We thank the O'Bryan lab at UIC for critical experimental evaluation and discussion. This work was supported by American Heart Association Grant 11SDG5230003 to GKC and National Center for Advancing Translational Science - UIC Center for Clinical and Translational Sciences Grant UL1TR000050.

1. Cell Transfection
<ol>
	<li>Plate cells the day before transfection, plating fewer cells for immunofluorescence.
	<ol>
		<li>For immunofluorescence: in a 6-well plate, coat glass cover slips (1 per well) with 0.02% gelatin at 37 &deg;C for at least 4 hr, wash once with medium, and for each well, plate 1 x 105 HEK 293T cells in 2 ml complete growth medium [Dulbecco's modified Eagle's media (DMEM) plus 10% FBS].</li>
		<li>For flow cytometric and Western blot analyses: plate 1.2 x 105 HEK 293T cells/well in 2 ml complete growth medium in 6-well plate (0.3 x 105 HEK 293T cells in 0.5 ml complete growth medium per well in 24-well plate).</li>
	</ol>
	</li>
	<li>Prepare DNA for transfection according to manufacture's protocol: Effectene (Qiagen) is used for immunofluorescence. TransIT-LT1 (Mirus) is used for flow cytometric and Western blot analyses. Amount of DNA used is listed below.
	<table border="1">
		<tbody>
			<tr>
				<td>&nbsp;</td>
				<td>24-well plate (ng)</td>
				<td>6-well plate (ng)</td>
			</tr>
			<tr>
				<td>CFP-vector</td>
				<td>10</td>
				<td>50</td>
			</tr>
			<tr>
				<td>VNN-AKAP-Lbc</td>
				<td>200</td>
				<td>1000</td>
			</tr>
			<tr>
				<td>VCN-PDE4D3-FL(full-length PDE4D3)</td>
				<td>2.5, 5, 10, 20, 40, 80</td>
				<td>100</td>
			</tr>
			<tr>
				<td>VCN-PDE4D3-UCR1(a PDE4D3 N-terminal fragment containing the UCR1 domain)</td>
				<td>&nbsp;</td>
				<td>100</td>
			</tr>
			<tr>
				<td>VCN-PDE4D3-UCR2+CAT (a PDE4D3 C-terminal fragment containing the UCR2 and catalytic domains)</td>
				<td>&nbsp;</td>
				<td>100</td>
			</tr>
		</tbody>
	</table>
	Transfection using Effectene (6-well):
	<ol>
		<li>Add indicated amount of plasmid DNA + 4 &mu;l enhancer to 100 &mu;l buffer EC, mix, and incubate for 5 min at room temperature.</li>
	 <li>Add 5 &mu;l Effectene, mix, and incubate for 10 min at room temperature. Add drop-wise to cells.	 </li>
 </ol>
 Transfection using TransIT-LT1 (6-well/24-well):
 <ol>
		<li>Add indicated amount of plasmid DNA to 250 &mu;l/50 &mu;l of Opti-MEM I serum-free medium in a sterile tube.</li>
		<li>Add TransIT-LT1 reagent to the diluted DNA mixture and pipette gently to mix. (TransIT-LT1 Reagent:DNA ratio is 3 &mu;l of TransIT-LT1 reagent per 1 &mu;g of DNA).</li>
		<li>Incubate for 30 min at room temperature and add drop-wise to cells.</li>
	</ol>
 </li>
 </ol>
2. Cell Preparation for Flow Cytometry, Western Blot, and Immunofluorescence
<ol>
	<li>24 hr post transfection, check fluorescence under epifluorescence microscope before harvesting cells.</li>
	<li>Cell preparation for flow cytometric analysis:
	<ol>
		<li>Wash cells with 0.5 ml/2 ml ice-cold PBS for 24-well/6-well plates.</li>
		<li>Detach cells using 50 &mu;l/250 &mu;l 0.05% trypsin.</li>
		<li>Neutralize trypsin with 200 &mu;l/1 ml DMEM medium.</li>
		<li>Collect 250 &mu;l cells (for both 24-well and 6-well plate) by centrifugation at 500 x g for 5 min, use the remaining cells (1 ml) for Western blot analysis.</li>
		<li>Resuspend cells in 250 &mu;l FACS buffer [PBS + 0.5% (w/v) BSA + 2 mM EDTA], store on ice for flow cytometric analysis. Cells can also be fixed in 1% paraformaldehyde (in PBS) if flow cytometry analysis will not be immediate.</li>
	</ol>
	</li>
	<li>Cell preparation for Western blot analysis: carried out in parallel with cell preparation for flow cytometry analysis.
	<ol>
		<li>Wash cells 1x with 2 ml ice-cold PBS, lyse cells by adding 100 &mu;l of cell lysis buffer [10 mM sodium phosphate buffer, pH 6.95, 150 mM NaCl, 5 mM EDTA, 5 mM EGTA, 1% Triton X-100].</li>
		<li>Collect cell lysate by centrifugation for 10 min at 21,000 x g at 4 &deg;C.</li>
		<li>Quantify protein concentration by Bradford protein assay, load equal amounts of protein per lane for SDS-PAGE, and transfer to nitrocellulose for immunoblotting.</li>
	</ol>
	</li>
	<li>Cell preparation for immunofluorescence.
	<ol>
		<li>Rinse cells 3x with 2 ml PBS, fix cells in 1 ml of 3.7% paraformaldehyde (in PBS) for 10 min at room temperature, then wash 3x with 2 ml PBS for 5 min.</li>
		<li>Mount cover slip on a glass slide, using mounting medium. Seal the coverslip edges using nail polish if necessary.</li>
		<li>Store the slides at 4 &deg;C prior to examination.</li>
	</ol>
	</li>
</ol>
3. Flow Cytometry and Immunofluorescence Microscopy
<ol>
	<li>Flow cytometry is performed using a Beckman Coulter Cyan ADP, equipped with 488 nm, 405 nm, and 642 nm solid-state lasers. Summit software is used for acquisition and analysis.
	<ol>
		<li>Calibrate flow cytometer using standard beads.</li>
		<li>Plot Forward scatter (FSC)/Sideward scatter (SSC) on a linear scale for gating live cell population.</li>
		<li>Plot FSC/voltage pulse width for gating non-aggregated live cell population.</li>
		<li>Plot count/FL6 (CFP fluorescence, 405 nm) on a log scale for gating non-aggregated live CFP-positive cells.</li>
		<li>Plot count/FL1 (YFP fluorescence, 488 nm) on a log scale for BiFC intensity.</li>
		<li>Run YFP-CFP- double negative samples, adjust FSC, SSC, FL1 and FL6 photo multiplier tube (PMT) voltage to set the threshold for each signal.</li>
		<li>Run single positive (both YFP+ and CFP+) samples for future off-line compensation</li>
		<li>Acquire at least 10,000 gated events (non-aggregated live CFP+ cells) for analysis.</li>
	</ol>
	</li>
	<li>Immunofluorescence microscopy is performed using a Zeiss LSM 510 confocal microscope. Note: it is important to keep all settings (such as the zoom, pinhole, detector gain, amplifier offset, frame size, scan speed, scan average, and laser power) consistent between samples for proper comparison of all data.</li>
</ol>
4. Data Analysis (Performed Using Summit Software)
<ol>
	<li>Set up the analysis protocol similar to that for acquisition with proper gating: 
	Gate 1 in FSC/SSC dot plot for live cells. 
	Gate 2 in FSC/pulse width of Gate 1 for non-aggregated live cells. 
	Gate 3 in count/CFP of Gate 3 for non-aggregated CFP+ live cells.</li>
	<li>Compensate YFP and CFP signal using YFP+ and CFP+ single positive cells.</li>
	<li>Re-determine cut-off lines for CFP/YFP-positive cells.</li>
	<li>Export YFP mean fluorescence intensity (MFI) of CFP+ cells to Excel for data-plotting.</li>
	<li>Normalize YFP MFI to expression levels of AKAP-Lbc, PDE4D3, and loading control &alpha;-tubulin, as determined by Western blot.</li>
</ol>

<ol>
	<li>Collura, V., Boissy, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+protein-protein+complexes+to+interactomics.">From protein-protein complexes to interactomics.</a> Subcell Biochem. 43, 135-183 (2007).</li><li>Stumpf, M. P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Estimating+the+size+of+the+human+interactome.">Estimating the size of the human interactome.</a> Proc. Natl. Acad. Sci. U.S.A. 105, 6959-6964 (2008).</li><li>Shekhawat, S. S., Ghosh, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Split-protein+systems:+beyond+binary+protein-protein+interactions.">Split-protein systems: beyond binary protein-protein interactions.</a> Curr. Opin. Chem. Biol. 15, 789-797 (2011).</li><li>Dwane, S., Kiely, P. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tools+used+to+study+how+protein+complexes+are+assembled+in+signaling+cascades.">Tools used to study how protein complexes are assembled in signaling cascades.</a> Bioeng. Bugs. 2, 247-259 (2011).</li><li>Piehler, J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=New+methodologies+for+measuring+protein+interactions+in+vivo+and+in+vitro.">New methodologies for measuring protein interactions in vivo and in vitro.</a> Curr. Opin. Struct. Biol. 15, 4-14 (2005).</li><li>Kerppola, T. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Design+and+implementation+of+bimolecular+fluorescence+complementation+(BiFC)+assays+for+the+visualization+of+protein+interactions+in+living+cells.">Design and implementation of bimolecular fluorescence complementation (BiFC) assays for the visualization of protein interactions in living cells.</a> Nat. Protoc. 1, 1278-1286 (2006).</li><li>Shyu, Y. J., Suarez, C. D., Hu, C. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Visualization+of+ternary+complexes+in+living+cells+by+using+a+BiFC-based+FRET+assay.">Visualization of ternary complexes in living cells by using a BiFC-based FRET assay.</a> Nat. Protoc. 3, 1693-1702 (2008).</li><li>Wong, K. A., O'Bryan, J. P. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Bimolecular+fluorescence+complementation.">Bimolecular fluorescence complementation.</a> J. Vis. Exp. (50), e2643 (2011).</li><li>Sugarbaker, E. V., Thornthwaite, J. T., Temple, W. T., Ketcham, A. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Flow+cytometry:+general+principles+and+applications+to+selected+studies+in+tumor+biology.">Flow cytometry: general principles and applications to selected studies in tumor biology.</a> Int. Adv. Surg. Oncol. 2, 125-153 (1979).</li><li>Koshy, S., Alizadeh, P., Timchenko, L. T., Beeton, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+measurement+of+GLUT4+translocation+to+the+plasma+membrane+by+flow+cytometry.">Quantitative measurement of GLUT4 translocation to the plasma membrane by flow cytometry.</a> J. Vis. Exp. (45), e2429 (2010).</li><li>Smith, C. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Basic+confocal+microscopy.">Basic confocal microscopy.</a> Curr. Protoc. Mol. Biol. Chapter 14 (Unit 14), 11 (2008).</li><li>Westwick, J. K., Lamerdin, J. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Improving+drug+discovery+with+contextual+assays+and+cellular+systems+analysis.">Improving drug discovery with contextual assays and cellular systems analysis.</a> Methods Mol. Biol. 756, 61-73 (2011).</li><li>Kilpatrick, L. E., Holliday, N. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dissecting+the+pharmacology+of+G+protein-coupled+receptor+signaling+complexes+using+bimolecular+fluorescence+complementation.">Dissecting the pharmacology of G protein-coupled receptor signaling complexes using bimolecular fluorescence complementation.</a> Methods Mol. Biol. 897, 109-138 (2012).</li></ol>

The authors declare that they have no competing financial interests.

BiFC is a simple and sensitive method to study protein-protein interaction. This method cannot be used to identify new protein-protein interactions, however, it is especially convenient to confirm protein-protein interaction inside cells and to study functional properties; such as subcellular localization of protein complexes, mapping of protein-protein interaction sites, and for screening of small molecules/peptides that can modulate protein-protein interaction. Because VN and VC fragments are non-fluorescent, backgroun...

650,000 protein-protein interactions are estimated to exist in the human interactome, playing critical roles in maintaining normal cell functions 1,2. Besides co-immunoprecipitation (co-IP), the gold standard to study protein-protein interaction from cell lysate, several protein fragment complementation assays (PCA) have been developed to improve sensitivity in detecting protein-protein interaction inside cells 3. Techniques include F&ouml;rster resonance energy transfer (FRET), Bioluminescence Resonance Energy Transfer (BRET), and Bimolecular Fluorescence Complementation (BiFC) 4,5. BiFC is based on the facilitated association of two fragments of a fluorescent protein (here we use Venus; a YFP variant) that are each fused to a potential interacting protein partner (in this example we use AKAP-Lbc and PDE4D3). Interaction of the two proteins of interest inside cells results in functional fluorescence, which can be visualized by fluorescence microscopy using either live or fixed cells 6,7,8. Compared to other PCAs, BiFC is sensitive and less technically challenging, with potential to study the cellular localization in live cells. A major drawback of this technique however is that once formed, the fluorescent protein complex cannot be reversed. Therefore it is not a good method to study dynamic protein-protein interaction. In this paper, we use BiFC to map the interaction sites of PDE4D3 with AKAP-Lbc by monitoring the fluorescence intensities of Venus. Compared to traditional analysis using fluorescence microscopy, which is time-consuming and labor-intensive (if not carried out using automated high throughput machinery), flow cytometry provides a straightforward quantitative analysis of thousands of cells in a heterogeneous population over a short time 9,10. Here, by carrying out a side-by-side comparison of flow cytometric-BiFC analysis and traditional co-IP, we demonstrate that the two methods provide comparable data, however, flow cytometric BiFC analysis is less time consuming and uses less material which may be more useful when cells of interest are limited.

<table border="1">
	<tbody>
		<tr>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>REAGENTS</td>
		</tr>
		<tr>
			<td>Dulbecco's modified Eagle's media (DMEM)</td>
			<td>Invitrogen</td>
			<td>11965-092</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Penicilin-Streptomycin (pen/strep), 100x</td>
			<td>Invitrogen</td>
			<td>15070-063</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Fetal Bovine Serum (FBS)</td>
			<td>Invitrogen</td>
			<td>16000-044</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Anti-Flag antibody</td>
			<td>Sigma</td>
			<td>M2, F1804</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Anti-HA antibody</td>
			<td>Covance</td>
			<td>16B12, MMS-101R</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>&alpha;-tubulin</td>
			<td>Sigma</td>
			<td>DM1A, T9026</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Anti-GFP antibody</td>
			<td>Clontech</td>
			<td>632569</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Cell culture plates, 6-well tissue culture treated</td>
			<td>Thermo Fisher Scientific</td>
			<td>130184</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>HEK 293T cells</td>
			<td>ATCC</td>
			<td>CRL-11268</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Maxiprep plasmid purification kit, high speed</td>
			<td>Qiagen</td>
			<td>12663</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Dulbecco's Phosphate-buffered saline (DPBS), sterile 1x</td>
			<td>Invitrogen</td>
			<td>14190-144</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Trypsin-EDTA, 0.05% (w/v)</td>
			<td>Gibco</td>
			<td>25300</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Polystyrene round-bottom tubes for FACS staining</td>
			<td>BD Biosciences</td>
			<td>352052</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Paraformaldehyde</td>
			<td>Fisher Scientific</td>
			<td>S74337MF</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Prolong gold antifade reagent with DAPI</td>
			<td>Invitrogen</td>
			<td>P-36931</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Superfrost plus Microscope slides</td>
			<td>Fisher Scientific</td>
			<td>12-550-15</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Fisherfinest premium cover glass</td>
			<td>Fisher Scientific</td>
			<td>12-548-5P</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
			<td>EQUIPMENT</td>
		</tr>
		<tr>
			<td>CO2 air-jacketed Incubator</td>
			<td>NuAIR DH autoflow</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Confocal microscope LSM510 META</td>
			<td>Carl Zeiss, Inc</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Electrophoresis and transfer unit</td>
			<td>Biorad</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
		</tr>
		<tr>
			<td>Cyan ADP Flow Cytometer</td>
			<td>Beckman Coulter</td>
			<td>&nbsp;</td>
			<td>&nbsp;</td>
		</tr>
	</tbody>
</table>

flow cytometric analysis of bimolecular fluorescence complementation: a high throughput quantitative method to study protein-protein interaction

Among methods to study protein-protein interaction inside cells, Bimolecular Fluorescence Complementation (BiFC) is relatively simple and sensitive. BiFC is based on the production of fluorescence using two non-fluorescent fragments of a fluorescent protein (Venus, a Yellow Fluorescent Protein variant, is used here). Non-fluorescent Venus fragments (VN and VC) are fused to two interacting proteins (in this case, AKAP-Lbc and PDE4D3), yielding fluorescence due to VN-AKAP-Lbc-VC-PDE4D3 interaction and the formation of a functional fluorescent protein inside cells.
BiFC provides information on the subcellular localization of protein complexes and the strength of protein interactions based on fluorescence intensity. However, BiFC analysis using microscopy to quantify the strength of protein-protein interaction is time-consuming and somewhat subjective due to heterogeneity in protein expression and interaction. By coupling flow cytometric analysis with BiFC methodology, the fluorescent BiFC protein-protein interaction signal can be accurately measured for a large quantity of cells in a short time. Here, we demonstrate an application of this methodology to map regions in PDE4D3 that are required for the interaction with AKAP-Lbc. This high throughput methodology can be applied to screening factors that regulate protein-protein interaction.

AKAP-Lbc and PDE4D3 constructs (Figure 1B) were fused to VN and VC fragments, respectively. Interaction of AKAP-Lbc and PDE4D3 results in functional YFP fluorescence (Figure 1A). Here we use the BiFC method to map AKAP-Lbc-binding sites in PDE4D3. Upstream conserved region 1 (UCR1), upstream conserved region 2 (UCR2) and catalytic region (CAT) are conserved among PDE4 family proteins, therefore, full length (FL), UCR1 and UCR2 plus CAT were used for screening the binding site of PDE4D3 t...

Watch this Scientific Journal Video about Flow Cytometric Analysis of Bimolecular Fluorescence Complementation: A High Throughput Quantitative Method to Study Protein-protein Interaction at JoVE.com

Flow Cytometric Analysis of Bimolecular Fluorescence Complementation: A High Throughput Quantitative Method to Study Protein-protein Interaction

Flow cytometric analysis of Bimolecular Fluorescence Complementation provides a high throughput quantitative method to study protein-protein interaction. This methodology can be applied to mapping protein binding sites and for screening factors that regulate protein-protein interaction.

Among methods to study protein-protein interaction inside cells, Bimolecular Fluorescence Complementation (BiFC) is relatively simple and sensitive. BiFC ...

flow-cytometric-analysis-bimolecular-fluorescence-complementation

Research

JoVE Journal

Biology

18.3K vues.  University of Illinois at Chicago. L'analyse par cytométrie de complémentation de fluorescence bimoléculaire fournit une méthode quantitative à haut débit pour étudier l'interaction protéine-protéine. Cette méthode peut être appliquée à des sites de liaison aux protéines de cartographie et de criblage de facteurs qui régulent l'interaction protéine-protéine.

Vidéo: Flow Cytometric Analysis of Bimolecular Fluorescence Complementation: A High Throughput Quantitative Method to Study Protein-protein Interaction

A Neuronal and Astrocyte Co-Culture Assay for High Content Analysis of Neurotoxicity

High Content Analysis (HCA) assays combine cells and detection reagents with automated imaging and powerful image analysis algorithms, allowing measurement of multiple cellular phenotypes within a single assay. In this study, we utilized HCA to develop a novel assay for neurotoxicity. Neurotoxicity assessment represents an important part of drug safety evaluation, as well as being a significant focus of environmental protection efforts. Additionally, neurotoxicity is also a well-accepted in vitro marker of the development of neurodegenerative diseases such as Alzheimer's and Parkinson's diseases. Recently, the application of HCA to neuronal screening has been reported. By labeling neuronal cells with &beta;III-tubulin, HCA assays can provide high-throughput, non-subjective, quantitative measurements of parameters such as neuronal number, neurite count and neurite length, all of which can indicate neurotoxic effects. However, the role of astrocytes remains unexplored in these models. Astrocytes have an integral role in the maintenance of central nervous system (CNS) homeostasis, and are associated with both neuroprotection and neurodegradation when they are activated in response to toxic substances or disease states. GFAP is an intermediate filament protein expressed predominantly in the astrocytes of the CNS. Astrocytic activation (gliosis) leads to the upregulation of GFAP, commonly accompanied by astrocyte proliferation and hypertrophy. This process of reactive gliosis has been proposed as an early marker of damage to the nervous system. The traditional method for GFAP quantitation is by immunoassay. This approach is limited by an inability to provide information on cellular localization, morphology and cell number. We determined that HCA could be used to overcome these limitations and to simultaneously measure multiple features associated with gliosis - changes in GFAP expression, astrocyte hypertrophy, and astrocyte proliferation - within a single assay. In co-culture studies, astrocytes have been shown to protect neurons against several types of toxic insult and to critically influence neuronal survival. Recent studies have suggested that the use of astrocytes in an in vitro neurotoxicity test system may prove more relevant to human CNS structure and function than neuronal cells alone. Accordingly, we have developed an HCA assay for co-culture of neurons and astrocytes, comprised of protocols and validated, target-specific detection reagents for profiling &beta;III-tubulin and glial fibrillary acidic protein (GFAP). This assay enables simultaneous analysis of neurotoxicity, neurite outgrowth, gliosis, neuronal and astrocytic morphology and neuronal and astrocytic development in a wide variety of cellular models, representing a novel, non-subjective, high-throughput assay for neurotoxicity assessment. The assay holds great potential for enhanced detection of neurotoxicity and improved productivity in neuroscience research and drug discovery.

This article describes a novel protocol and reagent set designed for sensitive measurement of neurotoxic effects of compounds and treatments on co-cultures of neurons and astrocytes using high content analysis. Results demonstrate that high content analysis represents an exciting novel technology for neurotoxicity assessment.

High Content Analysis (HCA) assays combine cells and detection reagents with automated imaging and powerful image analysis algorithms, allowing ...

A high-throughput method to globally study the organelle morphology in S. cerevisiae

High-throughput methods to examine protein localization or organelle morphology is an effective tool for studying protein interactions and can help achieve an comprehensive understanding of molecular pathways. In Saccharomyces cerevisiae, with the development of the non-essential gene deletion array, we can globally study the morphology of different organelles like the endoplasmic reticulum (ER) and the mitochondria using GFP (or variant)-markers in different gene backgrounds. However, incorporating GFP markers in each single mutant individually is a labor-intensive process. Here, we describe a procedure that is routinely used in our laboratory. By using a robotic system to handle high-density yeast arrays and drug selection techniques, we can significantly shorten the time required and improve reproducibility. In brief, we cross a GFP-tagged mitochondrial marker (Apc1-GFP) to a high-density array of 4,672 nonessential gene deletion mutants by robotic replica pinning.  Through diploid selection, sporulation, germination and dual marker selection, we recover both alleles. As a result, each haploid single mutant contains Apc1-GFP incorporated at its genomic locus. Now, we can study the morphology of mitochondria in all non-essential mutant background. Using this high-throughput approach, we can conveniently study and delineate the pathways and genes involved in the inheritance and the formation of organelles in a genome-wide setting.

GFP-fusion proteins are widely used to visualize organelles by confocal microscopy. However, screening for mutations that affect the morphology of organelles generally requires individual mutagenesis and is time consuming. Here, we demonstrate a method to simultaneously incorporate organelle-GFP markers in almost 5,000 non-essential genes in yeast.

High-throughput methods to examine protein localization or organelle morphology is an effective tool for studying protein interactions and can help ...

Bimolecular Fluorescence Complementation (BiFC) Assay for Protein-Protein Interaction in Onion Cells Using the Helios Gene Gun

Investigation of gene function in diverse organisms relies on knowledge of how the gene products interact with each other in their normal cellular environment. The Bimolecular Fluorescence Complementation (BiFC) Assay1 allows researchers to visualize protein-protein interactions in living cells and has become an essential research tool. This assay is based on the facilitated association of two fragments of a fluorescent protein (GFP) that are each fused to a potential interacting protein partner. The interaction of the two protein partners would facilitate the association of the N-terminal and C-terminal fragment of GFP, leading to fluorescence. For plant researchers, onion epidermal cells are an ideal experimental system for conducting the BiFC assay because of the ease in obtaining and preparing onion tissues and the direct visualization of fluorescence with minimal background fluorescence. The Helios Gene Gun (BioRad) is commonly used for bombarding plasmid DNA into onion cells. We demonstrate the use of Helios Gene Gun to introduce plasmid constructs for two interacting Arabidopsis thaliana transcription factors, SEUSS (SEU) and LEUNIG HOMOLOG (LUH)2 and the visualization of their interactions mediated by BiFC in onion epidermal cells.

Bimolecular Fluorescence Complementation BiFC Assay for Protein-Protein Interaction in Onion Cells Using the Helios Gene Gun

This article illustrates how to properly use the BioRad Helios Gene Gun to introduce plasmid DNA into onion epidermal cells and how to test for protein-protein interactions in onion cells based on the principle of Bimolecular Fluorescence Complementation (BiFC)

Investigation of gene function in diverse organisms relies on knowledge of how the gene products interact with each other in their normal cellular ...

Quantification of dsDNA using the Hitachi F-7000 Fluorescence Spectrophotometer and PicoGreen Dye

Quantification of DNA, especially in small concentrations, is an important task with a wide range of biological applications including standard molecular biology assays such as synthesis and purification of DNA, diagnostic applications such as quantification of DNA amplification products, and detection of DNA molecules in drug preparations. During this video we will demonstrate the capability of the Hitachi F-7000 Fluorescence Spectrophotometer equipped with a Micro Plate Reader accessory to perform dsDNA quantification using Molecular Probes Quant-it PicoGreen dye reagent kit.
The F-7000 Fluorescence Spectrophotometer offers high sensitivity and high speed measurements. It is a highly flexible system capable of measuring fluorescence, luminescence, and phosphorescence. Several measuring modes are available, including wavelength scan, time scan, photometry and 3-D scan measurement. The spectrophotometer has sensitivity in the range of 50 picomoles of fluorescein when using a 300 &#956;L sample volume in the microplate, and is capable of measuring scan speeds of 60,000 nm/minute. It also has a wide dynamic range of up to 5 orders of magnitude which allows for the use of calibration curves over a wide range of concentrations. The optical system uses all reflective optics for maximum energy and sensitivity. The standard wavelength range is 200 to 750 nm, and can be extended to 900 nm when using one of the optional near infrared photomultipliers. The system allows optional temperature control for the plate reader from 5 to 60 degrees Celsius using an optional external temperature controlled liquid circulator. The microplate reader allows for the use of 96 well microplates, and the measuring speed for 96 wells is less than 60 seconds when using the kinetics mode.
Software controls for the F-7000 and Microplate Reader are also highly flexible. Samples may be set in either column or row formats, and any combination of wells may be chosen for sample measurements. This allows for optimal utilization of the microplate. Additionally, the software allows importing micro plate sample configurations created in Excel and saved in comma separated values, or "csv" format. Microplate measuring configurations can be saved and recalled by the software for convenience and increased productivity. Data results can be output to a standard report, to Excel, or to an optional Report Generator Program.

Demonstration of quantification of dsDNA using Molecular Probes PicoGreen dye and Hitachi F-7000 Fluorescence Spectrophotometer equipped with a microplate reader accessory.

Quantification of DNA, especially in small concentrations, is an important task with a wide range of biological applications including standard molecular ...

Bimolecular Fluorescence Complementation

Defining the subcellular distribution of signaling complexes is imperative to understanding the output from that complex. Conventional methods such as immunoprecipitation do not provide information on the spatial localization of complexes. In contrast, BiFC monitors the interaction and subcellular compartmentalization of protein complexes. In this method, a fluororescent protein is split into amino- and carboxy-terminal non-fluorescent fragments which are then fused to two proteins of interest. Interaction of the proteins results in reconstitution of the fluorophore (Figure 1)1,2. A limitation of BiFC is that once the fragmented fluorophore is reconstituted the complex is irreversible3. This limitation is advantageous in detecting transient or weak interactions, but precludes a kinetic analysis of complex dynamics. An additional caveat is that the reconstituted flourophore requires 30min to mature and fluoresce, again precluding the observation of real time interactions4. BiFC is a specific example of the protein fragment complementation assay (PCA) which employs reporter proteins such as green fluorescent protein variants (BiFC), dihydrofolate reductase, b-lactamase, and luciferase to measure protein:protein interactions5,6. Alternative methods to study protein:protein interactions in cells include fluorescence co-localization and F&ouml;rster resonance energy transfer (FRET)7. For co-localization, two proteins are individually tagged either directly with a fluorophore or by indirect immunofluorescence. However, this approach leads to high background of non-interacting proteins making it difficult to interpret co-localization data. In addition, due to the limits of resolution of confocal microscopy, two proteins may appear co-localized without necessarily interacting. With BiFC, fluorescence is only observed when the two proteins of interest interact. FRET is another excellent method for studying protein:protein interactions, but can be technically challenging. FRET experiments require the donor and acceptor to be of similar brightness and stoichiometry in the cell. In addition, one must account for bleed through of the donor into the acceptor channel and vice versa. Unlike FRET, BiFC has little background fluorescence, little post processing of image data, does not require high overexpression, and can detect weak or transient interactions. Bioluminescence resonance energy transfer (BRET) is a method similar to FRET except the donor is an enzyme (e.g. luciferase) that catalyzes a substrate to become bioluminescent thereby exciting an acceptor. BRET lacks the technical problems of bleed through and high background fluorescence but lacks the ability to provide spatial information due to the lack of substrate localization to specific compartments8. Overall, BiFC is an excellent method for visualizing subcellular localization of protein complexes to gain insight into compartmentalized signaling.

The subcellular localization of proteins is important in determining the spatio-temporal regulation of cell signaling. Here, we describe bimolecular fluorescence complementation (BiFC) as a straightforward method for monitoring the spatial interactions of proteins in the cell.

Defining the subcellular distribution of signaling complexes is imperative to understanding the output from that complex. Conventional methods such as ...

Detection of Protein Interactions in Plant using a Gateway Compatible Bimolecular Fluorescence Complementation (BiFC) System

We have developed a BiFC technique to test the interaction between two proteins in vivo. This is accomplished by splitting a yellow fluorescent protein (YFP) into two non-overlapping fragments. Each fragment is cloned in-frame to a gene of interest. These constructs can then be co-transformed into Nicotiana benthamiana via Agrobacterium mediated transformation, allowing the transit expression of fusion proteins. The reconstitution of YFP signal only occurs when the inquest proteins interact 1-7. To test and validate the protein-protein interactions, BiFC can be used together with yeast two hybrid (Y2H) assay. This may detect indirect interactions which can be overlooked in the Y2H. Gateway technology is a universal platform that enables researchers to shuttle the gene of interest (GOI) into as many expression and functional analysis systems as possible8,9. Both the orientation and reading frame can be maintained without using restriction enzymes or ligation to make expression-ready clones. As a result, one can eliminate all the re-sequencing steps to ensure consistent results throughout the experiments. We have created a series of Gateway compatible BiFC and Y2H vectors which provide researchers with easy-to-use tools to perform both BiFC and Y2H assays10. Here, we demonstrate the ease of using our BiFC system to test protein-protein interactions in N. benthamiana plants.

Detection of Protein Interactions in Plant using a Gateway Compatible Bimolecular Fluorescence Complementation BiFC System

We have developed a technique to test protein-protein interactions in plant. A yellow fluorescent protein (YFP) is split into two non-overlapping fragments. Each fragment is cloned in-frame to a gene of interest via Gateway system, enabling expression of fusion proteins. Reconstitution of YFP signal only occurs when the inquest proteins interact.

We have developed a BiFC technique to test the interaction between two proteins in vivo. This is accomplished by splitting a yellow fluorescent protein ...

A Liquid Phase Affinity Capture Assay Using Magnetic Beads to Study Protein-Protein Interaction: The Poliovirus-Nanobody Example

In this article, a simple, quantitative, liquid phase affinity capture assay is presented. Provided that one protein can be tagged and another protein labeled, this method can be implemented for the investigation of protein-protein interactions. It is based on one hand on the recognition of the tagged protein by cobalt coated magnetic beads and on the other hand on the interaction between the tagged protein and a second specific protein that is labeled. First, the labeled and tagged proteins are mixed and incubated at room temperature. The magnetic beads, that recognize the tag, are added and the bound fraction of labeled protein is separated from the unbound fraction using magnets. The amount of labeled protein that is captured can be determined in an indirect way by measuring the signal of the labeled protein remained in the unbound fraction. The described liquid phase affinity assay is extremely useful when conformational conversion sensitive proteins are assayed. The development and application of the assay is demonstrated for the interaction between poliovirus and poliovirus recognizing nanobodies1. Since poliovirus is sensitive to conformational conversion2 when attached to a solid surface (unpublished results), the use of ELISA is limited and a liquid phase based system should therefore be preferred. An example of a liquid phase based system often used in polioresearch3,4 is the micro protein A-immunoprecipitation test5. Even though this test has proven its applicability, it requires an Fc-structure, which is absent in the nanobodies6,7. However, as another opportunity, these interesting and stable single-domain antibodies8 can be easily engineered with different tags. The widely used (His)6-tag shows affinity for bivalent ions such as nickel or cobalt, which can on their turn be easily coated on magnetic beads. We therefore developed this simple quantitative affinity capture assay based on cobalt coated magnetic beads. Poliovirus was labeled with 35S to enable unhindered interaction with the nanobodies and to make a quantitative detection feasible. The method is easy to perform and can be established with a low cost, which is further supported by the possibility of effectively regenerating the magnetic beads.

In this article, a simple, quantitative, liquid phase affinity capture assay is presented. It is a reliable technique based on the interaction between magnetic beads and tagged proteins (e.g. nanobodies) on one hand and the affinity between the tagged protein and a second, labeled protein (e.g. poliovirus) on the other.

In this article, a simple, quantitative, liquid phase affinity capture assay is presented. Provided that one protein can be tagged and another protein ...

Quantitative Analysis of Autophagy using Advanced 3D Fluorescence Microscopy

Prostate cancer is the leading form of malignancies among men in the U.S. While surgery carries a significant risk of impotence and incontinence, traditional chemotherapeutic approaches have been largely unsuccessful. Hormone therapy is effective at early stage, but often fails with the eventual development of hormone-refractory tumors. We have been interested in developing therapeutics targeting specific metabolic deficiency of tumor cells. We recently showed that prostate tumor cells specifically lack an enzyme (argininosuccinate synthase, or ASS) involved in the synthesis of the amino acid arginine1. This condition causes the tumor cells to become dependent on exogenous arginine, and they undergo metabolic stress when free arginine is depleted by arginine deiminase (ADI)1,10. Indeed, we have shown that human prostate cancer cells CWR22Rv1 are effectively killed by ADI with caspase-independent apoptosis and aggressive autophagy (or macroautophagy)1,2,3. Autophagy is an evolutionarily-conserved process that allows cells to metabolize unwanted proteins by lysosomal breakdown during nutritional starvation4,5. Although the essential components of this pathway are well-characterized6,7,8,9, many aspects of the molecular mechanism are still unclear - in particular, what is the role of autophagy in the death-response of prostate cancer cells after ADI treatment? In order to address this question, we required an experimental method to measure the level and extent of autophagic response in cells - and since there are no known molecular markers that can accurately track this process, we chose to develop an imaging-based approach, using quantitative 3D fluorescence microscopy11,12.
Using CWR22Rv1 cells specifically-labeled with fluorescent probes for autophagosomes and lysosomes, we show that 3D image stacks acquired with either widefield deconvolution microscopy (and later, with super-resolution, structured-illumination microscopy) can clearly capture the early stages of autophagy induction. With commercially available digital image analysis applications, we can readily obtain statistical information about autophagosome and lysosome number, size, distribution, and degree of colocalization from any imaged cell. This information allows us to precisely track the progress of autophagy in living cells and enables our continued investigation into the role of autophagy in cancer chemotherapy.

Autophagy is a ubiquitous process that enables cells to degrade and recycle proteins and organelles. We apply advanced fluorescence microscopy to visualize and quantify the small, but essential, physical changes associated with the induction of autophagy, including the formation and distribution of autophagosomes and lysosomes, and their fusion into autolysosomes.

Prostate cancer is the leading form of malignancies among men in the U.S. While surgery carries a significant risk of impotence and incontinence, ...

A High Throughput MHC II Binding Assay for Quantitative Analysis of Peptide Epitopes

Biochemical assays with recombinant human MHC II molecules can provide rapid, quantitative insights into immunogenic epitope identification, deletion, or design1,2. Here, a peptide-MHC II binding assay is scaled to 384-well format. The scaled down protocol reduces reagent costs by 75% and is higher throughput than previously described 96-well protocols1,3-5. Specifically, the experimental design permits robust and reproducible analysis of up to 15 peptides against one MHC II allele per 384-well ELISA plate. Using a single liquid handling robot, this method allows one researcher to analyze approximately ninety test peptides in triplicate over a range of eight concentrations and four MHC II allele types in less than 48 hr. Others working in the fields of protein deimmunization or vaccine design and development may find the protocol to be useful in facilitating their own work. In particular, the step-by-step instructions and the visual format of JoVE should allow other users to quickly and easily establish this methodology in their own labs.

Biochemical assays with recombinant human MHC II molecules can provide rapid, quantitative insights into immunogenic epitope identification, deletion, or design. &#160;Here, a peptide-MHC II binding assay scaled to 384-well plates is described. This cost effective format should prove useful in the fields of protein deimmunization and vaccine design and development.

Biochemical assays with recombinant human MHC II molecules can provide rapid, quantitative insights into immunogenic epitope identification, deletion, or ...

Protein-protein Interactions Visualized by Bimolecular Fluorescence Complementation in Tobacco Protoplasts and Leaves

Many proteins interact transiently with other proteins or are integrated into multi-protein complexes to perform their biological function. Bimolecular fluorescence complementation (BiFC) is an in vivo method to monitor such interactions in plant cells. In the presented protocol the investigated candidate proteins are fused to complementary halves of fluorescent proteins and the respective constructs are introduced into plant cells via agrobacterium-mediated transformation. Subsequently, the proteins are transiently expressed in tobacco leaves and the restored fluorescent signals can be detected with a confocal laser scanning microscope in the intact cells. This allows not only visualization of the interaction itself, but also the subcellular localization of the protein complexes can be determined. For this purpose, marker genes containing a fluorescent tag can be coexpressed along with the BiFC constructs, thus visualizing cellular structures such as the endoplasmic reticulum, mitochondria, the Golgi apparatus or the plasma membrane. The fluorescent signal can be monitored either directly in epidermal leaf cells or in single protoplasts, which can be easily isolated from the transformed tobacco leaves. BiFC is ideally suited to study protein-protein interactions in their natural surroundings within the living cell. However, it has to be considered that the expression has to be driven by strong promoters and that the interaction partners are modified due to fusion of the relatively large fluorescence tags, which might interfere with the interaction mechanism. Nevertheless, BiFC is an excellent complementary approach to other commonly applied methods investigating protein-protein interactions, such as coimmunoprecipitation, in vitro pull-down assays or yeast-two-hybrid experiments.

Formation of protein complexes in vivo can be visualized by bimolecular fluorescence complementation. Interaction partners are fused to complementary parts of fluorescent tags and transiently expressed in tobacco leaves, resulting in a reconstituted fluorescent signal upon close proximity of the two proteins.

Many proteins interact transiently with other proteins or are integrated into multi-protein complexes to perform their biological function. Bimolecular ...