Name: 비디오: Video Bioinformatics Analysis of Human Embryonic Stem Cell Colony Growth
Uploaded: 2010-05-20T17:00:00.000+00:00
Duration: 13 min 11 s
Description: 12.7K 조회수. University of California. 비디오 생물 정보학은 자동 처리, 분석, 이해하고, 미세한 동영상에서 추출한 생물 spatio - 시간적 데이터의 데이터 마이닝이다. 이 문서의 목적은 비디오 생물 정보학 방법을 사용하여 인간의 배아 줄기 세포 콜로니 성장을 측정하는 방법을 설명하는 것입니다.

The development of this method was made possible by funding from the California Tobacco-Related Disease Research Program, the California Institute for Regenerative Medicine, and NSF IGERT grant on Video Bioinformatics (#0903667) at UCR (<a href="http://www.cris.ucr.edu/IGERT/index.php">http://www.cris.ucr.edu/IGERT/index.php</a>). Sabrina Lin is supported by a Dissertation Fellowship from the Graduate Division, Shawn Forteno is supported by an NIH MARC Fellowship, and Shruthi Satish is supported by a Graduate Division Fellowship. We are grateful to Anna Trtchounian for her help preparing the figures. We also thank Sam Alworth and Ned Jastromb for teaching us how to use the CL-Quant software.

Part 1: Experimental Procedure
Video data contain an abundance of information. However, this information is often difficult to extract and when done manually by humans and may require many hours of personnel time to complete. Manual analysis by humans is also subject to variation in interpretation and error. Video bioinformatics involves the use of computer software to mine specific data from video images. This method of analysis is rapid and can eliminate error that occurs when analysis is done manually by humans. The purpose of this article is to demonstrate a method for quantifying human embryonic stem cell colony growth using a video bioinformatics method.
In this paper, time lapse video images were collected using a Nikon BioStation CT incubation unit that allows multiple fields of cells to be imaged over time (Fig. 1). The methods described in this report are applicable to video data collected by any video microscopic set up.
In our experimental design, we plated H9 hESC in 12-well tissue culture plates for 48 hours. During this interval, colonies were allowed to fully attach and spread on Matrigel. Then, plates with attached hESC colonies were transferred to the BioStation CT and incubated for an additional 48 hours. While in the BioStation, images of the colonies were collected at 7 minute intervals and were later used to create time-lapse video sequences. Videos for each colony were then analyzed to quantify colony growth using video bioinformatics recipes developed with the CL-Quant software. The analyses done using recipes created with the CL-Quant software were checked for truthfulness manually using Adobe Photoshop.
Part 2: Preparation of attached hESC colonies
<ol>
 <li>Grow hESC on Matrigel coated 6-well plates, and once 70% confluency is reached, replate one well of the 6-well plate into 5 wells of a 12-well Matrigel coated plate as follows.</li>
 <li>Aspirate medium from a well containing hESC.</li>
 <li>Rinse well 2x with 1ml of PBS.</li>
 <li>Add 1ml of Accutase and incubate for 1 minute at 37&deg;C and 5% CO2.</li>
 <li>Add 10-12 glass beads into the well and shake the plate gently until colonies completely detach from the bottom of the well.</li>
 <li>Neutralize Accutase using 1ml of mTeSR medium or mEF conditioned medium.</li>
 <li>Centrifuge the cell suspension in a 15ml conical tube at 200g for 3 minutes.</li>
 <li>Decant the supernatant and the break pellet with 500&mu;l of fresh mTeSR medium.</li>
 <li>Plate drop wise 100&mu;l of the hESC suspension into each well in a 12-well plate.</li>
 <li>Rock plate back and forth gently and observe cultures under a light microscope. Make sure that cell clumps are evenly distributed throughout the plate.</li>
 <li>Place the 12-well plate back into the incubator.</li>
 <li>Allow hESC to attach and grow for 48 hours (a shorter time may be used).</li>
 <li>After 48 hours, decant the medium and wash wells with 500ul of PBS to remove unattached cells.</li>
 <li>Add 1ml of mTeSR medium to each well.</li>
 <li>Comment: Immediately place the plate into the incubator/microscope for video imaging.</li>
 <li>Begin collecting time-lapse images. Try to select fields with discrete single colonies that are not likely to grow into other colonies.</li>
 <li>Other methods for culturing and setting up hESC can be used in place of the above protocol.</li>
</ol>
Part 3: Video Bioinformatics
CL-Quant software was used to create three "recipes" that when run in sequence will determine the pixel number or area in microns for each colony over time. The three recipes are built in sequence and for this application include segmentation, enhancement, and measurement. 
Analyzing hESC colony growth using the CL-Quant software/recipe development:
<ol>
 <li>The segmentation recipe is created first.</li>
 <li>Scan the entire video to make sure that the video is usable. Check to be sure the entire colony remains in the field of view and that other colonies do not enter the field.</li>
 <li>Open the segmentation wizard and click the "next" button.</li>
 <li>Select the correct image channel (i.e., phase, green, red, etc) and click the "next" button.</li>
 <li>Pick "soft matching" out of the 3 choices and click "next".</li>
 <li>Select "want" regions by circling regions on the image typically the outer edge of the colony to the central area of the colony.
 <ul>
 <li>This area should be as small as possible but should be representative of the entire colony. </li>
 <li>When using phase contrast microscopy, be sure to include the halo around the colony for precise colony selection by the software.</li>
 <li>Pick 1 or 2 regions of interest that may show different pixel patterns within the colony, but do not pick too many "wants" which may result in inaccurate mask application.</li>
 </ul>
 </li>
 <li>Click the "next" button.</li>
 <li>Select "don't want" regions by circling regions on the image that are not part of the colony and not part of the background. These are regions that have patterns you wish to suppress and include pixels of artifacts such as debris and dead cells. Click "next".</li>
 <li>Select "background" by circling regions you wish to suppress.
 <ul>
 <li>The "don't want" and "background" regions differ in that background should be uniform and likely to show up in every frame.</li>
 <li>Typically we select the grey background around the colony.</li>
 </ul>
 </li>
 <li>Click the "next" button.</li>
 <li>A colored mask should be displayed over your region of interest (Fig 2A).</li>
 <li>If the mask does not accurately cover the region of interest, the segmentation threshold range (located at the bottom right hand corner of the software display) may be increased or decreased.</li>
 <li>The segmentation wizard prompts for further mask area fine tuning if necessary.</li>
 <li>If you wish to change your mask, select "update soft matching regions". This allows you to change the "want", "don't want", or "background" areas.</li>
 <li>If the mask is satisfactory, select "apply threshold and save my mask", and click the "next" button.</li>
 <li>The mask will then be displayed in a different color.</li>
 <li>Select "finish".</li>
 <li>The recipe should be displayed on the right upper corner of the software, and it should be called "segmentation recipe".</li>
 <li>Rename the recipe if you wish by right clicking and "rename".</li>
 <li>For spot checking, right click and place the mouse over "apply recipe".</li>
 <li>A menu will show that allows you to select the number of frames you wish use when spot checking the recipe. Run the recipe for every 10 frames to spot check the accuracy of mask placement.</li>
 <li>If the mask picks up parts of small unwanted regions or debris, you can create an "enhancement recipe" to improve fitting of the mask to the region of interest.</li>
 <li>To create an enhancement recipe, right click the "enhancement recipe" folder, and then click "new". A new enhancement recipe should be displayed.</li>
 <li>From the original field of view (FOV), click the "toggles enhancement module" button located to the right of the image. Mouse over icons in the toolbar to identify the correct one.</li>
 <li>Select "labeling" dropdown menu.</li>
 <li>Select "labeling 4 connected".</li>
 <li>Select "labeling 4 connected2".</li>
 <li>A new task bar should be displayed.</li>
 <li>Grab initial mask (mask0) from the segmentation recipe and drag it to the "input" box.</li>
 <li>The bar should now display "input mask #".</li>
 <li>Drag the icon with the "input mask #" to the mask 0 icon.</li>
 <li>Find "min size" in task bar and adjust number until only region of interest is displayed. Make sure you click on "execute" through each fitting trial.</li>
 <li>Once you are satisfied with your minimum size adjustment, click on the "enhancement recipe" you've created previously. (Fig. 2B)</li>
 <li>At the bottom of the screen, select "save to recipe".</li>
 <li>The software now prompts to "overwrite selected recipe?", select "yes"</li>
 <li>Spot check the enhancement recipe using the same procedures as above for spot checking segmentation.</li>
 <li>If satisfied with the segmentation and enhancement recipes, select 'create measurement template' on the right hand toolbar.</li>
 <li>Rename the template to if you wish.</li>
 <li>In the measurement template window, move cursor over clipart cell figure. Hold the Ctrl key and select the cell.</li>
 <li>Uncheck 'default parameter' and check 'area parameter' under 'morphology'.</li>
 <li>Exit 'template' window.</li>
 <li>Select the icon created in the measurement recipe.</li>
 <li>Rename the recipe.</li>
 <li>Move to and select 'template' tab in the upper right corner.</li>
 <li>Drag and drop your previously created measurement template onto the measurement window.</li>
 <li>Click 'Yes' to continue.</li>
 <li>In the measurement recipe window, select 'Channel mappings', then 'Whole cell'.</li>
 <li>Select 'Mask mappings'.</li>
 <li>Then select 'Whole cell' option for enhanced mask.</li>
 <li>Select the 'Measurement recipe' under the Recipe tab in the main window.</li>
 <li>Select the 'Save' icon within the Measurement recipe window.</li>
 <li>Then close the window.</li>
 <li>Now, close and reopen the 'FOV'.</li>
 <li>Right click the 'Recipe' icon, select 'Lock recipe list' and run the recipes sequentially on your video data.</li>
</ol>
Part 4: Checking recipe accuracy using the Photoshop software
In order to validate the recipe created with (CL-Quant software), the same data can be analyzed manually with Adobe Photoshop. For this analysis, every 10th frame (every 70 min time point) was analyzed to measure colony size over 48 hours.
<ol>
 <li>Open a frame of a colony image in Adobe Photoshop.</li>
 <li>Click on the Magic Wand Tool in the toolbar.</li>
 <li>Click on the area around the colony so the entire field is covered except the colony region.</li>
 <li>Click 'Edit in Quick Mask Mode' in the toolbar and click on the colony so the colony is selected.</li>
 <li>Make sure the dotted line around the colony fits right around the periphery of the colony and not inside it. If the dotted line is not around the periphery, change the tolerance value in the upper toolbar accordingly.</li>
 <li>Go to the 'Window' pull down menu and click 'Histogram'.</li>
 <li>Write down the pixel value when cache=1. If cache is 2, click the '!' to change to cache 1, and then note the pixel value.</li>
 <li>Repeat the above process for every 10th frame. Fewer total frames can be used if desired.</li>
 <li>Data collected using Photoshop and CL-Quant software can then be plotted together. If the CL-Quant recipes are truthful, the curves for the Photoshop and CL-Quant analysis should be very similar (Figs. 3-5).</li>
 <li>If the recipes developed with CL-Quant are truthful, they can be reliably applied to other video data.</li>
 <li>The value in using video bioinformatics in this analysis is that once the segmentation, enhancement, and measurement recipes are developed and validated, they will perform the analysis much more rapidly and more accurately than a human using Photoshop.</li>
</ol>
Representative Results
<img src="/files/ftp_upload/1933/1933fig1.jpg" alt="Figure 1" /> Figure 1: Film strip of a hESC colony showing frames at various times during 48 hours of growth in a BioStation CT. Frames were taken at 7 minute intervals.
<img src="/files/ftp_upload/1933/1933fig2.jpg" alt="Figure 2" /> Figure 2: (A) Image of a hESC with a mask placed on the colony by the segmentation recipe. Areas of debris and background are also masked indicating that an enhancement recipe is needed to improve the accuracy of the evaluation. (B) Image of the same colony as shown in "A" after enhancement has been performed. The mask now selects only the colony and noise has been eliminated from the selection.
<img src="/files/ftp_upload/1933/1933fig3.jpg" alt="Figure 3" /> Figure 3: Graph showing increase in colony size (in pixels) over 48 hours as determined using CL-Quant software and Photoshop. This graph plots the raw data and shows that colonies start at different sizes. It also shows that both methods of measurement are in good agreement.
<img src="/files/ftp_upload/1933/1933fig4.jpg" alt="Figure 4" /> Figure 4: Graph showing the same data as in Figure 3 after normalization to show the percent increase in colony size over 48 hours. This shows that growth rates are similar regardless of starting colony size and that both measures of analysis give similar results.
<img src="/files/ftp_upload/1933/1933fig5.jpg" alt="Figure 5" /> Figure 5: Graph showing the means for the normalized data in Figure 4. This graph clearly shows good agreement between the analyses done using video bioinformatics (CL-Quant software) and Photoshop and establishes that the recipe is truthful. The slight downturn in area for the Photoshop data at frame 325 is due to several videos not being included in the Photoshop analysis.

Video bioinformatics tools are powerful for rapidly extracting data from video images. Our protocol for quantifying hESC colony growth demonstrates one application of video bioinformatics to a biological problem. This method is quantitative and has the interesting feature of revealing data from individual hESC colonies. Video bioinformatics recipes can be developed to monitor other cellular processes such as proliferation, migration, apoptosis, and cell attachment to the substrate, and cell attachment to adjacent cells. ...

<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml" xml:lang="en" lang="en">	
		
		<div>
		<table border="1">
		<thead>
		<tr>
		<th>Material Name</th>
		<th>Type</th>
		<th>Company</th>
		<th>Catalogue Number</th>
		<th>Comment</th>
		</tr>
		</thead>
		<tbody>
		
<tr>
<td>mTeSR1 Human Embryonic Stem Cell Maintenance Medium</td>
<td>&nbsp;</td>
<td>Stem Cell Technologies</td>
<td>05850</td>
<td>or any suitable medium for hESC culture.</td>
</tr>
<tr>
<td>BD Matrigel</td>
<td>&nbsp;</td>
<td>BD Bioscience</td>
<td>356234</td>
<td>or other suitable substrate.</td>
</tr>
<tr>
<td>DMEM/F12 Basal Medium</td>
<td>&nbsp;</td>
<td>Invitrogen</td>
<td>11330-032</td>
<td>&nbsp;</td>
<tr>
<td>Phosphate Buffered Saline without Ca2+ and Mg2+</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<tr>
<td>Accutase Enzyme Cell Detachment Medium</td>
<td>&nbsp;</td>
<td>eBioscience</td>
<td>00-4555-56</td>
<td>or other suitable detachment enzyme.</td>
</tr>
<tr>
<td>3mm Glass beads</td>
<td>&nbsp;</td>
<td>Fisher Scientific</td>
<td>11-312A</td>
<td>optional.</td>
</tr>
<tr>
<td>12-well Tissue Culture Plates</td>
<td>&nbsp;</td>
<td>BD Falcon</td>
<td>353043</td>
<td>or any other plate format.</td>
</tr>
<tr>
<td>Nikon BioStation CT/IM</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>or other incubator/microscope suitable for collecting video data.</td>
</tr>
<tr>
<td>CL-Quant software (Nikon) and/or Photoshop (Adobe).</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>
<td>&nbsp;</td>		</tbody>
		</table>
		</div>

video bioinformatics analysis of human embryonic stem cell colony growth

Because video data are complex and are comprised of many images, mining information from video material is difficult to do without the aid of computer software.  Video bioinformatics is a powerful quantitative approach for extracting spatio-temporal data from video images using computer software to perform dating mining and analysis. In this article, we introduce a video bioinformatics method for quantifying the growth of human embryonic stem cells (hESC) by analyzing time-lapse videos collected in a Nikon BioStation CT incubator equipped with a camera for video imaging. In our experiments, hESC colonies that were attached to Matrigel were filmed for 48 hours in the BioStation CT.  To determine the rate of growth of these colonies, recipes were developed using CL-Quant software which enables users to extract various types of data from video images.  To accurately evaluate colony growth, three recipes were created. The first segmented the image into the colony and background, the second enhanced the image to define colonies throughout the video sequence accurately, and the third measured the number of pixels in the colony over time.  The three recipes were run in sequence on video data collected in a BioStation CT to analyze the rate of growth of individual hESC colonies over 48 hours. To verify the truthfulness of the CL-Quant recipes, the same data were analyzed manually using Adobe Photoshop software. When the data obtained using the CL-Quant recipes and Photoshop were compared, results were virtually identical, indicating the CL-Quant recipes were truthful. The method described here could be applied to any video data to measure growth rates of hESC or other cells that grow in colonies. In addition, other video bioinformatics recipes can be developed in the future for other cell processes such as migration, apoptosis, and cell adhesion.  

Watch this Scientific Journal Video about Video Bioinformatics Analysis of Human Embryonic Stem Cell Colony Growth at JoVE.com

Video Bioinformatics Analysis of Human Embryonic Stem Cell Colony Growth

Video bioinformatics is the automated processing, analysis, understanding, and data mining of biological spatio-temporal data extracted from microscopic videos. The purpose of this article is to demonstrate a method for measuring human embryonic stem cell colony growth using a video bioinformatics method.

Because video data are complex and are comprised of many images, mining information from video material is difficult to do without the aid of computer ...

video-bioinformatics-analysis-human-embryonic-stem-cell-colony

Research

JoVE Journal

Biology

12.7K 조회수.  University of California. 비디오 생물 정보학은 자동 처리, 분석, 이해하고, 미세한 동영상에서 추출한 생물 spatio - 시간적 데이터의 데이터 마이닝이다. 이 문서의 목적은 비디오 생물 정보학 방법을 사용하여 인간의 배아 줄기 세포 콜로니 성장을 측정하는 방법을 설명하는 것입니다.

비디오: Video Bioinformatics Analysis of Human Embryonic Stem Cell Colony Growth

Passaging HuES Human Embryonic Stem Cell-lines with Trypsin.

In this video we demonstrate how our lab routinely passages HuES human embryonic stem cell lines with trypsin.  Human embryonic stem cells are artifacts of cell culture, and tend to acquire karyotypic abnormalities with high population doublings.  Proper passaging is essential for maintaining a healthy, undifferentiated, karyotypically normal HuES human embryonic stem cell culture.  First, an expanding culture is washed in PBS to remove residual media and cell debris, then cells are overlaid with a minimal volume of warm 0.05% Trypsin-EDTA.  Trypsin is left on the cells for up to five minutes, then cells are gently dislodged with a 2mL serological pipette.  The cell suspension is collected and mixed with a large volume of HuES media, then cells are collected by gentle centrifugation.  The inactivated trypsin media mixture is removed, and cells resuspended in pre-warmed HuES media.  An appropriate split ratio is calculated (generally 1:10 to 1:20), and cells re-plated onto a 1-2 day old plate containing a monolayer of irradiated mouse embryonic fibroblast feeder cells.  The newly seeded HuES culture plate is left undisturbed for 48 hrs, then media is changed every day thereafter.  It is important not to trpsinize down to a single cell suspension, as this increases the risk of introducing karyotypic abnormalities.

In this video we demonstrate how our lab routinely passages HuES human embryonic stem cell lines with trypsin. Brought to you by JoVE.

In this video we demonstrate how our lab routinely passages HuES human embryonic stem cell lines with trypsin.  Human embryonic stem cells are artifacts ...

Propagation of Human Embryonic Stem (ES) Cells

Propagation of Human Embryonic Stem ES Cells

Derivation of Hematopoietic Stem Cells from Murine Embryonic Stem Cells

A stem cell is defined as a cell with the capacity to both self-renew and generate multiple differentiated progeny.  Embryonic stem cells (ESC) are derived from the blastocyst of the early embryo and are pluripotent in differentiative ability.  Their vast differentiative potential has made them the focus of much research centered on deducing how to coax them to generate clinically useful cell types.  The successful derivation of hematopoietic stem cells (HSC) from mouse ESC has recently been accomplished and can be visualized in this video protocol.  HSC, arguably the most clinically exploited cell population, are used to treat a myriad of hematopoietic malignancies and disorders.  However, many patients that might benefit from HSC therapy lack access to suitable donors.  ESC could provide an alternative source of HSC for these patients.  The following protocol establishes a baseline from which ESC-HSC can be studied and inform efforts to isolate HSC from human ESC.  In this protocol, ESC are differentiated as embryoid bodies (EBs) for 6 days in commercially available serum pre-screened for optimal hematopoietic differentiation.  EBs are then dissociated and infected with retroviral HoxB4.  Infected EB-derived cells are plated on OP9 stroma, a bone marrow stromal cell line derived from the calvaria of  M-CSF-/- mice, and co-cultured in the presence of hematopoiesis promoting cytokines for ten days.  During this co-culture, the infected cells expand greatly, resulting in the generation a heterogeneous pool of 100s of millions of cells.  These cells can then be used to rescue and reconstitute lethally irradiated mice.

This protocol details the derivation of transplantable hematopoietic stem cells from mouse embryonic stem cells (ESC) and their subsequent injection into lethally irradiated recipient mice. Briefly, ESC are differentiated as embryoid bodies, which are then infected with retroviral HoxB4 and co-cultured with OP9 stromal cells and hematopoietic cytokines.

A stem cell is defined as a cell with the capacity to both self-renew and generate multiple differentiated progeny.  Embryonic stem cells (ESC) are ...

Derivation of Human Embryonic Stem Cells by Immunosurgery

The ability of human embryonic stem cells to self-renew and differentiate into all cell types of 
the body suggests that they hold great promise for both medical applications and as a research 
tool for addressing fundamental questions in development and disease. Here, we provide a 
concise, step-by-step protocol for the derivation of human embryonic stem cells from embryos 
by immunosurgical isolation of the inner cell mass. 


The ability of human embryonic stem cells to self-renew and differentiate into all cell types of 
the body suggests that they hold great promise for both medical applications and as a research 
tool for addressing fundamental questions in development and disease. Here, we provide a 
concise, step-by-step protocol for the derivation of human embryonic stem cells from embryos 
by immunosurgical isolation of the inner cell mass.

The ability of human embryonic stem cells to self-renew and differentiate into all cell types of 
the body suggests that they hold great promise for both ...

Chromatin Immunoprecipitation from Human Embryonic Stem Cells

The functional and structural complexity of the myriad of cells in metazoan organisms arises from a small number of stem cells. Stem cells are characterized by two fundamental properties: self-renewal and multipotency that allows a stem cell to differentiate into virtually any cell type 1. The progression stem cell to differentiated cell is characterized by loss of multipotency, structural and morphological changes and the hierarchic activity of transcription factors and signaling molecules, whose activities establish and maintain cell-type specific gene expression patterns. At the molecular level, cell differentiation involves dynamic changes of the structure and composition of chromatin and the detection of those dynamic changes can provide valuable insights into the functional features of stem cells and the cell differentiation process 2,3. Chromatin is a highly compacted DNA-protein complex that forms when cells package chromosomal DNA with proteins, mainly histones 4. Stemcellness and cell differentiation has been correlated with the presence of specific arrays of regulatory proteins such as epigenetic factors, histone variants, and transcription factors 2,3,5.
 Chromatin immunoprecipitation (ChIP) provides a valuable method to monitor the presence of RNA, proteins, and protein modifications in chromatin 6,7. The comparison of chromatin from different cell types can elucidate dynamic changes in protein-chromatin associations that occur during cell differentiation.
Chromatin immunoprecipitation involves the purification of in vivo cross-linked chromatin. The isolated chromatin is reduced to smaller fragments by enzymatic digestion or mechanical force. Chromatin fragments are precipitated using specific antibodies to target proteins or protein and DNA modifications. The precipitated DNA or RNA is purified and used as a template for PCR or DNA microarray based assays. Prerequisites for a successful ChIP are high quality antibodies to the desired antigen and the availability of chromatin from control cells that do not express the target molecule. ChIP can correlate the presence of proteins, protein and RNA modifications, and RNA with specific target DNA, and depending on the choice of outread tool, detects the association of target molecules at specific target genes or in the context of an entire genome. The comparison of the distribution of proteins in the chromatin of differentiating cells can elucidate the dynamic changes of chromatin composition that coincide with the progression of cells along a cell lineage.

The differentiation of ESC coincides with cell-type specific changes in the structure and composition of chromatin. The detection of those changes provides valuable insights into the mechanisms that define stemcellness and cell differentiation. Chromatin immunoprecipitation (ChIP) represents a valuable method to dissect the molecular mechanisms underlying stem cell differentiation.

The functional and structural complexity of the myriad of cells in metazoan organisms arises from a small number of stem cells. Stem cells are ...

Culture and Maintenance of Human Embryonic Stem Cells  

Human embryonic stem (hES) cells must be monitored and cared for in order to maintain healthy, undifferentiated cultures. At minimum, the cultures must be  fed  every day by performing a complete medium change to replenish lost nutrients and to keep the cultures free of unwanted differentiation factors. Although a small amount of differentiation is normal and expected in stem cell cultures, the culture should be routinely cleaned up by manually removing, or "picking" differentiated areas. Identifying and removing excess differentiation from hES cell cultures are essential techniques in the maintenance of a healthy population of cells.

Culture and Maintenance of Human Embryonic Stem Cells

This protocol demonstrates how to maintain healthy, undifferentiated human embryonic stem (ES) cells.

Human embryonic stem (hES) cells must be monitored and cared for in order to maintain healthy, undifferentiated cultures. At minimum, the cultures must be ...

Isolation and Large Scale Expansion of Adult Human Endothelial Colony Forming Progenitor Cells

This paper introduces a novel recovery strategy for endothelial colony forming progenitor cells (ECFCs) from heparinized but otherwise unmanipulated adult human peripheral blood within a mean of 12 days. After large scale expansion &gt;1x108 ECFCs can be obtained for further tests. Advantageously by using pHPL the contact of human cells with bovine serum antigens can be excluded. By flow cytometry and immunohistochemistry the isolated cells can be characterized as ECFC and their in vitro functionality to form vascular like structures can be tested in a matrigel assay. Further these cells can be subcutaneously injected in a mouse model to form functional, perfused vessels in vivo. After long term expansion and cryopreservation proliferation, function and genomic stability appear to be preserved. 3,4
This animal-protein free isolation and expansion method is easily applicable to generate a large quantity of ECFCs.

Endothelial colony forming progenitor cells (ECFCs) are a promising tool to study vascular homeostasis and repair.1,2 This paper introduces a novel animal-serum free method for isolation and expansion of ECFC from heparinised adult human peripheral blood with pooled human platelet lysate (pHPL) diminishing the risk of anti-bovine immunisation.

This paper introduces a novel recovery strategy for endothelial colony forming progenitor cells (ECFCs) from heparinized but otherwise unmanipulated adult ...

Isolation and Animal Serum Free Expansion of Human Umbilical Cord Derived Mesenchymal Stromal Cells (MSCs) and Endothelial Colony Forming Progenitor Cells (ECFCs)

The umbilical cord is a rich source for progenitor cells with high proliferative potential including mesenchymal stromal cells (also termed mesenchymal stem cells, MSCs) and endothelial colony forming progenitor cells (ECFCs). Both cell types are key players in maintaining the integrity of tissue and are probably also involved in regenerative processes and tumor formation.
To study their biology and function in a comparative manner it is important to have both cells types available from the same donor. It may also be beneficial for regenerative purposes to derive MSCs and ECFCs from the same tissue.
Because cellular therapeutics should eventually find their way from bench to bedside we established a new method to isolate and further expand progenitor cells without the use of animal protein. Pooled human platelet lysate (pHPL) replaced fetal bovine serum in all steps of our protocol to completely avoid contact of the cells to xenogeneic proteins.
This video demonstrates a methodology for the isolation and expansion of progenitor cells from one umbilical cord.
All materials and procedures will be described.

Isolation and Animal Serum Free Expansion of Human Umbilical Cord Derived Mesenchymal Stromal Cells MSCs and Endothelial Colony Forming Progenitor Cells ECFCs

This protocol describes the isolation and subsequent expansion of mesenchymal stromal cells and endothelial colony forming cells without the use of animal serum to generate autologous pairs for experimental transplantation purposes.

The umbilical cord is a rich source for progenitor cells with high proliferative potential including mesenchymal stromal cells (also termed mesenchymal ...

Freezing and Thawing Human Embryonic Stem Cells

Since James Thomson et al developed a technique in 1998 to isolate and grow hES in culture, freezing cells for later use and thawing and expanding cells from a frozen stock have become important procedures performed in routine hES cell culture. Since hES cells are very sensitive to the stresses of freezing and thawing, special care must taken. Here we demonstrate the proper technique for rapidly thawing hES cells from liquid nitrogen stocks, plating them on mouse embryonic feeder cells, and slowly freezing them for long-term storage.

Since James Thomson et al developed a technique in 1998 to isolate and grow hES in culture, freezing cells for later use and thawing and expanding cells from a frozen stock have become important procedures performed in routine hES cell culture. Since hES cells are very sensitive to the stresses of freezing and thawing, special care must taken. Here we demonstrate the proper technique for rapidly thawing hES cells from liquid nitrogen stocks, plating them on mouse embryonic feeder cells, and slowly freezing them for long-term storage.

Since James Thomson et al developed a technique in 1998 to isolate and grow hES in culture, freezing cells for later use and thawing and expanding cells ...

Differentiation of Embryonic Stem Cells into Oligodendrocyte Precursors

Oligodendrocytes are the myelinating cells of the central nervous system. For regenerative cell therapy in demyelinating diseases, there is significant interest in deriving a pure population of lineage-committed oligodendrocyte precursor cells (OPCs) for transplantation. OPCs are characterized by the activity of the transcription factor Olig2 and surface expression of a proteoglycan NG2. Using the GFP-Olig2 (G-Olig2) mouse embryonic stem cell (mESC) reporter line, we optimized conditions for the differentiation of mESCs into GFP+Olig2+NG2+ OPCs. In our protocol, we first describe the generation of embryoid bodies (EBs) from mESCs. Second, we describe treatment of mESC-derived EBs with small molecules: (1) retinoic acid (RA) and (2) a sonic hedgehog (Shh) agonist purmorphamine (Pur) under defined culture conditions to direct EB differentiation into the oligodendroglial lineage. By this approach, OPCs can be obtained with high efficiency (&gt;80%) in a time period of 30 days. Cells derived from mESCs in this protocol are phenotypically similar to OPCs derived from primary tissue culture. The mESC-derived OPCs do not show the spiking property described for a subpopulation of brain OPCs in situ. To study this electrophysiological property, we describe the generation of spiking mESC-derived OPCs by ectopically expressing NaV1.2 subunit. The spiking and nonspiking cells obtained from this protocol will help advance functional studies on the two subpopulations of OPCs.

We describe a small molecule-based protocol for differentiation of mouse embryonic stem cells into oligodendrocyte precursor cells (OPCs). This protocol generates Olig2+NG2+ OPCs with high efficiency by 30 days of differentiation. We also describe a method to generate "spiking" OPCs that can fire action potentials.

Oligodendrocytes are the myelinating cells of the central nervous system. For regenerative cell therapy in demyelinating diseases, there is significant ...