We would like to thank Dr. Hiroshi Miyazaki, Dr. Scott Henderson, Dr. Todd Kitten, Dr. Justin Hutcherson, Dr. Catherine Jauregui, and Collin R. Berry. This work was supported by NIH NIDCR grants R01DE016124, R01DE018039, and R01DE023304 to J.P. Lewis.
Microscopy was performed at the VCU Department of Anatomy and Neurobiology Microscopy Facility, supported, in part, with funding from NIH-NINDS Center core grant (5P30NS047463).

The following protocols will describe methods for culturing and studying the invasion by the anaerobic species, P. gingivalis; however, these protocols may be used for a number of anaerobic pathogens. Although HUVECs are used, this protocol may be used for other eukaryotic cells both immune and non-immune.
1. Anaerobic Chamber Use and Maintenance
Note: P. gingivalis is an anaerobe sensitive to normal levels of oxygen encountered in ambient air. A controlled anaerobic environment is vital for the cultivation of P. gingivalis.
<ol>
	<li>Here, maintain an artificial atmosphere designated as mixed anaerobic gas (80% N2, 10% H2, 10% CO2) in a vinyl anaerobic chamber (Figure 1A). Use an airlock (Figure 1B) for transferring items from the laboratory environment to the anaerobic chamber. The airlock operates manually, twice purging with N2 gas before introducing the mixed anaerobic gas.</li>
	<li>Use a hydrogen sulfide removal column (Figure 1C) for maintenance-free removal of the undesirable hydrogen sulfide. Place a dehumidifier within the chamber to remove H2O created by the catalyst and to avoid aerosols that facilitate the spread of contamination. 
	Note: Hydrogen sulfide is a natural metabolic byproduct of many anaerobic bacteria and its accumulation is toxic to bacteria and can result in damage to electronics and decrease the lifetime of a catalyst.</li>
	<li>Use a fan box to circulate the chamber&#8217;s atmosphere through a palladium catalyst, which removes oxygen in the presence of hydrogen (Figure 1D). 
	Note: A recirculating atmospheric (HEPA) filter removes airborne contaminants with a size of 0.22&#160;&#181;m or larger.</li>
	<li>Culture anaerobic bacteria in a 37 &#176;C incubator that is located inside of the anaerobic chamber. Use standard aseptic techniques when working inside the anaerobic chamber.</li>
</ol>
<img alt="Figure 1" src="/files/ftp_upload/53408/53408fig1.jpg" /> 
Figure 1. Anaerobic vinyl chamber and its components. (A) A vinyl anaerobic chamber sealed completely from atmospheric oxygen provides workspace for two individuals at a time (32 in x 78 in). It contains an incubator set at 37 &#176;C (back middle). (B) An airlock is used for the transfer of items from the lab environment to the anaerobic chamber. Pictured is an automatic airlock operated through a controller that can be programmed to automatically perform the vacuum and purge procedures needed to create an anaerobic environment. (C) A Hydrogen Sulfide Removal Column provides maintenance-free high capacity removal of undesirable hydrogen sulfide. (D) Two catalyst fan boxes are placed throughout the anaerobic chamber to help circulate the chamber&#8217;s atmosphere through palladium catalyst, which, in the presence of hydrogen, removes oxygen. The anaerobic chamber is set up according to manufacturer&#8217;s instructions. <a href="https://www.jove.com/files/ftp_upload/53408/53408fig1large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
2. Preparation of Anaerobic Bacteria
Note: P. gingivalis is aerotolerant and can be stored in aerobic conditions but it will not grow in the presence of oxygen at levels higher than 6%17,18. An anaerobic chamber is necessary for the proper cultivation of P. gingivalis and other anaerobic species (Figure 1). Proper training and education on anaerobic chamber use is required before working with microanaerobes19.
<ol>
	<li>Equilibrate all liquid media and plates to anaerobic conditions for at least 12 hr prior to experimentation to remove residual oxygen.</li>
	<li>Transfer P. gingivalis from -80 &#176;C freezer to anaerobic chamber, let thaw.</li>
	<li>Streak P. gingivalis on trypticase soy blood agar plates (TSA II with 5% sheep blood). Wrap plates in parafilm and store at 37 &#176;C in an anaerobic incubator for 4-7 days.</li>
	<li>Inoculate P. gingivalis into 3 ml brain heart infusion (BHI) broth supplemented with hemin and menadione, an enriched non-selective liquid media for the isolation and culture of anaerobic and fastidious microorganisms, using sterile loops. 
	Note: For long-term storage, mix bacterial cultures prepared in BHI with glycerol or DMSO (10-20% final concentration) and place in a -80 &#176;C freezer.</li>
	<li>Prepare a starter culture of P. gingivalis by making a 1:10 dilution and allowing bacteria to grow until mid-log phase.</li>
</ol>
Note: The optical density of the bacterial suspension is determined and the bacterial concentration for each strain to be examined is adjusted. For P. gingivalis a suspension at OD660 of 0.7 corresponds to mid-log phase and ~7 x 108 cells/ml. Growth conditions described in the protocol above are specific for P. gingivalis and may need to be adapted for other bacterial strains.
3. Endothelial Cell Culture
Note: Purchase pooled primary HUVECs and culture in basal medium containing vascular endothelial growth factors (VEGF) at 37 &#176;C in 5% CO2 according to manufacturer&#39;s instructions.
<ol>
	<li>Seed HUVECs in T-75 flasks at 2.5 x 105 cells/flask in 15 ml VEGF media. 
	Note: Check viability via a 1:1 dilution with 4.0% trypan blue. Cells with a compromised membrane will retain trypan blue, healthy cells with intact membranes will appear white when viewed under a binocular light microscope. Count 100 cells, ensure that over 80% of the cells are viable20.</li>
	<li>Replace media every 2 days with pre-warmed fresh VEGF media until cells reach ~80% confluency.</li>
	<li>Wash cells once with pre-warmed PBS. Liberate cells from the T75 flask by incubating with 2 ml trypsin-EDTA (0.25%) for 5 min followed by 2 ml trypsin neutralizing solution.</li>
	<li>Collect suspended HUVECs in a 50 ml conical tube. Wash out any extra cells from T-75 flasks with PBS and transfer to 50 ml conical tubes.</li>
	<li>Centrifuge cells at 200 x g for 10 min.</li>
	<li>Remove supernatant, suspend cell pellet in 10 ml pre-warmed VEGF media.</li>
	<li>Determine cell concentration using a hemocytometer or similar cell counting device.</li>
	<li>Calculate amount of cell suspension to add to either 6-well plate (400,000/well) or 12-well plate with coverslips (50,000/well). HUVECs will be ready for experimentation the next day.</li>
</ol>
4. Survival Assay Invasion/Interaction (Plating)
Note: When performing this assay, prepare two 6-well plates of endothelial cells seeded at 400,000 cells/well. One plate will be used to assess bacteria attached to and internalized by host cells. The other plate will account for intracellular bacteria. The 6-well plate allows for triplicates of two samples to be performed in one experiment. For an outline of this protocol please refer to the survival assay flowchart (Figure 2).
<ol>
	<li>Prepare anaerobic bacteria as described above (see section 1) until they reach mid-log growth (OD660 0.5-0.7).</li>
	<li>Centrifuge bacteria at 5,000 x g for 10 min. 
	Note: If centrifuge is outside anaerobic chamber, carry bacterial samples in a tightly sealed 15 ml tube, wrap the cap with parafilm to prevent oxygen leakage.</li>
	<li>Place pelleted P. gingivalis back in chamber, discard supernatant. Wash with PBS, pellet bacteria again before resuspending in VEGF media. Prepare suspensions for all bacterial strains to be tested at OD660 of 0.7 which corresponds to mid-log phase (~7 x 108 cells/ml). The bacteria are now ready for infection.</li>
	<li>Transfer 6-well plates containing HUVECs from tissue culture incubator into anaerobic chamber. Remove media and wash three times with anaerobic PBS. Add 2 ml of anaerobic VEGF media to each well and place the plates at 37 &#176;C in the anaerobic incubator for 20 min to equilibrate the temperature for infection. 
	Note: Plate bacteria on blood agar plates to ensure the ones used for infection are homogenous and not contaminated upon infection.</li>
	<li>Infect host cells with bacteria at a multiplicity of infection (MOI bacteria: host) of 100:1. 
	Note: HUVEC cell number is determined by performing a trypan exclusion test on a single well before infection. Bacterial cell number is determined via optical density (e.g., OD of 0.5 = 5 x 108 cells/ml). Bacterial concentration is adjusted to proper MOI based on HUVECs concentration21.</li>
	<li>Place 6-well plates with infected HUVECs into anaerobic incubator and allow bacteria to interact with host cells for 30 min.</li>
	<li>Prepare saponin in BHI (1.0% w/v) inside the anaerobic chamber and filter through a 0.2 &#181;m filter.</li>
	<li>Survival of both attached and internalized bacteria.
	<ol>
		<li>Remove plates from the incubator, aspirate media, wash three times with anaerobic PBS and add 2 ml filtered 1.0% saponin (prepared as described in step 4.8). Incubate for 15 min to allow host cell lysis.</li>
		<li>Scrape bottom of each well with cell scraper. Collect the cell mixture from each well and make a 1:1 dilution in BHI.</li>
		<li>Proceed to make serial dilutions of the sample. Depending on bacterial species and concentration, adjust serial dilutions. Start with 1:100 or 1:1,000 dilutions.</li>
		<li>Plate 200 &#181;l of desired dilution on blood agar plates. Wrap the plates in parafilm and place in the anaerobic incubator at 37 &#176;C.</li>
		<li>Following seven days of incubation at 37 &#176;C, remove the plates and count colony forming units (CFUs) using a light box to manually count colonies. 
		Note: CFUs are enumerated. For larger quantities of CFUs, images may be taken and computer software can be used to facilitate the enumeration of CFUs.</li>
	</ol>
	</li>
	<li>Survival of internalized bacteria.
	<ol>
		<li>Remove plates from the incubator. Wash three times with anaerobic PBS and add 2 ml VEGF media with supplemented antibiotic (300 &#181;g/ml of gentamicin and 400 &#181;g/ml of metronidazole).</li>
		<li>Incubate for 1 hr. Be sure to test the antibiotics so they are 100% effective at killing the desired bacterial strain and make sure that they do not penetrate host cells22,23.</li>
		<li>Aspirate media, add 2 ml of filtered 1.0% saponin. Incubate for 15 min to allow host cell lysis.</li>
		<li>Scrape bottom of each well with cell scraper. Collect the cell mixture from each well and make 1:1 dilution in BHI.</li>
		<li>Prepare serial dilutions of the sample (1:100, 1:1,000).</li>
		<li>Plate 200 &#181;l of desired dilution on blood agar plates. Wrap plates in parafilm and place in anaerobic incubator.</li>
		<li>After seven days of incubation at 37 &#176;C remove plates and count CFUs.</li>
	</ol>
	</li>
</ol>
<img alt="Figure 2" src="/files/ftp_upload/53408/53408fig2.jpg" /> 
Figure 2. Schematic representation of a protocol used for survival of anaerobic bacteria with eukaryotic cells. Both assays for a total bacterial survival and survival of internalized bacteria can be performed at the same time. <a href="https://www.jove.com/files/ftp_upload/53408/53408fig2large.jpg" target="_blank">Please click here to view a larger version of this figure.</a>
5. Internalization of Bacteria into Host Cells (Fluorescent Microscopy)
Note: P. gingivalis is labeled with 2&#39;,7&#39;-Bis-(2-Carboxyethyl)-5-(and-6)-Carboxyfluorescein, Acetoxymethyl Ester (BCECF-AM). BCECF-AM is a non-fluorescent membrane-permeable dye; its conversion to fluorescein BCECF via the action of intracellular esterases can indicate cell viability. P. gingivalis is labeled with the BCECF-AM dye and then used to infect eukaryotic cells. Following infection, cells are fixed and labeled with DAPI and TRITC-phalloidin. The DAPI stain used to stain the eukaryotic cell nucleus will also label bacterial cell nucleus, which provides a counter-measure to identify non-viable bacteria that cannot metabolically cleave BCECF-AM. Host cells are highlighted with TRITC-phalloidin, a red actin dye.
<ol>
	<li>Autoclave coverslips. Aseptically add coverslips to 12-well plates before seeding endothelial cells at 5 x 104 cells/well. (Prepared day before experiment)</li>
	<li>Have endothelial cells prepared on 18 mm (#1.5 thickness) circular coverslips in 12-well plates as described above.</li>
	<li>Prepare anaerobic bacteria grown to mid-log phase (OD660 = 0.5-0.7) as described in section 1.</li>
	<li>Wash bacteria 2x with anaerobic PBS by centrifuging at 5,000 x g and suspending pellet in PBS at 5-7 x 108 cells/ml.</li>
	<li>Add 20 &#181;l of 0.2 mM BCECF-AM to 2 ml of bacterial suspension (5-7 x 108 cells/ml) to a final concentration of BCECF-AM of 2 &#181;M.</li>
	<li>Incubate at 37 &#176;C for 30 min in the dark.</li>
	<li>Transfer plates with endothelial cells seeded on 18 mm (#1.5 thickness) circular coverslips from tissue culture incubator into the anaerobic chamber. Wash with PBS and exchange with anaerobic VEGF media. 
	Note: Verify that HUVECs are healthy under a light microscope. HUVECS should be ~80% confluent, morphology should be comparable to the manufacturers.</li>
	<li>Centrifuge labeled bacteria at 5,000 x g for 10 min to remove residual BCECF-AM dye. Suspend in 2 ml anaerobic VEGF media.</li>
	<li>Infect host cells with labeled bacteria at MOI of 100:1 (bacteria: host).</li>
	<li>Incubate in anaerobic chamber at 37 &#176;C for 30 min.</li>
	<li>After infection wash cells with PBS three times and fix in freshly prepared 4.0% paraformaldehyde for 10 min. 
	Note: After fixing cells, experiment can be conducted outside of the anaerobic chamber.</li>
	<li>Wash coverslips with PBS three times.</li>
	<li>Add 1 ml of 0.2% Triton X-100 for 10 min.</li>
	<li>Wash coverslips with PBS three times.</li>
	<li>Add 50 &#181;l of TRITC phalloidin (50 &#181;g/ml) to coverslips for 45 min.</li>
	<li>Wash coverslips three times, remove from the 12-well plate and place on a slide with soft-set mounting medium containing DAPI. Seal the sides with nail polish. 
	Note: Slides may be stored for a couple months in the dark. Avoid light exposure to prevent photo-bleaching.</li>
	<li>View slides using a confocal microscope.
	<ol>
		<li>Here, use a 34 channel spectral system (32-channel array detector and two side PMT detectors, plus a transmitted light detector) configured around an AxioObserver (inverted) stand with a motorized XY stage. The system has five lasers: blue diode (405 nm), multi-line Argon (458, 488, 514 nm), green diode (561 nm), red HeNe (633 nm) and a 440 nm pulsed laser. Equip a Fluorescence Lifetime Imaging system with 2 hybrid GaAsP detectors (for FRET-FLIM).</li>
		<li>Detect fluorescence from DAPI and TRITC in one channel using a dual-band filter with excitation wavelengths of 340-380 nm and 540-560 nm, and an emission filter of 435-485 nm and 570-590 nm respectively. Detect fluorescence from BCECF-AM using a filter with excitation wavelength of 440-500 nm and an emission filter of 510-590 nm. 
		Note: Controls for BCECF-AM should be done on every bacterial strain being studied to ensure proper labeling of viable bacteria. First validate that nonviable bacteria are DAPI-positive and BCECF-negative. Second, ensure that live bacteria can metabolize BCECF-AM into fluorescein BCECF. Variable concentrations of the bacteria or BCECF-AM dye may need to be tested for optimal labeling.</li>
	</ol>
	</li>
</ol>

Authors have nothing to disclose.

All the above methods can be used to design specific assays to assess the interaction of anaerobic bacteria with eukaryotic cells. However, there are several considerations to successfully perform the experiments. First are the microbial strains to be used in a study.
It is crucial in the comparison of two strains with both the survival assay as well as by microscopy analysis that they are at similar growth phases and attain similar cell concentrations as any differences in the above can influ...

Anaerobic bacteria colonize almost all surfaces of the human body. Although predominant in the flora of the intestinal and genitourinary tracts where oxygen concentrations are low, they also exist at high levels on the skin, mouth, nose, and throat1. Anaerobic bacteria are a common cause of endogenous infections and are frequently isolated from diseased sites. However, because of their fastidious nature, anaerobes can be difficult to isolate and culture. Studies involving anaerobic bacteria must be done under restricted conditions. Modern anaerobic-culture techniques allow researchers to mimic the anaerobic settings required to study many anaerobic laboratory strains or even clinical isolates2,3.
Pathogenic anaerobic bacteria have developed a dynamic relationship and co-evolution with the host cells in which they reside. Most anaerobes are susceptible to killing by the host immune response before reaching infectious levels. However, some pathogenic bacteria have developed mechanisms to escape from or subvert the host immune response. They accomplish this goal through mechanisms such as evasion of immune recognition, neutralization of immune mediators, alteration of cell-mediated immunity, invasion of host cells, and alteration of immune signaling4. Porphyromonas gingivalis, a Gram-negative anaerobe implicated in both oral and extraoral diseases, is one example of a highly adapted bacterial pathogen capable of causing pathogenic changes in the host5-7.
Pockets of biofilm plaque accrued in deep crevices formed between the teeth and gingival mucosal tissue can harbor anaerobic bacteria that are protected from atmospheric oxygen8. These periodontal pockets serve as a niche for various anaerobic pathogens, such as P. gingivalis9. P. gingivalis is a keystone pathogen that is capable of remodeling the oral microbial community in ways that promote development and progression of periodontal diseases10. It produces a large number of virulence factors that are active against a broad spectrum of host proteins and provides mechanisms for evasion of host defenses11. It is also capable of invading epithelial, endothelial, fibroblastic, and periodontal ligament cells in vitro12-14 and in vivo15. By effectively invading host cells, P. gingivalis can escape host immunity. Effective invasion of host cells not only allows the bacterium to escape host defenses but also serves as a reservoir for future re-infection as well as alters the host cell. Studies of the molecular mechanisms involved in adhesion and internalization of the bacterium by host cells are needed. Research in several laboratories is focused on understanding the molecular events associated with internalization of P. gingivalis by the host cells as well as the mechanisms used to suppress and hijack the immune response and survive the hostile host defense mechanisms.
There are many assays capable of identifying and characterizing pathogens that are capable of invading host cells. However, in vitro studies with anaerobic pathogens pose many experimental problems for the researcher mainly because it is difficult to perform studies that rely on bulky instruments in the absence of oxygen. This is compounded by the fact that eukaryotic cells require oxygen to grow and thus must be prepared separately in tissue culture incubators. One way to avoid such obstacles would be to perform the studies under atmospheric oxygen, but that would make growth of anaerobic bacteria impossible. Another method would be to use heat-killed bacteria to infect and study host-cell interactions. However, differences exist between heat-killed and viable bacteria that diminish the relevancy of the host-pathogen interaction16. It is central to study viable bacteria with unaltered expression interacting with host cells; therefore, methods for culturing P. gingivalis in an anaerobic setting are given. Also, two simple cost-effective protocols are demonstrated for assessing the ability of P. gingivalis to be internalized by human umbilical vein endothelial cells (HUVECs). The first protocol is based on the popular antibiotic protection assay. Although the assay is straightforward, considerations when using anaerobic microorganisms are given. The second protocol requires the use of a fluorescent scanning microscope to visualize interacting and internalized P. gingivalis. Each assay has its limitations and advantages that will be discussed to provide the researcher an outline for studying the invasiveness of anaerobic bacteria. Although the current manuscript studies P. gingivalis and HUVECs, these protocols can be used for many other anaerobic bacteria as well as for other types of host cells.

<table border="0" cellpadding="0" cellspacing="0">
	<tbody>
		<tr>
			<td>Vinyl Anaerobic Chamber-Type B</td>
			<td>Coy Laboratory Products</td>
			<td></td>
			<td>Model 2000 incubator&#160;</td>
		</tr>
		<tr>
			<td>TSA II Trypticase Soy Agar w/5% Sheep Blood</td>
			<td>BBL</td>
			<td>221261</td>
			<td></td>
		</tr>
		<tr>
			<td>Human Umbilical Vein Endothelial Cells 10-donor Pool</td>
			<td>LifeLine Technology</td>
			<td>FC-0044</td>
			<td></td>
		</tr>
		<tr>
			<td>VascuLife VEGF Medium Complete Kit</td>
			<td>LifeLine Technology</td>
			<td>LL-0003</td>
			<td></td>
		</tr>
		<tr>
			<td>TrypKit</td>
			<td>LifeLine</td>
			<td>LL-0013</td>
			<td></td>
		</tr>
		<tr>
			<td>Saponin</td>
			<td>Riedel-de Haen</td>
			<td>16109</td>
			<td></td>
		</tr>
		<tr>
			<td>Gentamicin Sulfate Salt</td>
			<td>Sigma-Aldrich</td>
			<td>G-1264</td>
			<td></td>
		</tr>
		<tr>
			<td>Metronidazole</td>
			<td>Sigma-Aldrich</td>
			<td>M-3761</td>
			<td></td>
		</tr>
		<tr>
			<td>BCECF-AM</td>
			<td>LifeTechnologies</td>
			<td>B1150</td>
			<td></td>
		</tr>
		<tr>
			<td>TRITC Phalloidin&#160;</td>
			<td>Sigma-Aldrich</td>
			<td>P1951</td>
			<td></td>
		</tr>
		<tr>
			<td>18 mm Circular Coverslips</td>
			<td>Electron Microscopy Sciences</td>
			<td>72222-01</td>
			<td></td>
		</tr>
		<tr>
			<td>VectaShield Mounting Medium with DAPI</td>
			<td>Vector Laboratories</td>
			<td>H-1200</td>
			<td></td>
		</tr>
	</tbody>
</table>

porphyromonas gingivalis as a model organism for assessing interaction of anaerobic bacteria with host cells

Anaerobic bacteria far outnumber aerobes in many human niches such as the gut, mouth, and vagina. Furthermore, anaerobic infections are common and frequently of indigenous origin. The ability of some anaerobic pathogens to invade human cells gives them adaptive measures to escape innate immunity as well as to modulate host cell behavior. However, ensuring that the anaerobic bacteria are live during experimental investigation of the events may pose challenges. Porphyromonas gingivalis, a Gram-negative anaerobe, is capable of invading a variety of eukaryotic non-phagocytic cells. This article outlines how to successfully culture and assess the ability of P. gingivalis to invade human umbilical vein endothelial cells (HUVECs). Two protocols were developed: one to measure bacteria that can successfully invade and survive within the host, and the other to visualize bacteria interacting with host cells. These techniques necessitate the use of an anaerobic chamber to supply P. gingivalis with an anaerobic environment for optimal growth.
The first protocol is based on the antibiotic protection assay, which is largely used to study the invasion of host cells by bacteria. However, the antibiotic protection assay is limited; only intracellular bacteria that are culturable following antibiotic treatment and host cell lysis are measured. To assess all bacteria interacting with host cells, both live and dead, we developed a protocol that uses fluorescent microscopy to examine host-pathogen interaction. Bacteria are fluorescently labeled with 2&#39;,7&#39;-Bis-(2-carboxyethyl)-5-(and-6)-carboxyfluorescein acetoxymethyl ester (BCECF-AM) and used to infect eukaryotic cells under anaerobic conditions. Following fixing with paraformaldehyde and permeabilization with 0.2% Triton X-100, host cells are labeled with TRITC phalloidin and DAPI to label the cell cytoskeleton and nucleus, respectively. Multiple images taken at different focal points (Z-stack) are obtained for temporal-spatial visualization of bacteria. Methods used in this study can be applied to any cultivable anaerobe and any eukaryotic cell type.

Protocols outlined above were used in studying host-pathogen interaction between P. gingivalis and endothelial cells. P. gingivalis W83 and a P. gingivalis V3150 carrying a deletion of PG0228 were used in the study. The PG0228 is predicted to encode a protein that may alter the levels of RNA and proteins, which may ultimately affect interaction of P. gingivalis with host cells. To investigate the effect of PG0228 on P. gingivalis&#8217;s ability to interact with host cells, th...

Watch this Scientific Journal Video about Porphyromonas gingivalis as a Model Organism for Assessing Interaction of Anaerobic Bacteria with Host Cells at JoVE.com

Porphyromonas gingivalis as a Model Organism for Assessing Interaction of Anaerobic Bacteria with Host Cells

This article presents two protocols: one to measure anaerobic bacteria that can successfully invade and survive within the host, and the other to visualize anaerobic bacteria interacting with host cells. This study can be applied to any cultivable anaerobe and any eukaryotic cell type.

Porphyromonas gingivalis as a Model Organism for Assessing Interaction of Anaerobic Bacteria with Host Cells

Anaerobic bacteria far outnumber aerobes in many human niches such as the gut, mouth, and vagina. Furthermore, anaerobic infections are common and ...

porphyromonas-gingivalis-as-model-organism-for-assessing-interaction

Research

JoVE Journal

Immunology and Infection

26.2K ビュー.  Virginia Commonwealth University. This article presents two protocols: one to measure anaerobic bacteria that can successfully invade and survive within the host, and the other to visualize anaerobic bacteria interacting with host cells. This study can be applied to any cultivable anaerobe and any eukaryotic cell type. 

ビデオ: Porphyromonas gingivalis as a Model Organism for Assessing Interaction of Anaerobic Bacteria with Host Cells

Dissecting Host-virus Interaction in Lytic Replication of a Model Herpesvirus

In response to viral infection, a host develops various defensive responses, such as activating innate immune signaling pathways that lead to antiviral cytokine production1,2. In order to colonize the host, viruses are obligate to evade host antiviral responses and manipulate signaling pathways. Unraveling the host-virus interaction will shed light on the development of novel therapeutic strategies against viral infection.
Murine &gamma;HV68 is closely related to human oncogenic Kaposi's sarcoma-associated herpesvirus and Epsten-Barr virus3,4. &gamma;HV68 infection in laboratory mice provides a tractable small animal model to examine the entire course of host responses and viral infection in vivo, which are not available for human herpesviruses. In this protocol, we present a panel of methods for phenotypic characterization and molecular dissection of host signaling components in &gamma;HV68 lytic replication both in vivo and ex vivo. The availability of genetically modified mouse strains permits the interrogation of the roles of host signaling pathways during &gamma;HV68 acute infection in vivo. Additionally, mouse embryonic fibroblasts (MEFs) isolated from these deficient mouse strains can be used to further dissect roles of these molecules during &gamma;HV68 lytic replication ex vivo.
Using virological and molecular biology assays, we can pinpoint the molecular mechanism of host-virus interactions and identify host and viral genes essential for viral lytic replication. Finally, a bacterial artificial chromosome (BAC) system facilitates the introduction of mutations into the viral factor(s) that specifically interrupt the host-virus interaction. Recombinant &gamma;HV68 carrying these mutations can be used to recapitulate the phenotypes of &gamma;HV68 lytic replication in MEFs deficient in key host signaling components. This protocol offers an excellent strategy to interrogate host-pathogen interaction at multiple levels of intervention in vivo and ex vivo.
Recently, we have discovered that &gamma;HV68 usurps an innate immune signaling pathway to promote viral lytic replication5. Specifically, &gamma;HV68 de novo infection activates the immune kinase IKK&beta; and activated IKK&beta; phosphorylates the master viral transcription factor, replication and transactivator (RTA), to promote viral transcriptional activation. In doing so, &gamma;HV68 efficiently couples its transcriptional activation to host innate immune activation, thereby facilitating viral transcription and lytic replication. This study provides an excellent example that can be applied to other viruses to interrogate host-virus interaction.

We describe a protocol to identify key roles of host signaling molecules in lytic replication of a model herpesvirus, gamma herpesvirus 68 (&gamma;HV68). Utilizing genetically modified mouse strains and embryonic fibroblasts for &gamma;HV68 lytic replication, the protocol permits both phenotypic characterization and molecular interrogation of virus-host interactions in viral lytic replication.

In response to viral infection, a host develops various defensive responses, such as activating innate immune signaling pathways that lead to antiviral ...

Introducing Shear Stress in the Study of Bacterial Adhesion

During bacterial infections a sequence of interactions occur between the pathogen and its host. Bacterial adhesion to the host cell surface is often the initial and determining step of the pathogenesis. Although experimentally adhesion is mostly studied in static conditions adhesion actually takes place in the presence of flowing liquid. First encounters between bacteria and their host often occur at the mucosal level, mouth, lung, gut, eye, etc. where mucus flows along the surface of epithelial cells. Later in infection, pathogens occasionally access the blood circulation causing life-threatening illnesses such as septicemia, sepsis and meningitis. A defining feature of these infections is the ability of these pathogens to interact with endothelial cells in presence of circulating blood. The presence of flowing liquid, mucus or blood for instance, determines adhesion because it generates a mechanical force on the pathogen. To characterize the effect of flowing liquid one usually refers to the notion of shear stress, which is the tangential force exerted per unit area by a fluid moving near a stationary wall, expressed in dynes/cm2. Intensities of shear stress vary widely according to the different vessels type, size, organ, location etc. (0-100 dynes/cm2). Circulation in capillaries can reach very low shear stress values and even temporarily stop during periods ranging between a few seconds to several minutes 1. On the other end of the spectrum shear stress in arterioles can reach 100 dynes/cm2 2. The impact of shear stress on different biological processes has been clearly demonstrated as for instance during the interaction of leukocytes with the endothelium 3. To take into account this mechanical parameter in the process of bacterial adhesion we took advantage of an experimental procedure based on the use of a disposable flow chamber 4. Host cells are grown in the flow chamber and fluorescent bacteria are introduced in the flow controlled by a syringe pump. We initially focused our investigations on the bacterial pathogen Neisseria meningitidis, a Gram-negative bacterium responsible for septicemia and meningitis. The procedure described here allowed us to study the impact of shear stress on the ability of the bacteria to: adhere to cells 1, to proliferate on the cell surface 5and to detach to colonize new sites 6 (Figure 1). Complementary technical information can be found in reference 7. Shear stress values presented here were chosen based on our previous experience1 and to represent values found in the literature. The protocol should be applicable to a wide range of pathogens with specific adjustments depending on the objectives of the study.

During the infection process, a key step is the adhesion of pathogens with host cells. In most instances this adhesion step occurs in the presence of mechanical stress generated by flowing liquid. We describe a technique that introduces shear stress as an important parameter in the study of bacterial adhesion.

During bacterial infections a sequence of interactions occur between the pathogen and its host. Bacterial adhesion to the host cell surface is often the ...

Use of the EpiAirway Model for Characterizing Long-term Host-pathogen Interactions

Nontypeable Haemophilus influenzae (NTHi) are human-adapted Gram-negative bacteria that can cause recurrent and chronic infections of the respiratory mucosa 1; 2. To study the mechanisms by which these organisms survive on and inside respiratory tissues, a model in which successful long-term co-culture of bacteria and human cells can be performed is required. We use primary human respiratory epithelial tissues raised to the air-liquid interface, the EpiAirway model (MatTek, Ashland, MA). These are non-immortalized, well-differentiated, 3-dimensional tissues that contain tight junctions, ciliated and nonciliated cells, goblet cells that produce mucin, and retain the ability to produce cytokines in response to infection. 
This biologically relevant in vitro model of the human upper airway can be used in a number of ways; the overall goal of this method is to perform long-term co-culture of EpiAirway tissues with NTHi and quantitate cell-associated and internalized bacteria over time. As well, mucin production and the cytokine profile of the infected co-cultures can be determined. This approach improves upon existing methods in that many current protocols use submerged monolayer or Transwell cultures of human cells, which are not capable of supporting bacterial infections over extended periods3. For example, if an organism can replicate in the overlying media, this can result in unacceptable levels of cytotoxicity and loss of host cells, arresting the experiment. The EpiAirway model allows characterization of long-term host-pathogen interactions. Further, since the source for the EpiAirway is normal human tracheo-bronchial cells rather than an immortalized line, each is an excellent representation of actual human upper respiratory tract tissue, both in structure and in function4.
For this method, the EpiAirway tissues are weaned off of anti-microbial and anti-fungal compounds for 2 days prior to delivery, and all procedures are performed under antibiotic-free conditions. This necessitates special considerations, since both bacteria and primary human tissues are used in the same biosafety cabinet, and are co-cultured for extended periods.

This method allows characterization of extended bacterial co-culture with EpiAirways, primary human respiratory epithelial tissue grown at the air-liquid interface, a biologically relevant in vitro model. The approach can be used with any microbe that is amenable to long-term co-culture.

Nontypeable Haemophilus influenzae  (NTHi) are human-adapted Gram-negative bacteria that can cause recurrent and chronic infections of the respiratory ...

Use of Image Cytometry for Quantification of Pathogenic Fungi in Association with Host Cells

Studies of the cellular pathogenesis mechanisms of pathogenic yeasts such as Candida albicans, Histoplasma capsulatum, and Cryptococcus neoformans commonly employ infection of mammalian hosts or host cells (i.e. macrophages) followed by yeast quantification using colony forming unit analysis or flow cytometry. While colony forming unit enumeration has been the most commonly used method in the field, this technique has disadvantages and limitations, including slow growth of some fungal species on solid media and low and/or variable plating efficiencies, which is of particular concern when comparing growth of wild-type and mutant strains. Flow cytometry can provide rapid quantitative information regarding yeast viability, however, adoption of flow cytometric detection for pathogenic yeasts has been limited for a number of practical reasons including its high cost and biosafety considerations. Here, we demonstrate an image-based cytometric methodology using the Cellometer Vision (Nexcelom Bioscience, LLC) for the quantification of viable pathogenic yeasts in co-culture with macrophages. Our studies focus on detection of two human fungal pathogens: Histoplasma capsulatum and Candida albicans. H. capsulatum colonizes alveolar macrophages by replicating within the macrophage phagosome, and here, we quantitatively assess the growth of H. capsulatum yeasts in RAW 264.7 macrophages using acridine orange/propidium iodide staining in combination with image cytometry. Our method faithfully recapitulates growth trends as measured by traditional colony forming unit enumeration, but with significantly increased sensitivity. Additionally, we directly assess infection of live macrophages with a GFP-expressing strain of C. albicans. Our methodology offers a rapid, accurate, and economical means for detection and quantification of important human fungal pathogens in association with host cells.

Here, we demonstrate how image cytometry can be used for quantification of pathogenic fungi in association with host cells in culture. This technique can be used as an alternative to CFU enumeration.

Studies of the cellular pathogenesis mechanisms of pathogenic yeasts such as Candida albicans, Histoplasma capsulatum, and Cryptococcus neoformans ...

Use of Galleria mellonella as a Model Organism to Study Legionella pneumophila Infection

Legionella pneumophila, the causative agent of a severe pneumonia named Legionnaires&#39; disease, is an important human pathogen that infects and replicates within alveolar macrophages. Its virulence depends on the Dot/Icm type IV secretion system (T4SS), which is essential to establish a replication permissive vacuole known as the Legionella containing vacuole (LCV). L. pneumophila infection can be modeled in mice however most mouse strains are not permissive, leading to the search for novel infection models. We have recently shown that the larvae of the wax moth Galleria mellonella are suitable for investigation of L. pneumophila infection. G. mellonella is increasingly used as an infection model for human pathogens and a good correlation exists between virulence of several bacterial species in the insect and in mammalian models. A key component of the larvae&#39;s immune defenses are hemocytes, professional phagocytes, which take up and destroy invaders. L. pneumophila is able to infect, form a LCV and replicate within these cells. Here we demonstrate protocols for analyzing L. pneumophila virulence in the G. mellonella model, including how to grow infectious L. pneumophila, pretreat the larvae with inhibitors, infect the larvae and how to extract infected cells for quantification and immunofluorescence microscopy. We also describe how to quantify bacterial replication and fitness in competition assays. These approaches allow for the rapid screening of mutants to determine factors important in L. pneumophila virulence, describing a new tool to aid our understanding of this complex pathogen.

Use of Galleria mellonella as a Model Organism to Study Legionella pneumophila Infection

The larva of the wax moth Galleria mellonella was recently established as an in vivo model to study Legionella pneumophila infection. Here, we demonstrate fundamental techniques to characterize the pathogenesis of Legionella in the larvae, including inoculation, measurement of bacterial virulence and replication as well as extraction and analysis of infected hemocytes.

Legionella pneumophila, the causative agent of a severe pneumonia named Legionnaires&#39; disease, is an important human pathogen that infects and ...

Studying Microbial Communities In Vivo: A Model of Host-mediated Interaction Between Candida Albicans and Pseudomonas Aeruginosa in the Airways

Studying host-pathogen interaction enables us to understand the underlying mechanisms of the pathogenicity during microbial infection. The prognosis of the host depends on the involvement of an adapted immune response against the pathogen1. Immune response is complex and results from interaction of the pathogens and several immune or non-immune cellular types2. In vitro studies cannot characterise these interactions and focus on cell-pathogen interactions. Moreover, in the airway3, particularly in patients with suppurative chronic lung disease or in mechanically ventilated patients, polymicrobial communities are present and complicate host-pathogen interaction. Pseudomonas aeruginosa and Candida albicans are both problem pathogens4, frequently isolated from tracheobronchial samples, and associated to severe infections, especially in intensive care unit5. Microbial interactions have been reported between these pathogens in vitro but the clinical impact of these interactions remains unclear6. To study the interactions between C. albicans and P. aeruginosa, a murine model of C. albicans airways colonization, followed by a P. aeruginosa-mediated acute lung infection was performed.

Studying Microbial Communities In Vivo: A Model of Host-mediated Interaction Between Candida Albicans and Pseudomonas Aeruginosa in the Airways

While in vitro study of host-pathogen interactions allow the characterization of specific immune responses, in vivo models are required to observe the effects of complex responses. Using Candida albicans exposure followed by Pseudomonas aeruginosa-mediated lung infection, we established a murine model of microbial interactions involved in ventilator-associated pneumonia pathogenicity.

Studying host-pathogen interaction enables us to understand the underlying mechanisms of the pathogenicity during microbial infection. The prognosis of ...

Biomimetic Materials to Characterize Bacteria-host Interactions

Bacterial attachment to host cells is one of the earliest events during bacterial colonization of host tissues and thus a key step during infection. The biochemical and functional characterization of adhesins mediating these initial bacteria-host interactions is often compromised by the presence of other bacterial factors, such as cell wall components or secreted molecules, which interfere with the analysis. This protocol describes the production and use of biomimetic materials, consisting of pure recombinant adhesins chemically coupled to commercially available, functionalized polystyrene beads, which have been used successfully to dissect the biochemical and functional interactions between individual bacterial adhesins and host cell receptors. Protocols for different coupling chemistries, allowing directional immobilization of recombinant adhesins on polymer scaffolds, and for assessment of the coupling efficiency of the resulting &#8220;bacteriomimetic&#8221; materials are also discussed. We further describe how these materials can be used as a tool to inhibit pathogen mediated cytotoxicity and discuss scope, limitations and further applications of this approach in studying bacterial - host interactions.

Bacterial attachment to host cells is a key step during host colonization and infection. This protocol describes the generation of polymer-coupled recombinant adhesins as biomimetic materials which allow analysis of the contribution of individual adhesins to these processes, independent of other bacterial factors.

Bacterial attachment to host cells is one of the earliest events during bacterial colonization of host tissues and thus a key step during infection. The ...

Experimental Infection with Listeria monocytogenes as a Model for Studying Host Interferon-&#947; Responses

L. monocytogenes is a gram-positive bacterium that is a cause of food borne disease in humans. Experimental infection of mice with this pathogen has been highly informative on the role of innate and adaptive immune cells and specific cytokines in host immunity against intracellular pathogens. Production of IFN-&#947; by innate cells during sublethal infection with L. monocytogenes is important for activating macrophages and early control of the pathogen1-3. In addition, IFN-&#947; production by adaptive memory lymphocytes is important for priming the activation of innate cells upon reinfection4. The L. monocytogenes infection model thus serves as a great tool for investigating whether new therapies that are designed to increase IFN-&#947; production have an impact on IFN-&#947; responses in vivo and have productive biological effects such as increasing bacterial clearance or improving mouse survival from infection. Described here is a basic protocol for how to conduct intraperitoneal infections of C57BL/6J mice with the EGD strain of L. monocytogenes and to measure IFN-&#947; production by NK cells, NKT cells, and adaptive lymphocytes by flow cytometry. In addition, procedures are described to: (1) grow and prepare the bacteria for inoculation, (2) measure bacterial load in the spleen and liver, and (3) measure animal survival to endpoints. Representative data are also provided to illustrate how this infection model can be used to test the effect of specific agents on IFN-&#947; responses to L. monocytogenes and survival of mice from this infection.

Experimental Infection with &lt;em&gt;Listeria monocytogenes&lt;/em&gt; as a Model for Studying Host Interferon-&amp;#947; Responses

This protocol describes how to inoculate C57BL/6J mice with the EGD strain of Listeria monocytogenes (L. monocytogenes) and to measure interferon-&#947; (IFN-&#947;) responses by natural killer (NK) cells, natural killer T (NKT) cells, and adaptive T lymphocytes post-infection. This protocol also describes how to conduct survival studies in mice after infection with a modified LD50 dose of the pathogen.

L. monocytogenes is a gram-positive bacterium that is a cause of food borne disease in humans. Experimental infection of mice with this pathogen has been ...

A Murine Model of Group B Streptococcus Vaginal Colonization

Streptococcus agalactiae (group B Streptococcus, GBS), is a Gram-positive, asymptomatic colonizer of the human gastrointestinal tract and vaginal tract of 10 - 30% of adults. In immune-compromised individuals, including neonates, pregnant women, and the elderly, GBS may switch to an invasive pathogen causing sepsis, arthritis, pneumonia, and meningitis. Because GBS is a leading bacterial pathogen of neonates, current prophylaxis is comprised of late gestation screening for GBS vaginal colonization and subsequent peripartum antibiotic treatment of GBS-positive mothers. Heavy GBS vaginal burden is a risk factor for both neonatal disease and colonization. Unfortunately, little is known about the host and bacterial factors that promote or permit GBS vaginal colonization. This protocol describes a technique for establishing persistent GBS vaginal colonization using a single &#946;-estradiol pre-treatment and daily sampling to determine bacterial load. It further details methods to administer additional therapies or reagents of interest and to collect vaginal lavage fluid and reproductive tract tissues. This mouse model will further the understanding of the GBS-host interaction within the vaginal environment, which will lead to potential therapeutic targets to control maternal vaginal colonization during pregnancy and to prevent transmission to the vulnerable newborn. It will also be of interest to increase our understanding of general bacterial-host interactions in the female vaginal tract.

A Murine Model of Group B Streptococcus Vaginal Colonization

The purpose of this protocol is to imitate human group B Streptococcus (GBS) vaginal colonization in a murine model. This method may be used to investigate host immune responses and bacterial factors contributing to GBS vaginal persistence, as well as to test therapeutic strategies.

Streptococcus agalactiae (group B Streptococcus, GBS), is a Gram-positive, asymptomatic colonizer of the human gastrointestinal tract and vaginal tract of ...

Arbovirus Infections As Screening Tools for the Identification of Viral Immunomodulators and Host Antiviral Factors

RNA interference- and genome editing-based screening platforms have been widely used to identify host cell factors that restrict virus replication. However, these screens are typically conducted in cells that are naturally permissive to the viral pathogen under study. Therefore, the robust replication of viruses in control conditions may limit the dynamic range of these screens. Furthermore, these screens may be unable to easily identify cellular defense pathways that restrict virus replication if the virus is well-adapted to the host and capable of countering antiviral defenses. In this article, we describe a new paradigm for exploring virus-host interactions through the use of screens that center on naturally abortive infections by arboviruses such as vesicular stomatitis virus (VSV). Despite the ability of VSV to replicate in a wide range of dipteran insect and mammalian hosts, VSV undergoes a post-entry, abortive infection in a variety of cell lines derived from lepidopteran insects, such as the gypsy moth (Lymantria dispar). However, these abortive VSV infections can be &#34;rescued&#34; when host cell antiviral defenses are compromised. We describe how VSV strains encoding convenient reporter genes and restrictive L. dispar cell lines can be paired to set-up screens to identify host factors involved in arbovirus restriction. Furthermore, we also show the utility of these screening tools in the identification of virally encoded factors that rescue VSV replication during coinfection or through ectopic expression, including those encoded by mammalian viruses. The natural restriction of VSV replication in L. dispar cells provides a high signal-to-noise ratio when screening for the conditions that promote VSV rescue, thus enabling the use of simplistic luminescence- and fluorescence-based assays to monitor the changes in VSV replication. These methodologies are valuable for understanding the interplay between host antiviral responses and viral immune evasion factors.

Here, we present the protocols to identify 1) virus-encoded immunomodulators that promote arbovirus replication and 2) eukaryotic host factors that restrict arbovirus replication. These fluorescence- and luminescence-based methods allow researchers to rapidly obtain quantitative readouts of arbovirus replication in simplistic assays with low signal-to-noise ratios.

RNA interference- and genome editing-based screening platforms have been widely used to identify host cell factors that restrict virus replication. ...