This research was carried out at the Jet Propulsion Laboratory, California Institute of Technology, under a contract with the National Aeronautics and Space Administration. We acknowledge the support by the NASA Astrobiology Institute (Icy Worlds). L.M.B. is supported by the NAI through the NASA Postdoctoral Program, administered by Oak Ridge Associated Universities through a contract with NASA. J.E.N. was supported through a US Department of Education PR/Award #: P031C110019 administered through Citrus College. We acknowledge useful discussions with members of the NAI Thermodynamics, Disequilibrium, and Evolution Focus Group and the Blue Marble Space Institute of Science.

1. Safety Considerations
<ol>
	<li>Use personal protective equipment (lab coat, goggles, nitrile gloves, proper shoes) to prevent against chemical spills or injury. Use syringes and needles, and take care to not puncture gloves. Take care during experiment setup to check the apparatus for leaks by performing the injection first with double distilled H2O (ddH2O), and to check the stability of the reaction vials on the stand, before adding chemicals.</li>
	<li>Undertake this experiment with any chemical garden recipe, but one of the reactants we use to simulate deep-sea vents is a hazardous chemical, sodium sulfide; therefore do the entire experiment inside a fume hood to prevent exposure.
	<ol>
		<li>Only open the bottle of sodium sulfide in the fume hood and place a balance inside the fume hood for weighing sulfide. Always keep sulfide-containing solutions inside the fume hood as they release toxic H2S gas, and also keep sulfide liquid, sharps, and solid waste containers in the fume hood. Another reactant of interest is Fe(II)Cl2&#8226;4H2O, which oxidizes upon exposure to air, so take care to keep solutions anoxic and to grow chemical gardens under an anoxic headspace (e.g., N2 or Ar), always within a fume hood or glove box.</li>
	</ol>
	</li>
</ol>
2. Setup for Injection Experiments
<ol>
	<li>Create glass &#8220;injection vials&#8221; by cutting off the bottom 1 cm of a 100 ml clear glass crimp top serum bottle (20 mm crimp seal closure type) with a glass cutter so that, when inverted, the vessel is open to the air. As these are reusable, clean the vials in a 1 M HCl acid bath O/N, and then rinse well with ddH2O before a new experiment.</li>
	<li>Prepare the injection vials (Figure 1).
	<ol>
		<li>Collect a 20 mm septum, 20 mm aluminum crimp seal, and a 0.5-10 &#181;l plastic pipette tip. Using a 16 G syringe needle, carefully puncture a hole through the center of the septum, then remove and discard the needle in the appropriate sharps waste container.</li>
		<li>Insert the pipette tip into the needle hole, into the side of the rubber septum that will face inside the crimp top of the vial. Push the pipette tip through the septum so that it pokes out the other side.</li>
		<li>Crimp-seal the septum with pipette tip onto the injection vessel to make a watertight seal. When sealed, push the pipette tip further through the septum so that it protrudes outside.</li>
		<li>Affix 1/16&#8221; inner diameter clear flexible chemical-resistant tubing to the pipette tip (tubing length should reach from the injection vial to the syringe pump); slide it up for a watertight seal. 
		Note: This will be the injection tube, fed from the other end by a syringe with 16 G needle.</li>
		<li>Check for leaks: Insert a 10 ml syringe filled with ddH2O with a 16 G needle into the other end of the tubing (smoothly slide the tubing straight onto the needle and be careful not to puncture the wall of the tubing). Slowly inject so that the ddH2O moves up the tubing and into the bottom of the reaction vessel. Ensure that the syringe/tube, tube/tip, and crimp seals are watertight.</li>
	</ol>
	</li>
	<li>Clamp the injection vials on a stand in a fume hood, so that the injection will feed in from the bottom of the vial. 
	Note: Multiple vials can be set up at once and fed simultaneously by separate syringes.</li>
	<li>Set up electrodes for measuring membrane potential across the wall of the chemical gardens. Always use the same convention for which lead is &#8220;inside&#8221; and which is &#8220;outside&#8221; of the chemical gardens.
	<ol>
		<li>Cut lengths of insulated wire (e.g., copper) that reach from inside the reaction vessels to the lead of the multimeter or data logger. Leave a little bit of slack in the wires for positioning.</li>
		<li>Strip ~3 mm of the wire bare at the ends that will be located inside the reaction vial. At the other ends that will be connected to the multimeter leads, strip ~1 cm of wire.</li>
		<li>Fix the wires in place to measure membrane potential across the chemical garden. For the wire that will go inside the chemical garden: insert it into the opening of the pipette tip from which fluid will feed into the vessel.</li>
		<li>Push the wire in lightly to ensure contact with the injection solution, but not so far that it will clog the injection flow. For the outside wire: place it so that it will be in contact with the solution reservoir but not with the chemical garden precipitate.</li>
		<li>Tape or otherwise secure the wires so that they cannot move inside the injection vial during the experiment (Figure 2).</li>
		<li>Attach the other ends of the wires to the multimeter, and secure the wires so that those ends also do not move throughout the experiment.</li>
	</ol>
	</li>
	<li>Set up N2 gas lines that will each feed into one of the injection vials.
	<ol>
		<li>Split the gas feed from a N2 source into several tubes, so that there is one N2 feed for each injection vial.</li>
		<li>Place each N2 tube so that it feeds into the headspace of one of the injection vials.</li>
	</ol>
	</li>
</ol>
3. Preparation of Solutions for Chemical Garden Growth
<ol>
	<li>Prepare the reservoir solution, 100 ml for each experiment. Note: In this example, use 75 mM Fe2+ and 25 mM Fe3+ as the precipitating cations (Table 1).
	<ol>
		<li>Create anoxic solutions by first bubbling the ddH2O with N2 gas for ~15 min per 100 ml.</li>
		<li>Weigh out and add the FeCl2&#8226;4H2O and FeCl3&#8226;6H2O, stirring gently to dissolve (not vigorously so as to not introduce oxygen).</li>
		<li>After reagents are dissolved, immediately resume light bubbling of the Fe2+/Fe3+ solution with N2 gas while injections are prepared.</li>
	</ol>
	</li>
	<li>Choose any two of the primary injection solutions shown in Table 1, and prepare 10 ml of each. Fill a 10 ml syringe to the 7 ml mark with each of the solutions (one syringe for each solution). Replace the needle caps and set aside.</li>
	<li>Prepare 20 ml of the secondary injection solution (sodium sulfide &#8212; CAUTION) shown in Table 1. Fill two 10 ml syringes to the 7 ml mark with this solution, replace the needle caps and set aside. Always keep sulfide-containing solutions and syringes in the fume hood.</li>
	<li>Refill the ddH2O syringes from Step 2.2.5; these will be used to flush the injection tube.</li>
</ol>
4. Starting the Primary Injection
<ol>
	<li>Use desired data logger for membrane potential measurements; measure each experiment&#8217;s potential on a separate channel, and set the scan rate to give the desired amount of data points (e.g., for a 2-hr injection, recording potential every 30 sec would be sufficient).</li>
	<li>Secure the primary injection syringes on the programmable syringe pump in the fume hood.</li>
	<li>Use a waste beaker to catch drips and set the syringe pump to inject at a fast rate until the syringes both begin to drip into the beaker. Then stop the injection (in order to ensure that the two syringes begin injecting at exactly the same level).</li>
	<li>Re-program the syringe pump to inject at 2 ml per hour (calibrate for the type of syringe being used), but do not hit start.</li>
	<li>Insert the ddH2O syringes into the two plastic injection tubes, and inject so that the water fills the clear tubing up to the aperture where it enters the main reservoir. Place the syringes on the stand, above the injection vials.</li>
	<li>Pour 100 ml of the Fe2+/Fe3+ reservoir solution into each vial.</li>
	<li>Adjust the flow of the N2 gas lines as desired to keep the experiment anoxic for the duration of the injections.</li>
	<li>Carefully cover the reservoir vials with an airtight seal (e.g., using Parafilm; not obstructing the view through the glass) and insert an N2 feed into each vial (Figure 3).</li>
	<li>Bring the ddH2O syringes (still inserted in the tubing) down next to the primary injection syringes. Carefully slide the plastic injection tubing off the ddH2O syringe needle, and immediately transfer it directly onto one of the primary injection syringe needles. (Take care to not puncture the wall of the tubing.)</li>
	<li>Start the injection, and start recording of membrane potential.</li>
</ol>
5. Starting the secondary injection:
<ol>
	<li>Hit stop on the syringe pump after 3 hr (after 6 ml have been injected), once chemical garden structures have formed (Figure 4), continually generating a membrane potential (Figure 5).</li>
	<li>Carefully remove the primary injection syringes from the syringe pump (but leave them connected to the tubing so the structures are not disturbed); set them on the stand above the level of the fluid in the vials so that the fluid cannot flow back into the syringe.</li>
	<li>Secure the secondary injection sulfide syringes to the syringe pump, and repeat Steps 4.3 and 4.4.</li>
	<li>Remove the secondary syringes one at a time from the syringe pump, and, while holding the syringes above the level of the fluid in the vials, repeat Step 4.9, transferring the tubing from the primary syringes to the secondary syringes (Figure 6). Be vigilant that the fluid pressure from the reservoir into the syringe does not cause fluid to flow back into the syringe as this could collapse the chemical garden.</li>
	<li>When the transfer is complete, carefully secure the secondary syringes to the syringe pump.</li>
	<li>Re-program the syringe pump to inject at 2 ml per hour, and hit start to continue the injection with the new injection solution.</li>
	<li>Safely dispose of the primary injection syringes.</li>
</ol>
6. Ending the Experiment
<ol>
	<li>First stop the syringe pump, then stop recording of the membrane potential and save the data.</li>
	<li>Turn off the N2 flow and remove the lines and the Parafilm from the injection vessels.</li>
	<li>If desired, sample the reservoir solution or precipitate for further analysis. To carefully remove the reservoir solution and not disturb the precipitate, use a 25 ml pipette to carefully pipette off the reservoir solution in several aliquots, and discard the solution in a waste beaker.</li>
	<li>Unclamp the injection vessels one at a time and pour the solution into a waste transfer beaker in the fume hood. Use ddH2O to rinse out pieces of precipitate.</li>
	<li>Remove the syringes from the syringe pump, and extract them from the tubing, letting extra injection fluid run off into the waste transfer beaker. Empty the syringes into the waste beaker, and dispose of the syringes in a sulfide sharps container kept in the fume hood.</li>
	<li>Remove the tubing from the experiment vial and dispose of it in a solid waste bag. Uncrimp the seal and dispose of the septum, seal, and pipette tip.</li>
	<li>Rinse out the glass experiment vial and soak it in a 1 M HCl acid bath O/N. (CAUTION &#8212; glassware that has been in contact with sodium sulfide will release toxic H2S gas when placed in acid. Keep acid baths inside the fume hood.)</li>
</ol>

<ol>
	<li>Leduc, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=.">.</a> The Mechanism of Life. , (1911).</li><li>Coatman, R. D., Thomas, N. L., Double, D. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Studies+of+the+growth+of+&#8216;&#8216;silicate+gardens&#8217;&#8217;+and+related+phenomena.">Studies of the growth of &#8216;&#8216;silicate gardens&#8217;&#8217; and related phenomena.</a> J. Mater. Sci. 15, 2017-2026 (1980).</li><li>Barge, L. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+Chemical+Gardens+to+Chemobrionics.">From Chemical Gardens to Chemobrionics.</a> Chem. Rev. 115 (16), 8652-8703 (2015).</li><li>Russell, M. J., Hall, A. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+onset+and+early+evolution+of+life.">The onset and early evolution of life.</a> GSA Memoir. 198, 1-32 (2006).</li><li>Russell, M. J., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+Drive+to+Life+on+Rocky+and+Icy+Worlds.">The Drive to Life on Rocky and Icy Worlds.</a> Astrobiology. 14 (4), 308-343 (2014).</li><li>Macleod, G., Mckeown, C., Hall, A. J., Russell, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hydrothermal+and+oceanic+pH+conditions+at+4Ga+relevant+to+the+origin+of+life.">Hydrothermal and oceanic pH conditions at 4Ga relevant to the origin of life.</a> Origins Life Evol. B. 24, 19-41 (1994).</li><li>Mielke, R. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fabrication+and+Test+of+a+Hydrothermal+Reactor+for+Origin&#8208;Of&#8208;Life+Experiments.">Fabrication and Test of a Hydrothermal Reactor for Origin&#8208;Of&#8208;Life Experiments.</a> Astrobiology. 10, 799-810 (2010).</li><li>Russell, M. J., Hall, A. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+emergence+of+life+from+iron+monosulphide+bubbles+at+a+submarine+hydrothermal+redox+and+pH+front.">The emergence of life from iron monosulphide bubbles at a submarine hydrothermal redox and pH front.</a> J. Geol. Soc. Lond. 154, 377-402 (1997).</li><li>Vance, S., Harnmeijer, J., Kimura, J., Hussmann, H., Demartin, B., Brown, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hydrothermal+systems+in+small+ocean+planets.">Hydrothermal systems in small ocean planets.</a> Astrobiology. 7, 987-1005 (2007).</li><li>Ehlmann, B. L., Mustard, J. F., Murchie, S. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Geologic+setting+of+serpentine+deposits+on+Mars.">Geologic setting of serpentine deposits on Mars.</a> Geophys. Res. Lett. 37, L06201 (2010).</li><li>Hsu, H. -. W., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ongoing+hydrothermal+activities+within+Enceladus.">Ongoing hydrothermal activities within Enceladus.</a> Nature. 519, 207-210 (2015).</li><li>Cartwright, J. H. E., Garc&#237;a-Ruiz, J. M., Novella, M. L., Ot&#225;lora, F. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Formation+of+Chemical+Gardens.">Formation of Chemical Gardens.</a> J. Colloid Interf. Sci. 256, 351-359 (2002).</li><li>Barge, L. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+Iron-Phosphate-Silicate+Chemical+Garden+Structures.">Characterization of Iron-Phosphate-Silicate Chemical Garden Structures.</a> Langmuir. 28, 3714-3721 (2012).</li><li>Glaab, F., Kellermeier, M., Kunz, W., Morallon, E., Garc&#237;a-Ruiz, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Formation+and+Evolution+of+Chemical+Gradients+and+Potential+Differences+Across+Self-Assembling+Inorganic+Membranes.">Formation and Evolution of Chemical Gradients and Potential Differences Across Self-Assembling Inorganic Membranes.</a> Angew. Chem. Int. Edit. 124, 4393-4397 (2012).</li><li>Pagano, J. J., Thouvenel-Romans, S. T., Steinbock, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Compositional+analysis+of+copper&#8211;silica+precipitation+tubes.">Compositional analysis of copper&#8211;silica precipitation tubes.</a> Phys. Chem. Chem. Phys. 9, 110-116 (2006).</li><li>Parmar, K., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Characterization+of+cobalt+precipitation+tube+synthesized+through+&#8220;silica+garden&#8221;+route.">Characterization of cobalt precipitation tube synthesized through &#8220;silica garden&#8221; route.</a> Mater. Charact. 60, 863-868 (2009).</li><li>Parmar, K., Pramanik, A. K., Bandyopadhya, N. R., Bhattacharjee, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Synthesis+and+characterization+of+Fe(III)-silicate+precipitation+tubes.">Synthesis and characterization of Fe(III)-silicate precipitation tubes.</a> Mater. Res. Bull. 45, 1283-1287 (2010).</li><li>Cartwright, J. H. E., Escribano, B., Sainz-D&#237;az, I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemical-Garden+Formation,+Morphology,+and+Composition.+I.+Effect+of+the+Nature+of+the+Cations.">Chemical-Garden Formation, Morphology, and Composition. I. Effect of the Nature of the Cations.</a> Langmuir. 27, 3286-3293 (2011).</li><li>Stone, D. A., Goldstein, R. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Tubular+precipitation+and+redox+gradients+on+a+bubbling+template.">Tubular precipitation and redox gradients on a bubbling template.</a> P. Natl. Acad. Sci. USA. 101 (32), 11537-11541 (2004).</li><li>Makki, R., Ji, X., Mattoussi, H., Steinbock, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Self-Organized+Tubular+Structures+as+Platforms+for+Quantum+Dots.">Self-Organized Tubular Structures as Platforms for Quantum Dots.</a> J. Am. Chem. Soc. 136, 6463-6469 (2014).</li><li>Long, D. -. L., Tsunashima, R., Cronin, L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Polyoxometalates:+Building+Blocks+for+Functional+Nanoscale+Systems.">Polyoxometalates: Building Blocks for Functional Nanoscale Systems.</a> Angew. Chem. Int. Edit. 49, 1736-1758 (2010).</li><li>Mielke, R. E., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Iron-Sulfide-Bearing+Chimneys+as+Potential+Catalytic+Energy+Traps+at+Life&#8217;s+Emergence.">Iron-Sulfide-Bearing Chimneys as Potential Catalytic Energy Traps at Life&#8217;s Emergence.</a> Astrobiology. 11, 933-950 (2011).</li><li>Roszol, L., Steinbock, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Controlling+the+Wall+Thickness+and+Composition+of+Hollow+Precipitation+Tubes.">Controlling the Wall Thickness and Composition of Hollow Precipitation Tubes.</a> Phys. Chem. Chem. Phys. 13, 20100 (2011).</li><li>Ludwig, K. A., Kelley, D. S., Butterfield, D. A., Nelson, B. K., Fr&#252;h-Green, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Formation+and+evolution+of+carbonate+chimneys+at+the+Lost+City+Hydrothermal+Field.">Formation and evolution of carbonate chimneys at the Lost City Hydrothermal Field.</a> Geochim. Cosmochim. Ac. 70, 3625-3645 (2006).</li><li>Russell, M. J., Hall, A. J., Turner, D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vitro+growth+of+iron+sulphide+chimneys:+possible+culture+chambers+for+origin-of-life+experiments.">In vitro growth of iron sulphide chimneys: possible culture chambers for origin-of-life experiments.</a> Terra Nova. 1, 238-241 (1989).</li><li>Russell, M. J., Daniel, R. M., Hall, A. J., Sherringham, J. A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+hydrothermally+precipitated+catalytic+iron+sulphide+membrane+as+a+first+step+toward+life.">A hydrothermally precipitated catalytic iron sulphide membrane as a first step toward life.</a> J. Mol. Evol. 39 (3), 231-243 (1994).</li><li>Barge, L. M., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Pyrophosphate+Synthesis+in+Iron+Mineral+Films+and+Membranes+Simulating+Prebiotic+Submarine+Hydrothermal+Systems.">Pyrophosphate Synthesis in Iron Mineral Films and Membranes Simulating Prebiotic Submarine Hydrothermal Systems.</a> Geochim. Cosmochim. Ac. 128, 1-12 (2014).</li><li>McGlynn, S. E., Kanik, I., Russell, M. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Peptide+and+RNA+contributions+to+iron-sulphur+chemical+gardens+as+life's+first+inorganic+compartments,+catalysts,+capacitors+and+condensors.">Peptide and RNA contributions to iron-sulphur chemical gardens as life's first inorganic compartments, catalysts, capacitors and condensors.</a> Philos. T. R. Soc. S-A. 370, 3007-3022 (2012).</li><li>Cartwright, J. H. E., Escribano, B., Sainz-D&#237;az, C. I., Stocieck, L. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Chemical-Garden+Formation,+Morphology,+and+Composition.+II.+Chemical+Gardens+in+Microgravity.">Chemical-Garden Formation, Morphology, and Composition. II. Chemical Gardens in Microgravity.</a> Langmuir. 27, 3294-3300 (2011).</li><li>Thouvenel-Romans, S., Steinbock, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Oscillatory+Growth+of+Silica+Tubes+in+Chemical+Gardens.">Oscillatory Growth of Silica Tubes in Chemical Gardens.</a> J. Am. Chem. Soc. 125, 4338-4341 (2003).</li><li>Batista, B. C., Cruz, P., Steinbock, O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=From+Hydrodynamic+Plumes+to+Chemical+Gardens:+The+Concentration-Dependent+Onset+of+Tube+Formation.">From Hydrodynamic Plumes to Chemical Gardens: The Concentration-Dependent Onset of Tube Formation.</a> Langmuir. 30, 9123-9129 (2014).</li><li>Herschy, B., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=An+origin-of-life+reactor+to+simulate+alkaline+hydrothermal+vents.">An origin-of-life reactor to simulate alkaline hydrothermal vents.</a> J. Mol. Evol. 79, 213-227 (2014).</li><li>Yamaguchi, A., Yamamoto, M., Takai, K., Ishii, T., Hashimoto, K., Nakamura, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Electrochemical+CO2+Reduction+by+Ni-containing+Iron+Sulfides:+How+Is+CO2+Electrochemically+Reduced+at+Bisulfide-Bearing+Deep-sea+Hydrothermal+Precipitates?.">Electrochemical CO2 Reduction by Ni-containing Iron Sulfides: How Is CO2 Electrochemically Reduced at Bisulfide-Bearing Deep-sea Hydrothermal Precipitates?.</a> Electrochim. Acta. 141, 311-318 (2014).</li><li>Hansen, H. C. B., Guldberg, S., Erbs, M., Koch, C. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Kinetics+of+nitrate+reduction+by+green+rusts&#8212;effects+of+interlayer+anion+and+Fe+(II):+Fe+(III)+ratio.">Kinetics of nitrate reduction by green rusts&#8212;effects of interlayer anion and Fe (II): Fe (III) ratio.</a> Appl. Clay Sci. 18 (1), 81-91 (2001).</li><li>Trolard, F., Bourri&#233;, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fougerite+a+natural+layered+double+hydroxide+in+gley+soil:+habitus,+structure,+and+some+properties.">Fougerite a natural layered double hydroxide in gley soil: habitus, structure, and some properties.</a> Clay Minerals in Nature - Their Characterization, Modification and Application. , (2012).</li><li>van Oss, C. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Specifically+Impermeable+Precipitate+Membranes.">Specifically Impermeable Precipitate Membranes.</a> Surface and Colloid Science. , 115-144 (1984).</li><li>Baaske, P., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Extreme+accumulation+of+nucleotides+in+simulated+hydrothermal+pore+systems.">Extreme accumulation of nucleotides in simulated hydrothermal pore systems.</a> P. Natl. Acad. Sci. USA. 104, 9346-9351 (2007).</li></ol>

The authors declare that they have no competing financial interests.

The formation of a chemical garden structure via injection method can be accomplished by interfacing any two solutions containing reactive ions that produce a precipitate. There are many possible reaction systems that will produce precipitate structures and finding the right recipe of reactive ions and concentrations to grow a desired structure is a matter of trial and error. The flow rate of the injection solution is controlled by a programmable syringe pump and this can also be varied between experiments to simulate di...

&#8220;Chemical gardens&#8221; are self-assembling inorganic precipitates developed where two fluids of contrasting chemistries interact1,2. These self-assembling inorganic structures have been the subject of scientific interest for over a century partly due to their biomimetic appearance, and many experimental and theoretical studies have been pursued to understand the various complex aspects and possible functions of chemical garden systems3. Natural examples of chemical gardens include mineral &#8220;chimney&#8221; precipitates that grow around hydrothermal springs and seeps, and it has been argued that these could provide plausible environments for life to emerge4. To grow a chemical garden simulating a natural hydrothermal vent chimney, a reservoir solution should represent a simulated ocean composition and an injection solution should represent the hydrothermal fluid that feeds into the ocean. The versatility of this type of experiment to different reaction systems allows for simulation of almost any proposed ocean / hydrothermal fluid chemistry, including environments on the early Earth or on other worlds. On the early Earth, the oceans would have been anoxic, acidic (pH 5-6), and would have contained dissolved atmospheric CO2 and Fe2+, as well as FeIII, Ni2+, Mn2+, NO3-, and NO2-. Chemical reactions between this seawater and the ultramafic ocean crust would have produced an alkaline hydrothermal fluid containing hydrogen and methane, and in some cases sulfide (HS-)4-8. The chimneys formed in early Earth alkaline vent environments could thus have contained ferrous/ferric oxyhydroxides and iron/nickel sulfides, and it has been proposed that these minerals might have served particular catalytic and proto-enzymatic functions toward harnessing geochemical redox / pH gradients to drive the emergence of metabolism5. Likewise, on other worlds such as that may host (or may have hosted) water/rock interfaces &#8212; such as early Mars, Jupiter&#8217;s moon Europa, or Saturn&#8217;s moon Enceladus &#8212; it is possible that water/rock chemistry could generate alkaline vent environments capable of driving prebiotic chemistry or even providing habitable niches for extant life5,9-11.
The classic chemical garden experiment involves a seed crystal of a metal salt, e.g. ferrous chloride tetrahydrate FeCl2&#8226;4H2O, submerged in a solution containing reactive anions, e.g. sodium silicate or &#8220;water glass&#8221;. The metal salt dissolves, creating an acidic solution containing Fe2+ that interfaces with the more alkaline solution (containing silicate anions and OH-) and an inorganic membrane precipitate is formed. The membrane swells under osmotic pressure, bursts, then re-precipitates at the new fluid interface. This process repeats until the crystals are dissolved, resulting in a vertically oriented, self-organized precipitate structure with complex morphology at both macro and micro scales. This precipitation process results in the continued separation of chemically contrasting solutions across the inorganic chemical garden membrane, and the difference of charged species across the membrane yields a membrane potential12-14. Chemical garden structures are complex, exhibiting compositional gradients from interior to exterior13,15-19, and the walls of the structure maintain separation between contrasting solutions for long periods while remaining somewhat permeable to ions. In addition to being an ideal experiment for educational purposes (as they are simple to make for classroom demonstrations, and can educate students about chemical reactions and self-organization), chemical gardens have scientific significance as representations of self-assembly in dynamic, far-from-equilibrium systems, involving methods that can lead to the production of interesting and useful materials20,21.
Chemical gardens in the laboratory can also be grown via injection methods, in which the solution containing one precipitating ion is slowly injected into the second solution containing the co-precipitating ion (or ions). This results in the formation of chemical garden structures similar to those of crystal growth experiments, except that the properties of the system and the precipitate can be better controlled. The injection method has several significant advantages. It allows one to form a chemical garden using any combination of precipitating or incorporated species; i.e., multiple precipitating ions can be incorporated into one solution, and/or other non-precipitating components can be included in either solution to adsorb / react with the precipitate. The membrane potential generated in a chemical garden system can be measured in an injection experiment if an electrode is incorporated into the interior of the structure, thus enabling electrochemical study of the system. Injection experiments offer the ability to feed the injection solution into the interior of the chemical garden for controlled time frames by varying the injection rate or total injected volume; it is therefore possible to feed through different solutions sequentially and use the precipitated structure as a trap or reactor. Combined, these techniques allow for laboratory simulations of the complex processes that could have occurred in a natural chemical garden system at a submarine hydrothermal vent, including a chimney formed from many simultaneous precipitation reactions between ocean and vent fluid (e.g., producing metal sulfides, hydroxides, and/or carbonates and silicates)5,22. These techniques can also be applied to any chemical garden reaction system to allow for formation of new types of materials, e.g., layered tubes or tubes with adsorbed reactive species20,23.
We detail here an example experiment that includes the simultaneous growth of two chemical gardens, Fe2+-containing structures in an anoxic environment. In this experiment we incorporated trace amounts of polyphosphates and/or amino acids into the initial injection solution to observe their effect on the structure. After initial formation of the chemical garden we then switched the injection solution to introduce sulfide as a secondary precipitating anion. Measurements of membrane potentials were made automatically throughout the experiment. This protocol describes how to run two experiments at once using a dual syringe pump; the data shown required multiple runs of this procedure. The relatively high flow rates, low pH of the reservoir and reactant concentrations employed in our experiments are designed to form large chimney precipitates on time scales suitable for one-day laboratory experiments. However, fluid flow rates at natural hydrothermal springs can be much more diffuse and the concentrations of precipitating reactants (e.g., Fe and S in an early Earth system) could be an order of magnitude lower4; thus, structured precipitates would form over longer timescales and the vent could be active for tens of thousands of years24,25.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>Syringe Pump</td>
			<td>Fisher</td>
			<td>14-831-3</td>
			<td>Dual or multiple channel, depending on desired number of simultaneous experiments</td>
		</tr>
		<tr>
			<td>Ferrous chloride tetrahydrate</td>
			<td>Fisher</td>
			<td>I90500</td>
			<td>Ferrous Chloride Tetrahydrate (Crystalline/Certified)</td>
		</tr>
		<tr>
			<td>Ferric chloride hexahydrate</td>
			<td>Fisher</td>
			<td>I88-100&#160;</td>
			<td>Ferric&#160;Chloride&#160;Hexahydrate&#160;(Lumps/Certified ACS)</td>
		</tr>
		<tr>
			<td>Sodium hydroxide</td>
			<td>Sigma-Aldrich</td>
			<td>S5881</td>
			<td>reagent grade, &#8805;98%, pellets (anhydrous)</td>
		</tr>
		<tr>
			<td>Sodium sulfide nonahydrate</td>
			<td>Fisher</td>
			<td>S425212</td>
			<td>Sodium Sulfide Nonahydrate (Crystalline/Certified ACS).&#160; Store at -20C. Only open in a glove box or fume hood. Releases toxic H2S gas; all sulfide-containing solutions must be kept in a glove box or fume hood.</td>
		</tr>
		<tr>
			<td>Potassium pyrophosphate</td>
			<td>Sigma-Aldrich</td>
			<td align="right">322431</td>
			<td>97%, http://www.sigmaaldrich.com/catalog/product/aldrich/322431?lang=en&#38;region=US</td>
		</tr>
		<tr>
			<td>L-Alanine</td>
			<td>Sigma-Aldrich</td>
			<td>A7627</td>
			<td>http://www.sigmaaldrich.com/catalog/product/sigma/a7627?lang=en&#38;region=US</td>
		</tr>
		<tr>
			<td>Syringes (10cc)</td>
			<td>Fisher</td>
			<td>14-823-16E</td>
			<td>BD&#8482; Syringe with Luer-Lok Tips (Without Needle)</td>
		</tr>
		<tr>
			<td>Syringe needles (16 gauge)</td>
			<td>Fisher</td>
			<td>14-826-18B</td>
			<td>BD&#8482; General Use and PrecisionGlide Hypodermic Needles, 16 G x 1.5 in. (38mm)</td>
		</tr>
		<tr>
			<td>Tubing</td>
			<td>Cole Parmer</td>
			<td>EW-06407-71</td>
			<td>Tygon Lab Tubing, Non-DEHP, 1/16&#34;ID X 1/8&#34;OD</td>
		</tr>
		<tr>
			<td>Aluminum seals</td>
			<td>Fisher</td>
			<td>0337523C</td>
			<td>Thermo Scientific&#8482; National&#8482; Headspace 20mm Crimp Seals</td>
		</tr>
		<tr>
			<td>Gray butyl stoppers</td>
			<td>Fisher</td>
			<td>0337522AA</td>
			<td>Thermo Scientific&#8482; National&#8482; 20mm Septa for Headspace Vials</td>
		</tr>
		<tr>
			<td>Serum bottles</td>
			<td>Sigma-Aldrich</td>
			<td>33110-U</td>
			<td>Vials, crimp top, serum bottle, size 100 mL, clear glass, O.D. &#215; H 51.7 mm &#215; 94.5 mm. For these experiments, the bottom of the serum bottle should be cut off.</td>
		</tr>
		<tr>
			<td>Pipette tips</td>
			<td>VWR</td>
			<td>53511-682</td>
			<td>pipette tips 0.5-10 microliters</td>
		</tr>
		<tr>
			<td>Wire</td>
			<td>McMaster-Carr</td>
			<td>8073K661</td>
			<td>Solid Single-Conductor Wire, UL 1007/1569, 20 AWG, 300 VAC</td>
		</tr>
	</tbody>
</table>

chemical gardens as flow-through reactors simulating natural hydrothermal systems

Here we report experimental simulations of hydrothermal chimney growth using injection chemical garden methods. The versatility of this type of experiment allows for testing of various proposed ocean / hydrothermal fluid chemistries that could have driven reactions toward the origin of life in environments on the early Earth, early Mars, or even other worlds such as the icy moons of the outer planets. We show experiments that include growth of chemical garden structures under anoxic conditions simulating the early Earth, inclusion of trace components of phosphates / organics in the injection solution to incorporate them into the structure, a switch of the injection solution to introduce a secondary precipitating anion, and the measurement of membrane potentials generated by chemical gardens. Using this method, self-assembling chemical garden structures were formed that mimic the natural chimneys precipitated at submarine hydrothermal springs, and these precipitates can be used successfully as flow-through reactors by feeding through multiple successive &#8220;hydrothermal&#8221; injections.

Once the injection solution started to feed into the reservoir solution, a chemical garden precipitate began to form at the fluid interface and this structure continued to grow over the course of the injection (Figures 4-7). In the experiments reported here, the first injection was sodium hydroxide (which can be modified to include L-alanine and/or pyrophosphate), and the reservoir solution was a 1:3 mixture of Fe3+/Fe2+, yielding a mixed-redox-state iron oxyhydroxide precipitate. T...

Watch this Scientific Journal Video about Chemical Gardens as Flow-through Reactors Simulating Natural Hydrothermal Systems at JoVE.com

Chemical Gardens as Flow-through Reactors Simulating Natural Hydrothermal Systems

We describe chemical garden formation via injection experiments that allow for laboratory simulations of natural chemical garden systems that form at submarine hydrothermal vents.

Here we report experimental simulations of hydrothermal chimney growth using injection chemical garden methods. The versatility of this type of experiment ...

chemical-gardens-as-flow-through-reactors-simulating-natural

Research

JoVE Journal

Chemistry

14.4K ビュー.  California Institute of Technology. We describe chemical garden formation via injection experiments that allow for laboratory simulations of natural chemical garden systems that form at submarine hydrothermal vents.

ビデオ: Chemical Gardens as Flow-through Reactors Simulating Natural Hydrothermal Systems

Free Radicals in Chemical Biology: from Chemical Behavior to Biomarker Development

The involvement of free radicals in life sciences has constantly increased with time and has been connected to several physiological and pathological processes. This subject embraces diverse scientific areas, spanning from physical, biological and bioorganic chemistry to biology and medicine, with applications to the amelioration of quality of life, health and aging. Multidisciplinary skills are required for the full investigation of the many facets of radical processes in the biological environment and chemical knowledge plays a crucial role in unveiling basic processes and mechanisms. We developed a chemical biology approach able to connect free radical chemical reactivity with biological processes, providing information on the mechanistic pathways and products. The core of this approach is the design of biomimetic models to study biomolecule behavior (lipids, nucleic acids and proteins) in aqueous systems, obtaining insights of the reaction pathways as well as building up molecular libraries of the free radical reaction products. This context can be successfully used for biomarker discovery and examples are provided with two classes of compounds: mono-trans isomers of cholesteryl esters, which are synthesized and used as references for detection in human plasma, and purine 5',8-cyclo-2'-deoxyribonucleosides, prepared and used as reference in the protocol for detection of such lesions in DNA samples, after ionizing radiations or obtained from different health conditions.

Radical-based biomimetic chemistry has been applied to building-up libraries necessary for biomarker development.

The involvement of free radicals in life sciences has constantly increased with time and has been connected to several physiological and pathological ...

High-pressure Sapphire Cell for Phase Equilibria Measurements of CO2/Organic/Water Systems

The high pressure sapphire cell apparatus was constructed to visually determine the composition of multiphase systems without physical sampling. Specifically, the sapphire cell enables visual data collection from multiple loadings to solve a set of material balances to precisely determine phase composition. Ternary phase diagrams can then be established to determine the proportion of each component in each phase at a given condition. In principle, any ternary system can be studied although ternary systems (gas-liquid-liquid) are the specific examples discussed herein. For instance, the ternary THF-Water-CO2 system was studied at 25 and 40&#160;&#176;C and is described herein. Of key importance, this technique does not require sampling. Circumventing the possible disturbance of the system equilibrium upon sampling, inherent measurement errors, and technical difficulties of physically sampling under pressure is a significant benefit of this technique. Perhaps as important, the sapphire cell also enables the direct visual observation of the phase behavior. In fact, as the CO2 pressure is increased, the homogeneous THF-Water solution phase splits at about 2 MPa. With this technique, it was possible to easily and clearly observe the cloud point and determine the composition of the newly formed phases as a function of pressure.
The data acquired with the sapphire cell technique can be used for many applications. In our case, we measured swelling and composition for tunable solvents, like gas-expanded liquids, gas-expanded ionic liquids and Organic Aqueous Tunable Systems (OATS)1-4. For the latest system, OATS, the high-pressure sapphire cell enabled the study of (1) phase behavior as a function of pressure and temperature, (2) composition of each phase (gas-liquid-liquid) as a function of pressure and temperature and (3) catalyst partitioning in the two liquid phases as a function of pressure and composition. Finally, the sapphire cell is an especially effective tool to gather accurate and reproducible measurements in a timely fashion.

High-pressure Sapphire Cell for Phase Equilibria Measurements of CO2/Organic/Water Systems

The high pressure sapphire cell apparatus is a unique tool to study, without sampling, phase behavior under a wide range of pressures. Using a cathetometer, very precise volume measurements can be recorded to measure liquid expansion and phase composition. Thus, this synthetic method enables the study of (1) phase equilibria of multi-component mixtures and (2) the partition behavior of catalyst or model compounds as a function of pressure.

The high pressure sapphire cell apparatus was constructed to visually determine the composition of multiphase systems without physical sampling. ...

Ethylene Polymerizations Using Parallel Pressure Reactors and a Kinetic Analysis of Chain Transfer Polymerization

We demonstrate a method for high-throughput catalyst screening using a parallel pressure reactor starting from the initial synthesis of a nickel &#945;-diimine ethylene polymerization catalyst. Initial polymerizations with the catalyst lead to optimized reaction conditions, including catalyst concentration, ethylene pressure and reaction time. Using gas-uptake data for these reactions, a procedure to calculate the initial rate of propagation (kp) is presented. Using the optimized conditions, the ability of the nickel &#945;-diimine polymerization catalyst to undergo chain transfer with diethylzinc (ZnEt2) during ethylene polymerization was investigated. A procedure to assess the ability of the catalyst to undergo chain transfer (from molecular weight and 13C NMR data), calculate the degree of chain transfer, and calculate chain transfer rates (ke) is presented.

A protocol for the high-throughput analysis of polymerization catalyst, chain transfer polymerizations, polyethylene characterization, and reaction kinetic analysis is presented.

We demonstrate a method for high-throughput catalyst screening using a parallel pressure reactor starting from the initial synthesis of a nickel ...

Development of a Backbone Cyclic Peptide Library as Potential Antiparasitic Therapeutics Using Microwave Irradiation

Protein-protein interactions (PPIs) are intimately involved in almost all biological processes and are linked to many human diseases. Therefore, there is a major effort to target PPIs in basic research and in the pharmaceutical industry. Protein-protein interfaces are usually large, flat, and often lack pockets, complicating the discovery of small molecules that target such sites. Alternative targeting approaches using antibodies have limitations due to poor oral bioavailability, low cell-permeability, and production inefficiency.
Using peptides to target PPI interfaces has several advantages. Peptides have higher conformational flexibility, increased selectivity, and are generally inexpensive. However, peptides have their own limitations including poor stability and inefficiency crossing cell membranes. To overcome such limitations, peptide cyclization can be performed. Cyclization has been demonstrated to improve peptide selectivity, metabolic stability, and bioavailability. However, predicting the bioactive conformation of a cyclic peptide is not trivial. To overcome this challenge, one attractive approach it to screen a focused library to screen in which all backbone cyclic peptides have the same primary sequence, but differ in parameters that influence their conformation, such as ring size and position.
We describe a detailed protocol for synthesizing a library of backbone cyclic peptides targeting specific parasite PPIs. Using a rational design approach, we developed peptides derived from the scaffold protein Leishmania receptor for activated C-kinase (LACK). We hypothesized that sequences in LACK that are conserved in parasites, but not in the mammalian host homolog, may represent interaction sites for proteins that are critical for the parasites&#39; viability. The cyclic peptides were synthesized using microwave irradiation to reduce reaction times and increase efficiency. Developing a library of backbone cyclic peptides with different ring sizes facilitates a systematic screen for the most biological active conformation. This method provides a general, fast, and facile way to synthesize cyclic peptides.

A simple and general method for the synthesis of cyclic peptides using microwave irradiation is outlined. This procedure enables the synthesis of backbone cyclic peptides with a collection of different conformations while retaining the side chains and the pharmacophoric moieties., and therefore, allows to screen for the bioactive conformation.

Protein-protein interactions (PPIs) are intimately involved in almost all biological processes and are linked to many human diseases. Therefore, there is ...

Synthesis and Characterization of Supramolecular Colloids

Control over colloidal assembly is of utmost importance for the development of functional colloidal materials with tailored structural and mechanical properties for applications in photonics, drug delivery and coating technology. Here we present a new family of colloidal building blocks, coined supramolecular colloids, whose self-assembly is controlled through surface-functionalization with a benzene-1,3,5-tricarboxamide (BTA) derived supramolecular moiety. Such BTAs interact via directional, strong, yet reversible hydrogen-bonds with other identical BTAs. Herein, a protocol is presented that describes how to couple these BTAs to colloids and how to quantify the number of coupling sites, which determines the multivalency of the supramolecular colloids. Light scattering measurements show that the refractive index of the colloids is almost matched with that of the solvent, which strongly reduces the van der Waals forces between the colloids. Before photo-activation, the colloids remain well dispersed, as the BTAs are equipped with a photo-labile group that blocks the formation of hydrogen-bonds. Controlled deprotection with UV-light activates the short-range hydrogen-bonds between the BTAs, which triggers the colloidal self-assembly. The evolution from the dispersed state to the clustered state is monitored by confocal microscopy. These results are further quantified by image analysis with simple routines using ImageJ and Matlab. This merger of supramolecular chemistry and colloidal science offers a direct route towards light- and thermo-responsive colloidal assembly encoded in the surface-grafted monolayer.

A protocol for the synthesis and characterization of colloids coated with supramolecular moieties is described. These supramolecular colloids undergo self-assembly upon the activation of the hydrogen-bonds between the surface-anchored molecules by UV-light.

Control over colloidal assembly is of utmost importance for the development of functional colloidal materials with tailored structural and mechanical ...

Laser-heating and Radiance Spectrometry for the Study of Nuclear Materials in Conditions Simulating a Nuclear Power Plant Accident

Major and severe accidents have occurred three times in nuclear power plants (NPPs), at Three Mile Island (USA, 1979), Chernobyl (former USSR, 1986) and Fukushima (Japan, 2011). Research on the causes, dynamics, and consequences of these mishaps has been performed in a few laboratories worldwide in the last three decades. Common goals of such research activities are: the prevention of these kinds of accidents, both in existing and potential new nuclear power plants; the minimization of their eventual consequences; and ultimately, a full understanding of the real risks connected with NPPs. At the European Commission Joint Research Centre&#39;s Institute for Transuranium Elements, a laser-heating and fast radiance spectro-pyrometry facility is used for the laboratory simulation, on a small scale, of NPP core meltdown, the most common type of severe accident (SA) that can occur in a nuclear reactor as a consequence of a failure of the cooling system. This simulation tool permits fast and effective high-temperature measurements on real nuclear materials, such as plutonium and minor actinide-containing fission fuel samples. In this respect, and in its capability to produce large amount of data concerning materials under extreme conditions, the current experimental approach is certainly unique. For current and future concepts of NPP, example results are presented on the melting behavior of some different types of nuclear fuels: uranium-plutonium oxides, carbides, and nitrides. Results on the high-temperature interaction of oxide fuels with containment materials are also briefly shown.

We present experiments in which real nuclear fuel, cladding, and containment materials are laser heated to temperatures beyond 3,000 K while their behavior is studied by radiance spectroscopy and thermal analysis. These experiments simulate, on a laboratory scale, the formation of a lava-phase following a nuclear reactor core meltdown.

Major and severe accidents have occurred three times in nuclear power plants (NPPs), at Three Mile Island (USA, 1979), Chernobyl (former USSR, 1986) and ...

Minimum Burning Pressures of Water-based Emulsion Explosives

This manuscript describes a protocol to measure the minimum pressure required for sustained burning of water-based emulsion explosives. Pumping water-based emulsion explosives for blasting applications can be very hazardous, as demonstrated by a number of pump accidents around the globe in the last decades, including some that resulted in fatalities. In Canada, the recognition of this hazard has led to the development of pumping guidelines that were endorsed by both the explosives industry and the Explosive Regulatory Division of the Canadian government. In these guidelines, it was noted that the minimum burning pressures (MBP) measured in a laboratory would provide a good guide to characterize the behaviour of these products in pumping systems. The same guidelines also call for the design of pump systems that prevent, whenever possible, pressures from exceeding the MBP of the product being pumped. At the time of publication of these guidelines, a methodology existed for measuring such MBP values but it had never been validated to measure the MBP of ammonium nitrate water-based emulsions (AWEs). AWEs are now used much more widely than any other water-based explosives and precursors in on-site bulk loading operations.
The Canadian Explosives Research Laboratory (CanmetCERL) has been conducting research over the last ten years to develop a validated testing protocol to measure and interpret representative MBP values for AWEs. The test, as it is performed today, will be described and the critical components will be justified by reference to recent published data. Results of MBP measurements, for a range of AWE products, will be presented. Inclusion of the MBP test in the test standards for the authorization of high explosives in Canada will also be discussed.

We present an apparatus based on hot-wire ignition in a pressurized enclosure and an associated methodology to measure the minimum pressure required to induce sustained combustion in water-based emulsion explosives. This method improves product characterization to allow one to use them more safely during pumping and mixing operations.

This manuscript describes a protocol to measure the minimum pressure required for sustained burning of water-based emulsion explosives. Pumping ...

Utilization of Stop-flow Micro-tubing Reactors for the Development of Organic Transformations

A new reaction screening technology for organic synthesis was recently demonstrated by combining elements from both continuous micro-flow and conventional batch reactors, coined stop-flow micro-tubing (SFMT) reactors. In SFMT, chemical reactions that require high pressure can be screened in parallel through a safer and convenient way. Cross-contamination, which is a common problem in reaction screening for continuous flow reactors, is avoided in SFMT. Moreover, the commercially available light-permeable micro-tubing can be incorporated into SFMT, serving as an excellent choice for light-mediated reactions due to a more effective uniform light exposure, compared to batch reactors. Overall, the SFMT reactor system is similar to continuous flow reactors and more superior than batch reactors for reactions that incorporate gas reagents and/or require light-illumination, which enables a simple but highly efficient reaction screening system. Furthermore, any successfully developed reaction in the SFMT reactor system can be conveniently translated to continuous-flow synthesis for large scale production.

A protocol for organic reaction screening using stop-flow micro-tubing (SFMT) reactors employing gaseous reactants and/or visible-light mediated reactions is presented.

A new reaction screening technology for organic synthesis was recently demonstrated by combining elements from both continuous micro-flow and conventional ...

Reducing Willow Wood Fuel Emission by Low Temperature Microwave Assisted Hydrothermal Carbonization

Biomass is a sustainable fuel, as its CO2 emissions are reintegrated in biomass growth. However, the inorganic precursors in the biomass cause a negative environmental impact and slag formation. The selected short rotation coppice (SRC) willow wood has a high ash content (<img alt="Equation 1" src="/files/ftp_upload/58970/58970eq1.jpg" /> = 1.96%) and, therefore, a high content of emission and slag precursors. Therefore, the reduction of minerals from SRC willow wood by low temperature microwave assisted hydrothermal carbonization (MAHC) at 150 &#176;C, 170 &#176;C, and 185 &#176;C is investigated. An advantage of MAHC over conventional reactors is an even temperature conductance in the reaction medium, as microwaves penetrate the whole reactor volume. This allows a better temperature control and a faster cooldown. Therefore, a succession of depolymerization, transformation and repolymerization reactions can be analyzed effectively. In this study, the analysis of the mass loss, ash content and composition, heating values and molar O/C and H/C ratios of the treated and untreated SCR willow wood showed that the mineral content of the MAHC coal was reduced and the heating value increased. The process water showed a decreasing pH and contained furfural and 5-methylfurfural. A process temperature of 170 &#176;C showed the best combination of energy input and ash component reduction. The MAHC allows a better understanding of the hydrothermal carbonization process, while a large-scale industrial application is unlikely because of the high investment costs.

A protocol for the emission precursor depletion from low quality biomass by low temperature microwave assisted hydrothermal carbonization treatment is presented. This protocol includes the microwave parameters and the analysis of the biocoal product and process water.

Biomass is a sustainable fuel, as its CO2 emissions are reintegrated in biomass growth. However, the inorganic precursors in the biomass cause a negative ...

Separation of Uranium and Thorium for 230Th-U Dating of Submarine Hydrothermal Sulfides

The age of a submarine hydrothermal sulfide is a significant index for estimating the size of hydrothermal ore deposits. Uranium and thorium isotopes in the samples can be separated for 230Th-U dating. This article presents a method to purify and separate U and Th isotopes in submarine hydrothermal sulfide samples. Following this technique, the separated U and Th fractions can meet measuring requirements by multi-collector inductively coupled plasma mass spectrometry (MC-ICPMS). The age of the hydrothermal sulfide sample can be calculated by measuring the present-day activity ratios of 230Th/238U and 234U/238U. A super clean room is necessary for this experiment. Cleaned regents and supplies are used to reduce the contamination during the sample processes. Balance, hotplate, and centrifuge are also used. The sulfide sample is powdered for analysis and less than 0.2 g sample is used. Briefly, the sample is weighed, dissolved, added to 229Th-233U-236U double spike solution, Fe co-precipitated, and separated on an anion-exchange resin extraction column. Approximately 50 ng U is consumed for 230Th-U dating of sulfides sample by MC-ICPMS.

Separation of Uranium and Thorium for 230Th-U Dating of Submarine Hydrothermal Sulfides

The protocol describes a method to purify and separate the U and Th nuclide in submarine hydrothermal sulfide sample with Fe co-precipitation and extraction chromatography for 230Th-U disequilibrium dating.

The age of a submarine hydrothermal sulfide is a significant index for estimating the size of hydrothermal ore deposits. Uranium and thorium isotopes in ...