<td>Dow</td>
			<td>&nbsp;</td>
			<td>Gift from the Department of Pharmacy, Uppsala University</td>
		</tr>
		<tr>
			<td>Sucrose</td>
			<td>Sigma-Aldrich</td>
			<td>S2395</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>NaCl</td>
			<td>Sigma-Aldrich</td>
			<td>71376</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Tryptic Soy broth</td>
			<td>Merck</td>
			<td>105459</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Tryptic Soy Agar</td>
			<td>Merck</td>
			<td>105458</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Lyostar II</td>
			<td>FTS Kinetics</td>
			<td>N.A.</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Pyris Diamond DSC</td>
			<td>Perkin-Elmer</td>
			<td>N.A.</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Bruker AXS SMART CCD 1k Diffractometer</td>
			<td>Bruker</td>
			<td>N.A</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Dual-beam FEI Strata DB235 FIB/SEM</td>
			<td>FEI</td>
			<td>N.A</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Kr&uuml;ss Educational Tensiometer</td>
			<td>Kr&uuml;ss</td>
			<td>N.A.</td>
			<td>&nbsp;</td>
		</tr>
	</tbody>
</table>

formulations for freeze-drying of bacteria and their influence on cell survival

Cellular water can be removed to reversibly inactivate microorganisms to facilitate storage. One such method of removal is freeze-drying, which is considered a gentle dehydration method. To facilitate cell survival during drying, the cells are often formulated beforehand. The formulation forms a matrix that embeds the cells and protects them from various harmful stresses imposed on the cells during freezing and drying. We present here a general method to evaluate the survival rate of cells after freeze-drying and we illustrate it by comparing the results obtained with four different formulations: the disaccharide sucrose, the sucrose derived polymer Ficoll PM400, and the respective polysaccharides hydroxyethyl cellulose (HEC) and hydroxypropyl methyl cellulose (HPMC), on two strains of bacteria, P. putida KT2440 and A. chlorophenolicus A6. In this work we illustrate how to prepare formulations for freeze-drying and how to investigate the mechanisms of cell survival after rehydration by characterizing the formulation using of differential scanning calorimetry (DSC), surface tension measurements, X-ray analysis, and electron microscopy and relating those data to survival rates. The polymers were chosen to get a monomeric structure of the respective polysaccharide resembling sucrose to a varying degrees. Using this method setup we showed that polymers can support cell survival as effectively as disaccharides if certain physical properties of the formulation are controlled1.

Table 1 displays data on formulation composition, thermal events recorded by DSC during heating of the frozen formulations, structure of the dry samples and the surface tension of the formulation solutions. The Tg' of sucrose has been determined to -40 &deg;C 2, 3and can be difficult to detect for sucrose concentrations below 20% w/w. The thermal event at -35 &deg;C is probably related to the onset of ice dissolution2. The crystalline structure detected by X-ray ...

Watch this Scientific Journal Video about Formulations for Freeze-drying of Bacteria and Their Influence on Cell Survival at JoVE.com

Formulations for Freeze-drying of Bacteria and Their Influence on Cell Survival

Freeze-drying is often an easy and convenient way to obtain dry products of viable bacterial cells. An issue of the process is cell survival. We detail here a procedure to investigate how cell survival during freeze-drying is influenced by the properties of the formulation used.

Cellular water can be removed to reversibly inactivate microorganisms to facilitate storage. One such method of removal is freeze-drying, which is ...

formulations-for-freeze-drying-bacteria-their-influence-on-cell

Research

JoVE Journal

Biology

23.2K vistas.  Swedish University of Agricultural Sciences. La liofilización es a menudo una manera fácil y conveniente de obtener productos secos de células bacterianas viables. Un problema del proceso es la supervivencia celular. Nos detalle aquí un procedimiento para investigar cómo la supervivencia celular durante la liofilización está influenciada por las propiedades de la formulación utilizada.

Video: Formulations for Freeze-drying of Bacteria and Their Influence on Cell Survival

Obtaining Hemocytes from the Hawaiian Bobtail Squid Euprymna scolopes and Observing their Adherence to Symbiotic and Non-Symbiotic Bacteria

Studies concerning the role of the immune system in mediating molecular signaling between beneficial bacteria and their hosts have, in recent years, made significant contributions to our understanding of the co-evolution of eukaryotes with their microbiota. The symbiotic association between the Hawaiian bobtail squid, Euprymna scolopes and the bioluminescent bacterium Vibrio fischeri has been utilized as a model system for understanding the effects of beneficial bacteria on animal development. Recent studies have shown that macrophage-like hemocytes, the sole cellular component of the squid host's innate immune system, likely play an important role in mediating the establishment and maintenance of this association. This protocol will demonstrate how to obtain hemocytes from E. scolopes and then use these cells in bacterial binding assays. Adult squid are first anesthetized before hemolymph is collected by syringe from the main cephalic blood vessel. The host hemocytes, contained in the extracted hemolymph, are adhered to chambered glass coverslips and then exposed to green fluorescent protein-labeled symbiotic Vibrio fischeri and non-symbiotic Vibrio harveyi. The hemocytes are counterstained with a fluorescent dye (Cell Tracker Orange, Invitrogen) and then visualized using fluorescent microscopy.

Obtaining Hemocytes from the Hawaiian Bobtail Squid Euprymna scolopes and Observing their Adherence to Symbiotic and Non-Symbiotic Bacteria

This video will demonstrate how to obtain hemocytes (blood cells) from the Hawaiian bobtail squid, Euprymna scolopes for use in cell biological and bacterial adhesion assays. Hemocytes will be stained with a fluorescent dye and exposed to GFP-labeled bacteria.

Studies concerning the role of the immune system in mediating molecular signaling between beneficial bacteria and their hosts have, in recent years, made ...

Detection of Post-translational Modifications on Native Intact Nucleosomes by ELISA

The genome of eukaryotes exists as chromatin which contains both DNA and proteins. The fundamental unit of chromatin is the nucleosome, which contains 146 base pairs of DNA associated with two each of histones H2A, H2B, H3, and H41. The N-terminal tails of histones are rich in lysine and arginine and are modified post-transcriptionally by acetylation, methylation, and other post-translational modifications (PTMs). The PTM configuration of nucleosomes can affect the transcriptional activity of associated DNA, thus providing a mode of gene regulation that is epigenetic in nature 2,3. We developed a method called nucleosome ELISA (NU-ELISA) to quantitatively determine global PTM signatures of nucleosomes extracted from cells. NU-ELISA is more sensitive and quantitative than western blotting, and is useful to interrogate the epiproteomic state of specific cell types. This video journal article shows detailed procedures to perform NU-ELISA analysis.

Nucleosome ELISA (NU-ELISA) is a sensitive and quantitative method to detect global patterns of post-translational modifications in preparations of native, intact nucleosomes. These modifications include methylations, acetylations, and phosphorylations at specific histone amino acid residues, and hence NU-ELISA provides a global proteomic assay of the overall chromatin modification states of specific cell types.

The genome of eukaryotes exists as chromatin which contains both DNA and proteins. The fundamental unit of chromatin is the nucleosome, which contains 146 ...

Analyzing the Function of Small GTPases by Microinjection of Plasmids into Polarized Epithelial Cells

Epithelial cells polarize their plasma membrane into biochemically and functionally distinct apical and basolateral domains where the apical domain faces the 'free' surfaces and the basolateral membrane is in contact with the substrate and neighboring cells. Both membrane domains are separated by tight junctions, which form a diffusion barrier. Apical-basolateral polarization can be recapitulated successfully in culture when epithelial cells such as Madin-Darby Canine Kidney (MDCK) cells are seeded at high density on polycarbonate filters and cultured for several days 1 2. Establishment and maintenance of cell polarity is regulated by an array of small GTPases of the Ras superfamily such as RalA, Cdc42, Rab8, Rab10 and Rab13 3 4 5 6 7. Like all GTPases these proteins cycle between an inactive GDP-bound state and an active GTP-bound state. Specific mutations in the nucleotide binding regions interfere with this cycling 8. For example, Rab13T22N is permanently locked in the GDP-form and thus dubbed 'dominant negative', whereas Rab13Q67L can no longer hydrolyze GTP and is thus locked in a 'dominant active' state 7. To analyze their function in cells both dominant negative and dominant active alleles of GTPases are typically expressed at high levels to interfere with the function of the endogenous proteins 9. An elegant way to achieve high levels of overexpression in a short amount of time is to introduce the plasmids encoding the relevant proteins directly into the nuclei of polarized cells grown on filter supports using microinjection technique. This is often combined with the co-injection of reporter plasmids that encode plasma membrane receptors that are specifically sorted to the apical or basolateral domain. A cargo frequently used to analyze cargo sorting to the basolateral domain is a temperature sensitive allele of the vesicular stomatitis virus glycoprotein (VSVGts045) 10. This protein cannot fold properly at 39&deg;C and will thus be retained in the endoplasmic reticulum (ER) while the regulatory protein of interest is assembled in the cytosol. A shift to 31&deg;C will then allow VSVGts045 to fold properly, leave the ER and travel to the plasma membrane 11. This chase is typically performed in the presence of cycloheximide to prevent further protein synthesis leading to cleaner results. Here we describe in detail the procedure of microinjecting plasmids into polarized cells and subsequent incubations including temperature shifts that allow a comprehensive analysis of regulatory proteins involved in basolateral sorting.

This article details the procedures involved in overexpression and analysis of small GTPases in polarized epithelial cells using microinjection technique.

Epithelial cells polarize their plasma membrane into biochemically and functionally distinct apical and basolateral domains where the apical domain faces ...

Single Cell Transcriptional Profiling of Adult Mouse Cardiomyocytes

While numerous studies have examined gene expression changes from homogenates of heart tissue, this prevents studying the inherent stochastic variation between cells within a tissue. Isolation of pure cardiomyocyte populations through a collagenase perfusion of mouse hearts facilitates the generation of single cell microarrays for whole transcriptome gene expression, or qPCR of specific targets using nanofluidic arrays. We describe here a procedure to examine single cell gene expression profiles of cardiomyocytes isolated from the heart. This paradigm allows for the evaluation of metrics of interest which are not reliant on the mean (for example variance between cells within a tissue) which is not possible when using conventional whole tissue workflows for the evaluation of gene expression (Figure 1). We have achieved robust amplification of the single cell transcriptome yielding micrograms of double stranded cDNA that facilitates the use of microarrays on individual cells. In the procedure we describe the use of NimbleGen arrays which were selected for their ease of use and ability to customize their design. Alternatively, a reverse transcriptase - specific target amplification (RT-STA) reaction, allows for qPCR of hundreds of targets by nanofluidic PCR. Using either of these approaches, it is possible to examine the variability of expression between cells, as well as examining expression profiles of rare cell types from within a tissue. Overall, the single cell gene expression approach allows for the generation of data that can potentially identify idiosyncratic expression profiles that are typically averaged out when examining expression of millions of cells from typical homogenates generated from whole tissues.

Single cell expression profiling allows the detailed gene expression analysis of individual cells. We describe methods for the isolation of cardiomyocytes, and preparing the resulting lysates for either whole transcriptome microarray or qPCR of specific targets.

While numerous studies have examined gene expression changes from homogenates of heart tissue, this prevents studying the inherent stochastic variation ...

Isolation and Culture of Individual Myofibers and their Satellite Cells from Adult Skeletal Muscle

Muscle regeneration in the adult is performed by resident stem cells called satellite cells. Satellite cells are defined by their position between the basal lamina and the sarcolemma of each myofiber. Current knowledge of their behavior heavily relies on the use of the single myofiber isolation protocol. In 1985, Bischoff described a protocol to isolate single live fibers from the Flexor Digitorum Brevis (FDB) of adult rats with the goal to create an in vitro system in which the physical association between the myofiber and its stem cells is preserved 1. In 1995, Rosenblattmodified the Bischoff protocol such that myofibers are singly picked and handled separately after collagenase digestion instead of being isolated by gravity sedimentation 2, 3. The Rosenblatt or Bischoff protocol has since been adapted to different muscles, age or conditions 3-6. The single myofiber isolation technique is an indispensable tool due its unique advantages. First, in the single myofiber protocol, satellite cells are maintained beneath the basal lamina. This is a unique feature of the protocol as other techniques such as Fluorescence Activated Cell Sorting require chemical and mechanical tissue dissociation 7. Although the myofiber culture system cannot substitute for in vivo studies, it does offer an excellent platform to address relevant biological properties of muscle stem cells. Single myofibers can be cultured in standard plating conditions or in floating conditions. Satellite cells on floating myofibers are subjected to virtually no other influence than the myofiber environment. Substrate stiffness and coating have been shown to influence satellite cells' ability to regenerate muscles 8, 9 so being able to control each of these factors independently allows discrimination between niche-dependent and -independent responses. Different concentrations of serum have also been shown to have an effect on the transition from quiescence to activation. To preserve the quiescence state of its associated satellite cells, fibers should be kept in low serum medium 1-3. This is particularly useful when studying genes involved in the quiescence state. In serum rich medium, satellite cells quickly activate, proliferate, migrate and differentiate, thus mimicking the in vivo regenerative process 1-3. The system can be used to perform a variety of assays such as the testing of chemical inhibitors; ectopic expression of genes by virus delivery; oligonucleotide based gene knock-down or live imaging. This video article describes the protocol currently used in our laboratory to isolate single myofibers from the Extensor Digitorum Longus (EDL) muscle of adult mice (6-8 weeks old).

Isolation and culture of myofibers is the gold standard in vitro system to study the transition of satellite cells through quiescence, activation and differentiation. Importantly, the single myofiber culture system preserves the myofiber/stem cell association, which is an essential component of the muscle stem cell niche.

Muscle  regeneration in the adult is performed by resident stem cells called satellite  cells. Satellite cells are defined by  their position between the ...

Strategies for Tracking Anastasis, A Cell Survival Phenomenon that Reverses Apoptosis

Anastasis (Greek for &#8220;rising to life&#8221;) refers to the recovery of dying cells. Before these cells recover, they have passed through important checkpoints of apoptosis, including mitochondrial fragmentation, release of mitochondrial cytochrome c into the cytosol, activation of caspases, chromatin condensation, DNA damage, nuclear fragmentation, plasma membrane blebbing, cell shrinkage, cell surface exposure of phosphatidylserine, and formation of apoptotic bodies. Anastasis can occur when apoptotic stimuli are removed prior to death, thereby allowing dying cells to reverse apoptosis and potentially other death mechanisms. Therefore, anastasis appears to involve physiological healing processes that could also sustain damaged cells inappropriately. The functions and mechanisms of anastasis are still unclear, hampered in part by the limited tools for detecting past events after the recovery of apparently healthy cells. Strategies to detect anastasis will enable studies of the physiological mechanisms, the hazards of undead cells in disease pathology, and potential therapeutics to modulate anastasis. Here, we describe effective strategies using live cell microscopy and a mammalian caspase biosensor&#160;for identifying and tracking anastasis in mammalian cells.

The term anastasis refers to the phenomenon in which dying cells reverse a cell suicide process at a late stage, repair themselves, and ultimately survive. Here we demonstrate protocols for detecting and tracking cells that undergo anastasis.

Anastasis (Greek for &#8220;rising to life&#8221;) refers to the recovery of dying cells. Before these cells recover, they have passed through important ...

A Standardized Method for the Analysis of Liver Sinusoidal Endothelial Cells and Their Fenestrations by Scanning Electron Microscopy

Liver sinusoidal endothelial cells are the gateway to the liver, their transcellular fenestrations allow the unimpeded transfer of small and dissolved substances from the blood into the liver parenchyma for metabolism and processing. Fenestrations are dynamic structures - both their size and/or number can be altered in response to various physiological states, drugs, and disease, making them an important target for modulation. An understanding of how LSEC morphology is influenced by various disease, toxic, and physiological states and how these changes impact on liver function requires accurate measurement of the size and number of fenestrations. In this paper, we describe scanning electron microscopy fixation and processing techniques used in our laboratory to ensure reproducible specimen preparation and accurate interpretation. The methods include perfusion fixation, secondary fixation and dehydration, preparation for the scanning electron microscope and analysis. Finally, we provide a step by step method for standardized image analysis which will benefit all researchers in the field.

The fenestrated liver sinusoidal endothelial cell is a biologically important filter system that is highly influenced by various diseases, toxins, and physiological states. These changes significantly impact on liver function. We describe methods for the standardisation of the measurement of the size and number of fenestrations in these cells.

Liver sinusoidal endothelial cells are the gateway to the liver, their transcellular fenestrations allow the unimpeded transfer of small and dissolved ...

Measurement of Survival Time in Brachionus Rotifers: Synchronization of Maternal Conditions

Rotifers are microscopic cosmopolitan zooplankton used as models in ecotoxicological and aging studies due to their several advantages such as short lifespan, ease of culture, and parthenogenesis that enables clonal culture. However, caution is required when measuring their survival time as it is affected by maternal age and maternal feeding conditions. Here we provide a protocol for powerful and reproducible measurement of the survival time in Brachionus rotifers following a careful synchronization of culture conditions over several generations. Empirically, poor synchronization results in early mortality and a gradual decrease in survival rate, thus resulting in weak statistical power. Indeed, under such conditions, calorie restriction (CR) failed to significantly extend the lifespan of B. plicatilis although CR-induced longevity has been demonstrated with well-synchronized rotifer samples in past and present studies. This protocol is probably useful for other invertebrate models, including the fruitfly Drosophila melanogaster and the nematode Caenorhabditis elegans, because maternal age effects have also been reported in these species.

Measurement of Survival Time in Brachionus Rotifers: Synchronization of Maternal Conditions

Rotifers are microscopic zooplankton used as models in ecotoxicological and aging studies. Here we provide a protocol for powerful and reproducible measurement of survival time in Brachionus rotifers. Synchronization of culture conditions over several generations is of particular importance because maternal condition affects life history of offspring.

Rotifers are microscopic cosmopolitan zooplankton used as models in ecotoxicological and aging studies due to their several advantages such as short ...

Investigating the Detrimental Effects of Low Pressure Plasma Sterilization on the Survival of Bacillus subtilis Spores Using Live Cell Microscopy

Plasma sterilization is a promising alternative to conventional sterilization methods for industrial, clinical, and spaceflight purposes. Low pressure plasma (LPP) discharges contain a broad spectrum of active species, which lead to rapid microbial inactivation. To study the efficiency and mechanisms of sterilization by LPP, we use spores of the test organism Bacillus subtilis because of their extraordinary resistance against conventional sterilization procedures. We describe the production of B. subtilis spore monolayers, the sterilization process by low pressure plasma in a double inductively coupled plasma reactor, the characterization of spore morphology using scanning electron microscopy (SEM), and the analysis of germination and outgrowth of spores by live cell microscopy. A major target of plasma species is genomic material (DNA) and repair of plasma-induced DNA lesions upon spore revival is crucial for survival of the organism. Here, we study the germination capacity of spores and the role of DNA repair during spore germination and outgrowth after treatment with LPP by tracking fluorescently-labelled DNA repair proteins (RecA) with time-resolved confocal fluorescence microscopy. Treated and untreated spore monolayers are activated for germination and visualized with an inverted confocal live cell microscope over time to follow the reaction of individual spores. Our observations reveal that the fraction of germinating and outgrowing spores is dependent on the duration of LPP-treatment reaching a minimum after 120 s. RecA-YFP (yellow fluorescence protein) fluorescence was detected only in few spores and developed in all outgrowing cells with a slight elevation in LPP-treated spores. Moreover, some of the vegetative bacteria derived from LPP-treated spores showed an increase in cytoplasm and tended to lyse. The described methods for analysis of individual spores could be exemplary for the study of other aspects of spore germination and outgrowth.

Investigating the Detrimental Effects of Low Pressure Plasma Sterilization on the Survival of Bacillus subtilis Spores Using Live Cell Microscopy

This protocol illustrates the important consecutive steps required to assess the relevance of monitoring vitality parameter and DNA repair processes in reviving Bacillus subtilis spores after treatment with low pressure plasma by tracking fluorescence-labelled DNA repair proteins via time-resolved confocal microscopy and scanning electron microscopy.

Plasma sterilization is a promising alternative to conventional sterilization methods for industrial, clinical, and spaceflight purposes. Low pressure ...

Quantification of Site-specific Protein Lysine Acetylation and Succinylation Stoichiometry Using Data-independent Acquisition Mass Spectrometry

Post-translational modification (PTM) of protein lysine residues by N&#400;-acylation induces structural changes that can dynamically regulate protein functions, for example, by changing enzymatic activity or by mediating interactions. Precise quantification of site-specific protein acylation occupancy, or stoichiometry, is essential for understanding the functional consequences of both global low-level stoichiometry and individual high-level acylation stoichiometry of specific lysine residues. Other groups have reported measurement of lysine acetylation stoichiometry by comparing the ratio of peptide precursor isotopes from endogenous, natural abundance acylation and exogenous, heavy isotope-labeled acylation introduced after quantitative chemical acetylation of proteins using stable isotope-labeled acetic anhydride. This protocol describes an optimized approach featuring several improvements, including: (1) increased chemical acylation efficiency, (2) the ability to measure protein succinylation in addition to acetylation, and (3) improved quantitative accuracy due to reduced interferences using fragment ion quantification from data-independent acquisitions (DIA) instead of precursor ion signal from data-dependent acquisition (DDA). The use of extracted peak areas from fragment ions for quantification also uniquely enables differentiation of site-level acylation stoichiometry from proteolytic peptides containing more than one lysine residue, which is not possible using precursor ion signals for quantification. Data visualization in Skyline, an open source quantitative proteomics environment, allows for convenient data inspection and review. Together, this workflow offers unbiased, precise, and accurate quantification of site-specific lysine acetylation and succinylation occupancy of an entire proteome, which may reveal and prioritize biologically relevant acylation sites.

Here, we present unbiased quantification of site-specific protein acetylation and/or succinylation occupancy (stoichiometry) of an entire proteome through a ratiometric analysis of endogenous modifications to modifications introduced after quantitative chemical acylation using stable isotope-labeled anhydrides. In combination with sensitive data-independent acquisition mass spectrometry, accurate site occupancy measurements are obtained.

Post-translational modification (PTM) of protein lysine residues by N&#400;-acylation induces structural changes that can dynamically regulate protein ...