Funded by Sigma-Aldrich

1. Mycoplasma Detection
<ol>
	<li>Cell culture supernatants can be tested directly or the sample can prepared for use at a later date. To prepare for later use place 100 &mu;l of supernatant in a sterile amplification tube and incubate at 95&deg; C for 5 minutes. Once this is complete the sample can be stored at 2-8&deg; C for up to one week. Just prior to running the sample briefly centrifuge (5 seconds) to pellet any cellular debris.</li>
	<li>To prepare the samples for PCR, determine the total volume of Jumpstart Taq DNA polymerase/rehydration buffer required for the reactions. We will be preparing 5 total reactions. Five reactions will require 2.5&mu;l of Taq and 114.5&mu;l of rehydration buffer. This will contain a minimum of one unit of Taq per reaction and 22.5&mu;l of rehydration buffer per sample reaction and negative control plus 24.5&mu;l of rehydration buffer for the positive control. 1 unit of DNA polymerase per reaction should be added to the appropriate volume of rehydration buffer. This will vary with the Taq used.</li>
	<li>Place the calculated volume of Taq DNA polymerase into a clean microcentrifuge tube and follow with the calculated volume of rehydration buffer. The DNA polymerase/rehydration buffer should be mixed gently by flicking the tube. This mixture should not be vortexed.</li>
	<li>To prepare the negative control and samples use the transparent reaction tubes provided in the kit. The reaction tubes provided in the kit already contain the nuclueotides, primers and internal control DNA. 23 &mu;l of Jumpstart Taq DNA Polymerase/Rehydration buffer mix, as prepared in the previous steps, should be placed in each of the negative control and sample tubes. Add 2 &mu;l of DNA free water to the negative control and add 2 &mu;l of the sample to each of the sample tubes and label. Mix the contents by flicking the tubes. Contents should not be vortexed.</li>
	<li>To prepare the positive control use the pink reaction tubes provided in the kit. The reaction tubes provided in the kit already contain the nuclueotides, primers and internal control DNA. Add 25 &mu;l of Jumpstart Taq DNA polymerase/Rehydration buffer mix, as prepared in the previous steps, to the reaction tubes and label. Mix the contents by flicking the tubes. Contents should not be vortexed. Incubate the negative control, positive control and sample tubes at room temperature for 5 minutes.</li>
	<li>For the PCR to take place the samples need to be placed in a thermal cycler. When using JumpStart Taq an activation step is not required. Place the reaction tubes in the thermal cycler. The cycles should be set as follows: 94&deg;C for 30 seconds, 55&deg;C for 30 seconds and 72&deg;C for 40 seconds. These cycles will be run 40 times.</li>
	<li>Once the PCR cycles have completed the samples should be cooled to 4-8&deg;C by removing them from the thermal cycler and placing them in ice. When the samples have cooled they should be loaded onto the agarose gel for electrophoresis. Loading gel and dye are not necessary as they are already present in the reaction tubes. Directly load 8 &mu;l for each PCR into a separate lane. Stop the electrophoresis after migration of 2.5 - 3.0 cm.</li>
</ol>
2. Representative Results
The negative control should show a band at approximately 481 bp. This can be seen in the negative control column on the electrophoresis gel that is shown at the beginning of the video. The absence of the negative control band at 481 bp is a good indicator that the activity of the polymerase was not sufficienttaq used was not sensitive enough.
Mycoplasma positive samples will show bands in the range of 270 &plusmn; 8 bp. The band will be heavy for highly contaminated samples and faint for lightly contaminated samples. The variations in intensity can be seen in the positive sample columns on the electrophoresis gel that is shown at the beginning of the video. All samples contain an internal negative control to demonstrate that the PCR occurred as expected. It is normal to see the absence of the internal control on highly contaminated samples.
If there is not a band in the positive range or a band in the negative range on your sample this is a good indicator that your samples are inhibited. If the sample is inhibited the PCR inhibitors can be removed by performing a DNA extraction.
<img alt="Figure 1" src="/files/ftp_upload/3057/3057fig1.jpg" /> 
Figure 1. Relevant Amplicon bands: Results of detecting mycoplasma by PCR are shown. Lane 2 is the negative control, which should show a band at approximately 481 bp. The absence of the negative control band at 481 bp is a good indicator that the taq used was not sensitive enough. Mycoplasma-positive samples will show bands in the range of 270 + 8 bp as shown in lanes 3 - 6. The band will be heavy for highly contaminated samples (lane 6) and faint for lightly contaminated samples (lane 4). All samples contain an internal negative control (481 bp) to demonstrate that the PCR occurred as expected. It is normal to see the absence of the internal control on highly contaminated samples.

<ol>
	<li>Wirth, M., Hauser, H., Drexler, H. G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Specificity+and+Sensitivity+of+Polymerase+Chain+Reaction+(PCR)+in+Comparison+with+Other+Methods+for+the+Detection+of+Mycoplasma+Contamination+in+Cell+Lines.">Specificity and Sensitivity of Polymerase Chain Reaction (PCR) in Comparison with Other Methods for the Detection of Mycoplasma Contamination in Cell Lines.</a> Journal of Immunological Methods. 164, 91-100 (1993).</li><li>Kong, H., Volokhov, D. V., George, J., Ikonomi, P., Chandler, D., Anderson, C., Chizhikov, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Amplification+of+Cell+Culture+Enrichment+for+Improving+the+Sensitivity+of+Mycoplasma+Detection+Methods+Based+on+Nucleic+Acid+Amplification+Technology+(NAT).">Amplification of Cell Culture Enrichment for Improving the Sensitivity of Mycoplasma Detection Methods Based on Nucleic Acid Amplification Technology (NAT).</a> Applied Microbiology and Biotechnology. 77, 223-232 (2007).</li><li>Volokhov, D. V., Graham, L. J., Borson, K. A., Chizhikov, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mycoplasma+Testing+of+Cell+Substrates+and+Biologics:+Review+of+Alternative+Non-Microbiological+Techniques.">Mycoplasma Testing of Cell Substrates and Biologics: Review of Alternative Non-Microbiological Techniques.</a> Molecular and Cellular Probes. , (2011).</li></ol>

The authors are employees of Sigma-Aldrich that produced reagents and tools used in this article.

Because of the extreme sensitivity of the kit, when performed correctly the kit should yield precise results indicating whether or not your sample has mycoplasma contamination. The kit has been optimized for use with JumpStart Taq DNA Polymerase. Other taqs may be used when preparing the samples but the internal control band at 481 bp should be present to indicate proper sensitivity of the alternative taq. It is possible for the positive bands to exhibit various densities depending on the level of contamination. It is possible to observe the absence of the internal control band on heavily contaminated samples. Using caution and proper technique when preparing the samples to prevent contamination are crucial for proper. detection when using the LookOut Mycoplasma PCR Detection Kit.

<table border="1">
	<tbody>
		<tr>
			<th>
				Name of the reagent</th>
			<th>
				Company</th>
			<th>
				Catalogue number</th>
			<th>
				Comments (optional)</th>
		</tr>
		<tr>
			<td><a href="http://www.sigmaaldrich.com/catalog/ProductDetail.do?lang=en&N4=MP0035|SIGMA&N5=SEARCH_CONCAT_PNO|BRAND_KEY&F=SPEC&cm_mmc=JoVE-_-products-_-mycoplasma-_-MP0035&cm_sp=affiliate-_-Jove-_-12346">LookOut Mycoplasma PCR Detection Kit</a></td>
			<td>Sigma-Aldrich</td>
			<td>MP0035</td>
			<td></td>
		</tr>
		<tr>
			<td><a href="http://www.sigmaaldrich.com/catalog/ProductDetail.do?lang=en&N4=D9307|SIGMA&N5=SEARCH_CONCAT_PNO|BRAND_KEY&F=SPEC&cm_mmc=JoVE-_-products-_-mycoplasma-_-D9307&cm_sp=affiliate-_-Jove-_-12347">JumpStart Taq DNA Polymerase</a></td>
			<td>Sigma-Aldrich</td>
			<td>D9307</td>
			<td></td>
		</tr>
		<tr>
			<td><a href="http://www.sigmaaldrich.com/catalog/ProductDetail.do?lang=en&N4=MP0030|SIGMA&N5=SEARCH_CONCAT_PNO|BRAND_KEY&F=SPEC&cm_mmc=JoVE-_-products-_-mycoplasma-_-MP0030&cm_sp=affiliate-_-Jove-_-12348">GenElute Blood Genomic DNA kit</a></td>
			<td>Sigma-Aldrich</td>
			<td>MP0030</td>
			<td></td>
		</tr>
		<tr>
			<td><a href="http://www.sigmaaldrich.com/catalog/ProductDetail.do?lang=en&N4=T0447|SIGMA&N5=SEARCH_CONCAT_PNO|BRAND_KEY&F=SPEC&cm_mmc=JoVE-_-products-_-mycoplasma-_-T0447&cm_sp=affiliate-_-Jove-_-12349">Nunc amplification tubes</a></td>
			<td>Sigma-Aldrich</td>
			<td>T0447</td>
			<td></td>
		</tr>
	</tbody>
</table>

optimized pcr-based detection of mycoplasma

The maintenance of contamination-free cell lines is essential to cell-based research. Among the biggest contaminant concerns are mycoplasma contamination. Although mycoplasma do not usually kill contaminated cells, they are difficult to detect and can cause a variety of effects on cultured cells, including altered metabolism, slowed proliferation and chromosomal aberrations. In short, mycoplasma contamination compromises the value of those cell lines in providing accurate data for life science research.
The sources of mycoplasma contamination in the laboratory are very challenging to completely control. As certain mycoplasma species are found on human skin, they can be introduced through poor aseptic technique. Additionally, they can come from contaminated supplements such as fetal bovine serum, and most importantly from other contaminated cell cultures. Once mycoplasma contaminates a culture, it can quickly spread to contaminate other areas of the lab. Strict adherence to good laboratory practices such as good aseptic technique are key, and routine testing for mycoplasma is highly recommended for successful control of mycoplasma contamination.
PCR-based detection of mycoplasma has become a very popular method for routine cell line maintenance. PCR-based detection methods are highly sensitive and can provide rapid results, which allows researchers to respond quickly to isolate and eliminate contamination once it is detected in comparison to the time required using microbiological techniques. The LookOut Mycoplasma PCR Detection Kit is highly sensitive, with a detection limit of only 2 genomes per &mu;l. Taking advantage of the highly specific JumpStart Taq DNA Polymerase and a proprietary primer design, false positives are greatly reduced. The convenient 8-tube format, strips pre-coated with dNTPs, and associated primers helps increase the throughput to meet the needs of customers with larger collections of cell lines.
Given the extreme sensitivity of the kit, great care must be taken to prevent inadvertent contamination of samples and reagents. The step-by-step protocol we demonstrate highlights the precautions and practices required for reliable mycoplasma detection. We also show and discuss typical results and their interpretation. Our goal is to ensure the success of researchers using the LookOut Mycoplasma PCR Detection Kit.

Watch this Scientific Journal Video about Optimized PCR-based Detection of Mycoplasma at JoVE.com

Optimized PCR-based Detection of Mycoplasma

The LookOut Mycoplasma PCR Detection Kit utilizes the polymerase chain reaction (PCR), which is established as the method of choice for highest sensitivity in the detection of Mycoplasma, Acholeplasma, and Ureaplasma contamination in cell cultures and other cell culture derived biologicals.

The maintenance of contamination-free cell lines is essential to cell-based research. Among the biggest contaminant concerns are mycoplasma contamination. ...

optimized-pcr-based-detection-of-mycoplasma

Research

JoVE Journal

Biology

53.5K Views.  Sigma-Aldrich. LookOut Mycoplasma ПЦР Kit используется полимеразная цепная реакция (ПЦР), которая устанавливается как метод выбора при высокой чувствительности обнаружения микоплазма, Acholeplasma и Ureaplasma загрязнения в культурах клеток и других клеточных культур производным биологическ?...

Video: Optimized PCR-based Detection of Mycoplasma

Optimized Fibrin Gel Bead Assay for the Study of Angiogenesis

Angiogenesis is a complex multi-step process, where, in response to angiogenic stimuli, new vessels are created from the existing vasculature.  These steps include: degradation of the basement membrane, proliferation and migration (sprouting) of endothelial cells (EC) into the extracellular matrix, alignment of EC into cords, branching, lumen formation, anastomosis, and formation of a new basement membrane.  Many in vitro assays have been developed to study this process, but most only mimic certain stages of angiogenesis, and morphologically the vessels within the assays often do not resemble vessels in vivo.  Based on earlier work by Nehls and Drenckhahn, we have optimized an in vitro angiogenesis assay that utilizes human umbilical vein EC and fibroblasts.  This model recapitulates all of the key early stages of angiogenesis and, importantly, the vessels display patent intercellular lumens surrounded by polarized EC. EC are coated onto cytodex microcarriers and embedded into a fibrin gel.  Fibroblasts are layered on top of the gel where they provide necessary soluble factors that promote EC sprouting from the surface of the beads.  After several days, numerous vessels are present that can easily be observed under phase-contrast and time-lapse microscopy. This video demonstrates the key steps in setting up these cultures.

This video demonstrates the protocol of an in vitro angiogenesis assay that recapitulates several stages of angiogenesis. Time-lapse images of sprouting, lumen formation, branching and anastomosis - key features of angiogenesis - are shown.

Angiogenesis is a complex multi-step process, where, in response to angiogenic stimuli, new vessels are created from the existing vasculature.  These ...

Detection of Protein Ubiquitination

Ubiquitination, the covalent attachment of the polypeptide ubiquitin to target proteins, is a key posttranslational modification carried out by a set of three enzymes. They include ubiquitin-activating enzyme E1, ubiquitin-conjugating enzyme E2, and ubiquitin ligase E3. Unlike to E1 and E2, E3 ubiquitin ligases display substrate specificity. On the other hand, numerous deubiquitylating enzymes have roles in processing polyubiquitinated proteins. Ubiquitination can result in change of protein stability, cellular localization, and biological activity. Mutations of genes involved in the ubiquitination/deubiquitination pathway or altered ubiquitin system function are associated with many different human diseases such as various types of cancer, neurodegeneration, and metabolic disorders. The detection of altered or normal ubiquitination of target proteins may provide a better understanding on the pathogenesis of these diseases. &nbsp;Here, we describe protocols to detect protein ubiquitination in cultured cells in vivo and test tubes in vitro. These protocols are also useful to detect other ubiquitin-like small molecule modification such as sumolyation and neddylation.

Ubiquitination is a key posttranslational modification carried out by a set of three enzymes. Mutations of genes involved in this modification are associated with many different human diseases. Here, we describe protocols to detect protein ubiquitination in cultured cells in vivo and test tubes in vitro.

Ubiquitination, the covalent attachment of the polypeptide ubiquitin to target proteins, is a key posttranslational modification carried out by a set of ...

Detection of Functional Matrix Metalloproteinases by Zymography

Matrix metalloproteinases (MMPs) are zinc-containing endopeptidases. They degrade proteins by cleavage of peptide bonds. More than twenty MMPs have been identified and are separated into six groups based on their structure and substrate specificity (collagenases, gelatinases, membrane type [MT-MMP], stromelysins, matrilysins, and others). MMPs play a critical role in cell invasion, cartilage degradation, tissue remodeling, wound healing, and embryogenesis. They therefore participate in both normal processes and in the pathogenesis of many diseases, such as rheumatoid arthritis, cancer, or chronic obstructive pulmonary disease1-6. Here, we will focus on MMP-2 (gelatinase A, type IV collagenase), a widely expressed MMP. We will demonstrate how to detect MMP-2 in cell culture supernatants by zymography, a commonly used, simple, and yet very sensitive technique first described in 1980 by C. Heussen and E.B. Dowdle7-10. This technique is semi-quantitative, it can therefore be used to determine MMP levels in test samples when known concentrations of recombinant MMP are loaded on the same gel11.
Solutions containing MMPs (e.g. cell culture supernatants, urine, or serum) are loaded onto a polyacrylamide gel containing sodium dodecyl sulfate (SDS; to linearize the proteins) and gelatin (substrate for MMP-2). The sample buffer is designed to increase sample viscosity (to facilitate gel loading), provide a tracking dye (bromophenol blue; to monitor sample migration), provide denaturing molecules (to linearize proteins), and control the pH of the sample. Proteins are then allowed to migrate under an electric current in a running buffer designed to provide a constant migration rate. The distance of migration is inversely correlated with the molecular weight of the protein (small proteins move faster through the gel than large proteins do and therefore migrate further down the gel). After migration, the gel is placed in a renaturing buffer to allow proteins to regain their tertiary structure, necessary for enzymatic activity. The gel is then placed in a developing buffer designed to allow the protease to digest its substrate. The developing buffer also contains p-aminophenylmercuric acetate (APMA) to activate the non-proteolytic pro-MMPs into active MMPs. The next step consists of staining the substrate (gelatin in our example). After washing the excess dye off the gel, areas of protease digestion appear as clear bands. The clearer the band, the more concentrated the protease it contains. Band staining intensity can then be determined by densitometry, using a software such as ImageJ, allowing for sample comparison.

This protocol describes an activity-based assay for detecting matrix metalloproteinases in culture supernatants or body fluids.

Matrix metalloproteinases (MMPs) are zinc-containing endopeptidases. They degrade proteins by cleavage of peptide bonds. More than twenty MMPs have been ...

An Optimized Protocol for Rearing Fopius arisanus, a Parasitoid of Tephritid Fruit Flies

Fopius arisanus (Sonan) is an important parasitoid of Tephritid fruit flies for at least two reasons. First, it is the one of only three opiine parasitoids known to infect the host during the egg stage1. Second, it has a wide range of potential fruit fly hosts. Perhaps due to its life history, F. arisanus has been a successfully used for biological control of fruit flies in multiple tropical regions2-4. One impediment to the wide use of F. arisanus for fruit fly control is that it is difficult to establish a stable laboratory colony5-9. Despite this difficulty, in the 1990s USDA researchers developed a reliable method to maintain laboratory populations of F. arisanus10-12. There is significant interest in F. arisanus biology13,14, especially regarding its ability to colonize a wide variety of Tephritid hosts14-17; interest is especially driven by the alarming spread of Bactrocera fruit fly pests to new continents in the last decade18. Further research on F. arisanus and additional deployments of this species as a biological control agent will benefit from optimizations and improvements of rearing methods. In this protocol and associated video article we describe an optimized method for rearing F. arisanus based on a previously described approach12. The method we describe here allows rearing of F. arisanus in a small scale without the use of fruit, using materials available in tropical regions around the world and with relatively low manual labor requirements.

An Optimized Protocol for Rearing Fopius arisanus, a Parasitoid of Tephritid Fruit Flies

Fopius arisanus is an egg-larval parasitoid of Tephritid fruit flies that is successfully used in biological control of these important tropical pests. We describe here an optimized protocol for rearing F. arisanus on a small scale using readily available materials.

Fopius arisanus (Sonan) is an important parasitoid of Tephritid fruit flies for at least two reasons. First, it is the one of only three opiine ...

Detection of Histone Modifications in Plant Leaves

Chromatin structure is important for the regulation of gene expression in eukaryotes. In this process, chromatin remodeling, DNA methylation, and covalent modifications on the amino-terminal tails of histones H3 and H4 play essential roles1-2. H3 and H4 histone modifications include methylation of lysine and arginine, acetylation of lysine, and phosphorylation of serine residues1-2. These modifications are associated either with gene activation, repression, or a primed state of gene that supports more rapid and robust activation of expression after perception of appropriate signals (microbe-associated molecular patterns, light, hormones, etc.)3-7. 
Here, we present a method for the reliable and sensitive detection of specific chromatin modifications on selected plant genes. The technique is based on the crosslinking of (modified) histones and DNA with formaldehyde8,9, extraction and sonication of chromatin, chromatin immunoprecipitation (ChIP) with modification-specific antibodies9,10, de-crosslinking of histone-DNA complexes, and gene-specific real-time quantitative PCR. The approach has proven useful for detecting specific histone modifications associated with C4 photosynthesis in maize5,11 and systemic immunity in Arabidopsis3.

A reliable and useful approach to detect histone modifications on specific plant genes is described. The approach combines chromatin immunoprecipitation (ChIP) and real-time quantitative PCR. It allows detection of histone modifications on specific genes with a role in diverse physiological processes.

Chromatin structure is important for the regulation of gene expression in eukaryotes. In this process, chromatin remodeling, DNA methylation, and covalent ...

A PCR-based Genotyping Method to Distinguish Between Wild-type and Ornamental Varieties of Imperata cylindrica

Wild-type I. cylindrica (cogongrass) is one of the top ten worst invasive plants in the world, negatively impacting agricultural and natural resources in 73 different countries throughout Africa, Asia, Europe, New Zealand, Oceania and the Americas1-2. Cogongrass forms rapidly-spreading, monodominant stands that displace a large variety of native plant species and in turn threaten the native animals that depend on the displaced native plant species for forage and shelter. To add to the problem, an ornamental variety [I. cylindrica var. koenigii (Retzius)] is widely marketed under the names of Imperata cylindrica 'Rubra', Red Baron, and Japanese blood grass (JBG). This variety is putatively sterile and noninvasive and is considered a desirable ornamental for its red-colored leaves. However, under the correct conditions, JBG can produce viable seed (Carol Holko, 2009 personal communication) and can revert to a green invasive form that is often indistinguishable from cogongrass as it takes on the distinguishing characteristics of the wild-type invasive variety4 (Figure 1). This makes identification using morphology a difficult task even for well-trained plant taxonomists. Reversion of JBG to an aggressive green phenotype is also not a rare occurrence. Using sequence comparisons of coding and variable regions in both nuclear and chloroplast DNA, we have confirmed that JBG has reverted to the green invasive within the states of Maryland, South Carolina, and Missouri. JBG has been sold and planted in just about every state in the continental U.S. where there is not an active cogongrass infestation. The extent of the revert problem in not well understood because reverted plants are undocumented and often destroyed.
Application of this molecular protocol provides a method to identify JBG reverts and can help keep these varieties from co-occurring and possibly hybridizing. Cogongrass is an obligate outcrosser and, when crossed with a different genotype, can produce viable wind-dispersed seeds that spread cogongrass over wide distances5-7. JBG has a slightly different genotype than cogongrass and may be able to form viable hybrids with cogongrass. To add to the problem, JBG is more cold and shade tolerant than cogongrass8-10, and gene flow between these two varieties is likely to generate hybrids that are more aggressive, shade tolerant, and cold hardy than wild-type cogongrass. While wild-type cogongrass currently infests over 490 million hectares worldwide, in the Southeast U.S. it infests over 500,000 hectares and is capable of occupying most of the U.S. as it rapidly spreads northward due to its broad niche and geographic potential3,7,11. The potential of a genetic crossing is a serious concern for the USDA-APHIS Federal Noxious Week Program. Currently, the USDA-APHIS prohibits JBG in states where there are major cogongrass infestations (e.g., Florida, Alabama, Mississippi). However, preventing the two varieties from combining can prove more difficult as cogongrass and JBG expand their distributions. Furthermore, the distribution of the JBG revert is currently unknown and without the ability to identify these varieties through morphology, some cogongrass infestations may be the result of JBG reverts. Unfortunately, current molecular methods of identification typically rely on AFLP (Amplified Fragment Length Polymorphisms) and DNA sequencing, both of which are time consuming and costly. Here, we present the first cost-effective and reliable PCR-based molecular genotyping method to accurately distinguish between cogongrass and JBG revert.

A PCR-based Genotyping Method to Distinguish Between Wild-type and Ornamental Varieties of Imperata cylindrica

We provide a cost-effective and rapid molecular genotyping protocol that employs variety-specific PCR primers that target DNA sequence differences within the chloroplast trnL-F spacer region to differentiate between varieties of Imperata cylindrica (cogongrass) that cannot be distinguished by morphology alone. These varieties include the federally listed noxious weed, cogongrass and closely-related, wide-spread ornamental variety, I. cylindrica var. koenigii (Japanese blood grass).

Wild-type I. cylindrica (cogongrass) is one of the top ten worst invasive plants in the world, negatively impacting agricultural and natural resources in ...

Optimized Protocol for Retinal Wholemount Preparation for Imaging and Immunohistochemistry

Working with delicate tissue can be a complicating factor when performing immunohistochemical assessment. Here, we present a method that utilizes a ring-supported hydrophilized PTFE membrane to provide structural support to both living and fixed tissue during immunohistochemical processing, which allows for the use of a variety of protocols that would otherwise cause damage to the tissue. First, this is demonstrated with bolus loading of fluorescent markers into living retinal tissue. This method allows for quick visualization of targeted structures, while the membrane support maintains tissue integrity during the injection and allows for easy transfer of the preparation for further imaging or processing.
Second, a procedure for antibody staining in tissue fixed with carbodiimide is described. Though paraformaldehyde fixation is more common, carbodiimide fixation provides a superior substrate for the visualization of synaptic proteins. A limitation of carbodiimide is that the resulting fixed tissue is relatively fragile; however, this is overcome with the use of the supporting membrane. Retinal tissue is used to demonstrate these techniques, but they may be applied to any fragile tissue.

The protocol described here is for structural assessment of a wholemount retinal preparation. This includes descriptions of tissue dissection, mounting onto a hydrophilized polytetrafluoroethylene (PTFE) membrane insert, bolus loading with fluorescent markers, and a comparison of fixation with carbodiimide and paraformaldehyde for immunohistochemical analysis of cellular and synaptic components.

Working with delicate tissue can be a complicating factor when performing immunohistochemical assessment. Here, we present a method that utilizes a ...

Colorimetric Detection of Bacteria Using Litmus Test

There are increasing demands for simple but still effective methods that can be used to detect specific pathogens for point-of-care or field applications. Such methods need to be user-friendly and produce reliable results that can be easily interpreted by both specialists and non-professionals. The litmus test for pH is simple, quick, and effective as it reports the pH of a test sample via a simple color change. We have developed an approach to take advantage of the litmus test for bacterial detection. The method exploits a bacterium-specific RNA-cleaving DNAzyme to achieve two functions: recognizing a bacterium of interest and providing a mechanism to control the activity of urease. Through the use of magnetic beads immobilized with a DNAzyme-urease conjugate, the presence of bacteria in a test sample is relayed to the release of urease from beads to solution. The released urease is transferred to a test solution to hydrolyze urea into ammonia, resulting in an increase of pH that can be visualized using the classic litmus test.

We describe a protocol for colorimetric detection of E. coli using a modified litmus test that takes advantage of an RNA-cleaving DNAzyme, urease, and magnetic beads.

There are increasing demands for simple but still effective methods that can be used to detect specific pathogens for point-of-care or field applications. ...

Implantation of Electrospun Vascular Grafts with Optimized Structure in a Rat Model

Here, we present a protocol to fabricate macroporous PCL vascular graft and describe an evaluation protocol by using a rat model of abdominal aorta replacement. The electrospun vascular grafts often possess relatively small pores, which limit cell infiltration into the grafts and hinder the regeneration and remodeling of the neo-arteries. In this study, PCL vascular grafts with thicker fibers (5 - 6 &#181;m) and larger pores (~30 &#181;m) were fabricated by using a modified processing technique. The long-term performance of the graft was evaluated by implantation in a rat abdominal aorta model. Ultrasound analysis showed that the grafts remained patent without aneurysm or stenosis occurring even after 12 months of implantation. Macroporous structure improved the cell ingrowth and thus promoted tissue regenerated at 3 months. More importantly, there was no sign of adverse remodeling, such as calcification within the graft wall after 12 months. Therefore, electrospun PCL vascular grafts with modified macroporous processing hold potential to be an artery substitute for long-term implantation.

Here, we present a modified electrospinning method to fabricate PCL vascular grafts with thick fibers and large pores, and describe a protocol to evaluate the in vivo performance in a rat model of abdominal aorta replacement.

Here, we present a protocol to fabricate macroporous PCL vascular graft and describe an evaluation protocol by using a rat model of abdominal aorta ...

Optimized Scratch Assay for In Vitro Testing of Cell Migration with an Automated Optical Camera

Cell migration is an important process that influences many aspects of health, such as wound healing and cancer, and it is, therefore, crucial for developing methods to study the migration. The scratch assay has long been the most common in vitro method to test compounds with anti- and pro-migration properties because of its low cost and simple procedure. However, an often-reported problem of the assay is the accumulation of cells across the edge of the scratch. Furthermore, to obtain data from the assay, images of different exposures must be taken over a period of time at the exact same spot to compare the movements of the migration. Different analysis programs can be used to describe the scratch closure, but they are labor intensive, inaccurate, and forces cycles of temperature changes. In this study, we demonstrate an optimized method for testing the migration effect, e.g. with the naturally occurring proteins Human- and Bovine-Lactoferrin and their N-terminal peptide Lactoferricin on the epithelial cell line HaCaT. A crucial optimization is to wash and scratch in PBS, which eliminates the aforementioned accumulation of cells along the edge. This could be explained by the removal of cations, which have been shown to have an effect on keratinocyte cell-cell connection. To ensure true detection of migration, pre-treating with mitomycin C, a DNA synthesis inhibitor, was added to the protocol. Finally, we demonstrate the automated optical camera, which eliminates excessive temperature cycles, manual labor with scratch closure analysis, while improving on reproducibility and ensuring analysis of identical sections of the scratch over time.

Optimized Scratch Assay for In Vitro Testing of Cell Migration with an Automated Optical Camera

Here we describe a procedure to test the cell migration in vitro with an automated optical camera microscope. The scratch assay has been widely used where the closure of the scratch is followed for a set period. The optical microscope enables dependable and cheap detection of cell migration.