SZ and DW receive an unrestricted grant of Viropharma.

1. Preparation of Bromelain-treated Red Blood Cells
<ol>
	<li>Wash 0-typed red blood cells 3x with 1x PBS (centrifugation at 664 x g for 2-5 min).</li>
	<li>Incubate 1 volume of packed RBCs with two volumes of a 0.5% bromelain solution for 10 min at 37 &#176;C.</li>
	<li>Wash the cells 3x with 1x PBS.</li>
	<li>The cells can be stored as a 3% solution at 4 &#176;C in 1x PBS for at least one week.</li>
</ol>
2. C3 and C4 Deposition Analysis on RBCs by FACS
<ol>
	<li>Heat-inactivate the required amount of patient serum (or other anti-RBC antibody source) by heating the sample for 30 min at 56 &#176;C.</li>
	<li>Wash bromelain-treated RBCs three times in VBG- (5 mM Veronal, 150 mM NaCl, 0.05% gelatin pH 7.4) and resuspend them in VBG++ (VBG-- + 2 mM MgCl2 + 10 mM CaCl2) to give a 0.5% solution.</li>
	<li>Pipette the following components into a round-bottom plate with a glass pearl (for proper mixing): 25 &#181;l 0.5% RBCs, 37.5 &#181;l fresh AB serum (complement source) and 37.5 &#181;l 200 &#181;g/ml anti-C5. Anti-C5 is expensive and might be difficult to obtain. One could consider using C5-/C6-/C7- or C8-deficient serum instead of AB serum and anti-C5.</li>
	<li>Add patient serum per well to a final concentration of 0.1-33%. Correct for differences in serum concentration per well due using heat-inactivated AB serum. Add VBG++ to get a final volume of 150 &#181;l/well. Close plate with ELISA foil.</li>
	<li>Incubate 1.5-2 hr at 37 &#176;C while shaking.</li>
	<li>Wash the RBCs three times with PBS + 0.5% BSA (centrifugation at 664 x g for 2 min).</li>
	<li>Add fluorescently labeled anti-C3 and anti-C4 monoclonal antibodies or their Fab fragments (to reduce agglutination) in PBS + 0.5% BSA to a final concentration of 1 &#181;g/ml. Here custom developed anti-C3-Alexa Fluor 488 and anti-C4-Alexa Fluor 647 monoclonal antibodies are used; the choice of these fluorescent labels allows simultaneous detection of C3 and C4 by FACS.</li>
	<li>Incubate 30-45 min at room temperature with gentle shaking.</li>
	<li>Wash RBCs 3x with PBS + 0.5% BSA.</li>
	<li>Resuspend RBCs 150 &#181;l in PBS +0.5% BSA and pipette them into a new plate (to get rid of the glass pearls before FACS analysis).</li>
	<li>Perform FACS analysis. Separate single cells from doublets in a scatter plotting FSC-A; set the gate on the single RBCs; select the appropriate detection channel for the fluorescence signals (e.g. FITC and APC).</li>
	<li>Quantify results using the median fluorescence intensity.</li>
</ol>
Note: It is possible to use an isotype control (e.g. fluorescently labeled anti-IL6 mouse IgG1). However, it is recommended to include a true negative control e.g. by incubating RBCs without patient serum (only AB serum) or without a complement source (heat-inactivated AB serum and heat-inactivated patient serum), and then stain these with the same anti-C3-Alexa Fluor 488 and anti-C4-Alexa Fluor 647 antibodies. This gives a more valid control than an isotype control in the case of red blood cells12, although these different controls typically give the same, negative outcome.
3. Quantitative Hemolytic Assay
<ol>
	<li>Heat-inactivate the required amount of patient sera (or other anti-RBC antibody source) by heating the sample 30 min at 56 &#176;C.</li>
	<li>Wash RBCs 3x with VBG-- and once with VBG++.</li>
	<li>Pipette the following components into a round-bottom plate with a glass pearl (for proper mixing): 35 &#181;l 3% RBCs, 25 &#181;l fresh AB serum (complement source) and 1-50% patient serum. Correct for differences in serum concentration using heat-inactivated AB serum. Add VBG++ to get a final volume of 150 &#181;l/well. Close plate with ELISA foil.</li>
	<li>Incubate at 37 &#176;C for 1.5-2 hr with shaking.</li>
	<li>Centrifuge plate at 664 x g for 5 min with reduced deceleration (e.g. deceleration to full stop in 2-3 min).</li>
	<li>Carefully pipette 90 &#181;l supernatant in a new microtiter plate. It is important at this step to prevent air bubbles and to prevent to take along intact cells.</li>
	<li>Measure A414/690 in a suitable spectrophotometer.</li>
	<li>Express the lysis as a percentage of the lysis of a sample RBCs with pure water.</li>
</ol>

<ol>
	<li>Zeerleder, S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Autoimmune+haemolytic+anaemia+-+a+practical+guide+to+cope+with+a+diagnostic+and+therapeutic+challenge.">Autoimmune haemolytic anaemia - a practical guide to cope with a diagnostic and therapeutic challenge.</a> Neth. J. Med. 69 (4), 177-184 (2011).</li><li>Reardon, J. E., Marques, M. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Laboratory+evaluation+and+transfusion+support+of+patients+with+autoimmune+hemolytic+anemia.">Laboratory evaluation and transfusion support of patients with autoimmune hemolytic anemia.</a> Am. J. Clin. Pathol. 125, 71-77 (2006).</li><li>Lai, M., Leone, G., Landolfi, R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Autoimmune+hemolytic+anemia+with+gel-based+immunohematology+tests.">Autoimmune hemolytic anemia with gel-based immunohematology tests.</a> Am. J. Clin. Pathol. 139 (4), 457-463 (2013).</li><li>Zantek, N. D., Koepsell, S. A., Tharp Jr, ., R, D., Cohn, C. S. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+direct+antiglobulin+test:+A+critical+step+in+the+evaluation+of+hemolysis.">The direct antiglobulin test: A critical step in the evaluation of hemolysis.</a> Am. J. Hematol. 87 (7), 707-709 (2012).</li><li>Natukunda, B., Brand, A., Schonewille, H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Red+blood+cell+alloimmunization+from+an+African+perspective.">Red blood cell alloimmunization from an African perspective.</a> Curr. Opin. Hematol. 17 (6), 565-570 (2010).</li><li>Packman, C. H. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Hemolytic+anemia+due+to+warm+autoantibodies.">Hemolytic anemia due to warm autoantibodies.</a> Blood Rev. 22 (1), 17-31 (2008).</li><li>Berentsen, S., Tj&#248;nnfjord, G. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Diagnosis+and+treatment+of+cold+agglutinin+mediated+autoimmune+hemolytic+anemia.">Diagnosis and treatment of cold agglutinin mediated autoimmune hemolytic anemia.</a> Blood Rev. 26 (3), 107-115 (2012).</li><li>Petz, L. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cold+antibody+autoimmune+hemolytic+anemia.">Cold antibody autoimmune hemolytic anemia.</a> Blood Rev. 22 (1), 1-15 (2008).</li><li>Barros, M. M. O., Blajchman, M. A., Bordin, J. O. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Warm+autoimmune+hemolytic+anemia:+recent+progress+in+understanding+the+immunobiology+and+the+treatment.">Warm autoimmune hemolytic anemia: recent progress in understanding the immunobiology and the treatment.</a> Transfus. Med. Rev. 24 (3), 195-210 (2010).</li><li>Endoh, T., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optimal+prewarming+conditions+for+Rh+antibody+testing.">Optimal prewarming conditions for Rh antibody testing.</a> Transfusion. 46 (9), 1521-1525 (2006).</li><li>Wouters, D., et al. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=C1-esterase+inhibitor+concentrate+rescues+erythrocytes+from+complement-mediated+destruction+in+autoimmune+hemolytic+anemia.">C1-esterase inhibitor concentrate rescues erythrocytes from complement-mediated destruction in autoimmune hemolytic anemia.</a> Blood. 121 (7), 1242-1244 (2013).</li><li>Arndt, P. A., Garratty, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+Critical+Review+of+Published+Methods+for+Analysis+of+Red+Cell+Antigen-Antibody+Reactions+by+Flow+Cytometry,+and+Approaches+for+Resolving+Problems+with+Red+Cell+Agglutination.">A Critical Review of Published Methods for Analysis of Red Cell Antigen-Antibody Reactions by Flow Cytometry, and Approaches for Resolving Problems with Red Cell Agglutination.</a> Transfus. Med. Rev. 24 (3), 172-194 (2010).</li></ol>

The authors have nothing to disclose.

The above assays are reproducible and robust. They are easy to perform and it is possible to perform them with many samples at the same time (in a 96-well plate). Hence, this approach would also be suitable for a fully automated system, e.g. an ELISA robot system. In contrast to the currently used techniques, these assays are quantitative and this will help e.g. in the study of the effect of complement inhibitors. Moreover, the interpretation is objective, which is an improvement over the currently used...

Antibodies against red blood cells (RBCs) can be induced by transfusion of RBCs expressing an antigen which is not present on recipient RBCs. These allo-antibodies can cause severe acute hemolytic transfusion reactions due to complement activation upon the following transfusion5. In auto-immune hemolytic anemia (AIHA), patients have auto-antibodies against their own RBCs. This leads to accelerated clearance of the cells via the interaction of IgG bound to RBCs with Fc&#947;-receptors on phagocytes in the spleen and/or in case of auto-antibodies able to activate complement via complement receptors in the liver6,7. Fulminant complement activation resulting in intravascular hemolysis is rare but often fatal. Accelerated, complement mediated RBC destruction induced by either allo- or autoantibodies results in acute anemia and hence potentially fatal tissue hypoxia. The auto-antibodies in AIHA are classified in warm and cold antibodies, depending on the optimal temperature they bind to RBCs (37 &#176;C or lower, respectively). The warm antibodies are usually of IgG isotype and the cold antibodies of the IgM isotype8,9. AIHA can be secondary to e.g. lymphoprolyferative disorders, connective tissue diseases, solid tumors, infections or drugs, but in 50% of the cases AIHA is idiopathic9.
Detection of gammaglobulins (e.g. IgG or IgM) and complement bound to patient&#39;s RBCs is performed by means of a semiquantitative direct antiglobulin (Coombs) test (DAT). In the DAT patient RBCs are incubated with anti-IgG or anti-C3d. Occurrence of RBC agglutination demonstrates the presence of attached complement components or IgG binding. Detection of allo- or autoantibodies in the patient&#39;s serum is performed by means of the indirect antiglobulin test (IAT). In the IAT, bromelain-treated test RBCs are incubated with patient serum, washed and then incubated with anti-human IgG. In case RBCs have been sensitized with anti-RBC IgG present in the patient serum agglutination will occur. IgM antibodies to RBCs will directly lead to agglutination upon incubation of bromelain-treated test RBCs with patient serum. RBC agglutination in the direct Coombs test or in the IAT is visually assessed either by eye in a test tube or by loading the sample on a small Sephadex column separating agglutinated and single RBCs by size1.
Another frequently used technique to measure complement activation on RBCs is the hemolytic assay1, in which the capacity of patient serum to induce (complement-mediated) hemolysis of bromelain-treated RBCs10 is assessed. The test is noted as positive when the supernatant after centrifugation is stained red due to released hemoglobin and considered to be negative if it remains colorless. Both the antiglobulin test and the hemolytic assay are semiquantitative, since the highest serum dilution is denoted in which the test is still positive.
The antiglobulin test and the hemolytic assay are robust assays that are routinely used in diagnostics. Since these assays are semiquantitative and dependent on the experience of the technician performing the assay they are not suitable to study subtle differences of complement activation on RBCs, as needed when evaluating the efficacy of complement inhibitors. Therefore, we developed two quantitative assays to determine the complement activation by (auto-)antibodies to RBCs, which we will describe in this paper.
First, we developed an assay to measure the deposition of activation fragments of complement C3 and C4 on RBCs (Figure 1A). In this assay, human bromelain-treated type-0 RBCs are incubated with heat-inactivated patient serum (anti-RBC antibody source), fresh AB serum (complement source) and anti-C5 monoclonal antibody (Eculizumab). During this incubation, C3 and C4 deposition will occur if the patient serum contains complement activating anti-RBC antibodies. In order to prevent RBC lysis by downstream complement activation a blocking anti-C5 monoclonal antibody is added. Next, C3 and C4 deposition on the RBCs is detected by FACS using fluorescently labeled monoclonal antibodies or Fab-fragments reacting with C3 and C4, respectively. Gating on single RBCs is important to ensure the reliability of the results. Advantages of this technique include that a small volume of patient material is required, complement activation at an early stage of the cascade is assessed and the method is reproducible and quantitative. An additional advantage of looking at both C3 and C4 is that a distinction can be made between the classical and lectin pathway activation (both C3 and C4 deposition) and the alternative pathway activation (only C3 deposition). The use of bromelain-treated RBCs instead of untreated RBCs increases the sensitivity of the assay.
The second assay is based on the currently used hemolytic assay (Figure 1B). Human bromelain-treated type-0 RBCs are incubated with heat-inactivated patient serum (anti-RBC antibody source) and fresh AB serum (complement source). If complement is activated by patient anti-RBC antibodies, dose dependent RBC lysis will occur, leading to release of hemoglobin. The amount of released hemoglobin is quantified by measuring its absorbance at 414 nm in the supernatant after spinning down the intact and fragmented RBCs. The absorbance correlates with the amount of occurred hemolysis. In contrast to the currently used assay, this protocol allows for an objective, quantitative value of hemolysis that is very reproducible and not dependent on the person interpreting the assay.
An application of these methods has been described in 11, where the potential use of C1-inhibitor as complement inhibitor in AIHA was studied.

<table border="0" cellpadding="0" cellspacing="0" width="845">
	<colgroup>
		<col />
		<col />
		<col />
		<col />
	</colgroup>
	<tbody>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">PBS</td>
			<td style="width:195px;">Fresenius Kabi</td>
			<td style="width:119px;"></td>
			<td style="width:316px;"></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">BSA</td>
			<td style="width:195px;">Sigma</td>
			<td style="width:119px;">B-4287</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Barbital</td>
			<td style="width:195px;">Fagron</td>
			<td style="width:119px;">0261</td>
			<td>This chemical is subject to drug regulation.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Sodium Barbital</td>
			<td style="width:195px;">Fagron</td>
			<td style="width:119px;">0263</td>
			<td>This chemical is subject to drug regulation.</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Gelatin</td>
			<td style="width:195px;">Merck</td>
			<td style="width:119px;">1.0470.0500</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Sodium chloride</td>
			<td style="width:195px;">Merck</td>
			<td style="width:119px;">1.06404.1000</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Magnesium Chloride</td>
			<td style="width:195px;">Merck</td>
			<td style="width:119px;">1.05833.0250</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Calcium chloride</td>
			<td style="width:195px;">Merck</td>
			<td style="width:119px;">1.0238.0500</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Dylight 488 amine reactive dye</td>
			<td style="width:195px;">Pierce</td>
			<td style="width:119px;">46402</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">Dylight 650 amine reactive dye</td>
			<td style="width:195px;">Pierce</td>
			<td style="width:119px;">62265</td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">&#945;C5 (Eculizumab)</td>
			<td style="width:195px;">Alexion Pharmaceuticals</td>
			<td style="width:119px;"></td>
			<td></td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">FACS (Canto)</td>
			<td style="width:195px;">BD</td>
			<td style="width:119px;"></td>
			<td>Any FACS can be used that has the appropiate lasers.</td>
		</tr>
		<tr height="42">
			<td height="42" style="height:42px;width:216px;">Spectrophotometer (e.g. Multiskan spectrum)</td>
			<td style="width:195px;">Thermo Labsystems</td>
			<td style="width:119px;">1500-193</td>
			<td>Any spectrophotometer with the right wavelength range can be used</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">BD FACSDiva software v 6.1.2</td>
			<td style="width:195px;">BD</td>
			<td style="width:119px;">643629</td>
			<td>Any compatible FACS analysis software can be used</td>
		</tr>
		<tr height="21">
			<td height="21" style="height:21px;width:216px;">bromelain</td>
			<td style="width:195px;">Sanquin</td>
			<td style="width:119px;">K1121</td>
			<td></td>
		</tr>
	</tbody>
</table>

methods for quantitative detection of antibody-induced complement activation on red blood cells

Antibodies against red blood cells (RBCs) can lead to complement activation resulting in an accelerated clearance via complement receptors in the liver (extravascular hemolysis) or leading to intravascular lysis of RBCs. Alloantibodies (e.g. ABO) or autoantibodies to RBC antigens (as seen in autoimmune hemolytic anemia, AIHA) leading to complement activation are potentially harmful and can be - especially when leading to intravascular lysis - fatal1. Currently, complement activation due to (auto)-antibodies on RBCs is assessed in vitro by using the Coombs test reflecting complement deposition on RBC or by a nonquantitative hemolytic assay reflecting RBC lysis1-4. However, to assess the efficacy of complement inhibitors, it is mandatory to have quantitative techniques. Here we describe two such techniques. First, an assay to detect C3 and C4 deposition on red blood cells that is induced by antibodies in patient serum is presented. For this, FACS analysis is used with fluorescently labeled anti-C3 or anti-C4 antibodies. Next, a quantitative hemolytic assay is described. In this assay, complement-mediated hemolysis induced by patient serum is measured making use of spectrophotometric&#160;detection of the released hemoglobin. Both of these assays are very reproducible and quantitative, facilitating studies of antibody-induced complement activation.

Figure 2A shows a representative scatter plot for RBCs. Suitable gating for single RBCs can be seen in de FSC-W - FSC-A plot (P1). Usually around 95% of the RBCs fall within this P1 gate (single cells), but when a high percentage of patient serum is used, this can drop to 70-80%, especially when anti-RBC IgM is present in the patient serum.
Representative results for the effect of AIHA patient serum on C4 deposition are shown in Figure 2B and on C3 deposition ...

Watch this Scientific Journal Video about Methods for Quantitative Detection of Antibody-induced Complement Activation on Red Blood Cells at JoVE.com

Methods for Quantitative Detection of Antibody-induced Complement Activation on Red Blood Cells

Here we describe two assays for measuring complement activation induced by antibodies against red blood cells. The major advantage over the current assays is their quantitative and easy-to-interpret nature.

Antibodies against red blood cells (RBCs) can lead to complement activation resulting in an accelerated clearance via complement receptors in the liver ...

methods-for-quantitative-detection-antibody-induced-complement

Research

JoVE Journal

Immunology and Infection

30.4K Views.  University of Amsterdam.  Здесь мы опишем два анализы для измерения активации комплемента, вызванное антителами против красных кровяных клеток. Основным преимуществом над текущими анализов является их количественный и природа простой в интерпретации. 

Video: Methods for Quantitative Detection of Antibody-induced Complement Activation on Red Blood Cells

Depletion of Specific Cell Populations by Complement Depletion

The purification of immune cell populations is often required in order to study their unique functions. In particular, molecular approaches such as real-time PCR and microarray analysis require the isolation of cell populations with high purity. Commonly used purification strategies include fluorescent activated cell sorting (FACS), magnetic bead separation and complement depletion. Of the three strategies, complement depletion offers the advantages of being fast, inexpensive, gentle on the cells and a high cell yield. The complement system is composed of a large number of plasma proteins that when activated initiate a proteolytic cascade culminating in the formation of a membrane-attack complex that forms a pore on a cell surface resulting in cell death1. The classical pathway is activated by IgM and IgG antibodies and was first described as a mechanism for killing bacteria. With the generation of monoclonal antibodies (mAb), the complement cascade can be used to lyse any cell population in an antigen-specific manner. Depletion of cells by the complement cascade is achieved by the addition of complement fixing antigen-specific antibodies and rabbit complement to the starting cell population. The cells are incubated for one hour at 37&deg;C and the lysed cells are subsequently removed by two rounds of washing. MAb with a high efficiency for complement fixation typically deplete 95-100% of the targeted cell population. Depending on the purification strategy for the targeted cell population, complement depletion can be used for cell purification or for the enrichment of cell populations that then can be further purified by a subsequent method.

To effectively study the function of immune cell populations their purification is often required. Complement depletion is a fast and inexpensive technique for the isolation of immune cell populations with high purity.

The purification of immune cell populations is often required in order to study their unique functions.  In particular, molecular approaches such as ...

Isolation of Mouse Peritoneal Cavity Cells

The peritoneal cavity is a membrane-bound and fluid-filled abdominal cavity of mammals, which contains the liver, spleen, most of the gastro-intestinal tract and other viscera. It harbors a number of immune cells including macrophages, B cells and T cells. The presence of a high number of na&iuml;ve macrophages in the peritoneal cavity makes it a preferred site for the collection of na&iuml;ve tissue resident macrophages (1). The peritoneal cavity is also important to the study of B cells because of the presence of a unique peritoneal cavity-resident B cell subset known as B1 cells in addition to conventional B2 cells. B1 cells are subdivided into B1a and B1b cells, which can be distinguished by the surface expression of CD11b and CD5. B1 cells are an important source of natural IgM providing early protection from a variety of pathogens (2-4). These cells are autoreactive in nature (5), but how they are controlled to prevent autoimmunity is still not understood completely. On the contrary, CD5+ B1a cells possess some regulatory properties by virtue of their IL-10 producing capacity (6). Therefore, peritoneal cavity B1 cells are an interesting cell population to study because of their diverse function and many unaddressed questions associated with their development and regulation. The isolation of peritoneal cavity resident immune cells is tricky because of the lack of a defined structure inside the peritoneal cavity. Our protocol will describe a procedure for obtaining viable immune cells from the peritoneal cavity of mice, which then can be used for phenotypic analysis by flow cytometry and for different biochemical and immunological assays.

The peritoneal cavity in mammals contains different immune cell populations crucial for innate immune responses. An efficient isolation method is required for biochemical and functional analyses of these cells. Here we provide a comprehensive method for the isolation of peritoneal cavity cells in the mouse.

The peritoneal cavity is a membrane-bound and fluid-filled abdominal cavity of mammals, which contains the liver, spleen, most of the gastro-intestinal ...

Murine Model of CD40-activation of B cells

Research on B cells has shown that CD40 activation improves their antigen presentation capacity. When stimulated with interleukin-4 and CD40 ligand (CD40L), human B cells can be expanded without difficulties from small amounts of peripheral blood within 14 days to very large amounts of highly-pure CD40-B cells (&gt;109 cells per patient) from healthy donors as well as cancer patients1-4. CD40-B cells express important lymph node homing molecules and can attract T cells in vitro5. Furthermore they efficiently take up, process and present antigens to T cells6,7. CD40-B cells were shown to not only prime na&iacute;ve, but also expand memory T cells8,9. Therefore CD40-activated B cells (CD40-B cells) have been studied as an alternative source of immuno-stimulatory antigen-presenting cells (APC) for cell-based immunotherapy1,5,10. In order to further study whether CD40-B cells induce effective T cell responses in vivo and to study the underlying mechanism we established a cell culture system for the generation of murine CD40-activated B cells. Using splenocytes or purified B cells from C57BL/6 mice for CD40-activation, optimal conditions were identified as follows: Starting from splenocytes of C57BL/6 mice (haplotype H-2b) lymphocytes are purified by density gradient centrifugation and co-cultured with HeLa cells expressing recombinant murine CD40 ligand (tmuCD40L HeLa)11. Cells are recultured every 3-4 days and key components such as CD40L, interleukin-4, -Mercaptoethanol and cyclosporin A are replenished. In this protocol we demonstrate how to obtain fully activated murine CD40-B cells (mCD40B) with similar APC-phenotype to human CD40-B cells (Fig 1a,b). CD40-stimulation leads to a rapid outgrowth and expansion of highly pure (&gt;90%) CD19+ B cells within 14 days of cell culture (Fig 1c,d). To avoid contamination with non-transfected cells, expression of the murine CD40 ligand on the transfectants has to be controlled regularly (Fig 2). Murine CD40-activated B cells can be used to study B-cell activation and differentiation as well as to investigate their potential to function as APC in vitro and in vivo. Moreover, they represent a promising tool for establishing therapeutic or preventive vaccination against tumors and will help to answer questions regarding safety and immunogenicity of this approach12.

In this video, we demonstrate the procedure of CD40-activation and expansion of murine B cells from splenocytes of C57BL/6 mice, which can be used as a model antigen-presenting cell (APC) to study induction of immunity.

Research on B cells has shown that CD40 activation improves their antigen presentation capacity. When stimulated with interleukin-4 and CD40 ligand ...

Combination of Adhesive-tape-based Sampling and Fluorescence in situ Hybridization for Rapid Detection of Salmonella on Fresh Produce

This protocol describes a simple approach for adhesive-tape-based sampling of tomato and other fresh produce surfaces, followed by on-tape fluorescence in situ hybridization (FISH) for rapid culture-independent detection of Salmonella spp. Cell-charged tapes can also be placed face-down on selective agar for solid-phase enrichment prior to detection. Alternatively, low-volume liquid enrichments (liquid surface miniculture) can be performed on the surface of the tape in non-selective broth, followed by FISH and analysis via flow cytometry. To begin, sterile adhesive tape is brought into contact with fresh produce, gentle pressure is applied, and the tape is removed, physically extracting microbes present on these surfaces. Tapes are mounted sticky-side up onto glass microscope slides and the sampled cells are fixed with 10% formalin (30 min) and dehydrated using a graded ethanol series (50, 80, and 95%; 3 min each concentration). Next, cell-charged tapes are spotted with buffer containing a Salmonella-targeted DNA probe cocktail and hybridized for 15 - 30 min at 55&deg;C, followed by a brief rinse in a washing buffer to remove unbound probe. Adherent, FISH-labeled cells are then counterstained with the DNA dye 4',6-diamidino-2-phenylindole (DAPI) and results are viewed using fluorescence microscopy. For solid-phase enrichment, cell-charged tapes are placed face-down on a suitable selective agar surface and incubated to allow in situ growth of Salmonella microcolonies, followed by FISH and microscopy as described above. For liquid surface miniculture, cell-charged tapes are placed sticky side up and a silicone perfusion chamber is applied so that the tape and microscope slide form the bottom of a water-tight chamber into which a small volume (&le; 500 &mu;L) of Trypticase Soy Broth (TSB) is introduced. The inlet ports are sealed and the chambers are incubated at 35 - 37&deg;C, allowing growth-based amplification of tape-extracted microbes. Following incubation, inlet ports are unsealed, cells are detached and mixed with vigorous back and forth pipetting, harvested via centrifugation and fixed in 10% neutral buffered formalin. Finally, samples are hybridized and examined via flow cytometry to reveal the presence of Salmonella spp. As described here, our "tape-FISH" approach can provide simple and rapid sampling and detection of Salmonella on tomato surfaces. We have also used this approach for sampling other types of fresh produce, including spinach and jalape&ntilde;o peppers.

Combination of Adhesive-tape-based Sampling and Fluorescence in situ Hybridization for Rapid Detection of Salmonella on Fresh Produce

This protocol describes a simple adhesive-tape-based approach for sampling of tomato and other fresh produce surfaces, followed by rapid whole cell detection of Salmonella using fluorescence in situ hybridization (FISH).

This protocol describes a simple approach for adhesive-tape-based sampling of tomato and other fresh produce surfaces, followed by on-tape fluorescence in ...

Protocol for Recombinant RBD-based SARS Vaccines: Protein Preparation, Animal Vaccination and Neutralization Detection

Based on their safety profile and ability to induce potent immune responses against infections, subunit vaccines have been used as candidates for a wide variety of pathogens 1-3. Since the mammalian cell system is capable of post-translational modification, thus forming properly folded and glycosylated proteins, recombinant proteins expressed in mammalian cells have shown the greatest potential to maintain high antigenicity and immunogenicity 4-6.
Although no new cases of SARS have been reported since 2004, future outbreaks are a constant threat; therefore, the development of vaccines against SARS-CoV is a prudent preventive step and should be carried out. The RBD of SARS-CoV S protein plays important roles in receptor binding and induction of specific neutralizing antibodies against virus infection 7-9. Therefore, in this protocol, we describe novel methods for developing a RBD-based subunit vaccine against SARS. Briefly, the recombinant RBD protein (rRBD) was expressed in culture supernatant of mammalian 293T cells to obtain a correctly folded protein with proper conformation and high immunogenicity 6. The transfection of the recombinant plasmid encoding RBD to the cells was then performed using a calcium phosphate transfection method 6,10 with some modifications. Compared with the lipid transfection method 11,12, this modified calcium phosphate transfection method is cheaper, easier to handle, and has the potential to reach high efficacy once a transfection complex with suitable size and shape is formed 13,14. Finally, a SARS pseudovirus neutralization assay was introduced in the protocol and used to detect the neutralizing activity of sera of mice vaccinated with rRBD protein. This assay is relatively safe, does not involve an infectious SARS-CoV, and can be performed without the requirement of a biosafety-3 laboratory 15.
The protocol described here can also be used to design and study recombinant subunit vaccines against other viruses with class I fusion proteins, for example, HIV, respiratory syncytial virus (RSV), Ebola virus, influenza virus, as well as Nipah and Handra viruses. In addition, the methods for generating a pseudovirus and subsequently establishing a pseudovirus neutralization assay can be applied to all these viruses.

This protocol describes a general procedure for studying recombinant receptor-binding domain (RBD)-based subunit vaccines against SARS. It includes methods for transfection and expression of RBD protein in 293T cells, immunization of mice with RBD and detection of neutralization activity of mouse sera using an established SARS pseudovirus neutralization assay.

Based on their safety profile and ability to induce potent immune responses against infections, subunit vaccines have been used as candidates for a wide ...

Intravital Microscopy of the Spleen: Quantitative Analysis of Parasite Mobility and Blood Flow

The advent of intravital microscopy in experimental rodent malaria models has allowed major advances to the knowledge of parasite-host interactions 1,2. Thus, in vivo imaging of malaria parasites during pre-erythrocytic stages have revealed the active entrance of parasites into skin lymph nodes 3, the complete development of the parasite in the skin 4, and the formation of a hepatocyte-derived merosome to assure migration and release of merozoites into the blood stream 5. Moreover, the development of individual parasites in erythrocytes has been recently documented using 4D imaging and challenged our current view on protein export in malaria 6. Thus, intravital imaging has radically changed our view on key events in Plasmodium development. Unfortunately, studies of the dynamic passage of malaria parasites through the spleen, a major lymphoid organ exquisitely adapted to clear infected red blood cells are lacking due to technical constraints.
Using the murine model of malaria Plasmodium yoelii in Balb/c mice, we have implemented intravital imaging of the spleen and reported a differential remodeling of it and adherence of parasitized red blood cells (pRBCs) to barrier cells of fibroblastic origin in the red pulp during infection with the non-lethal parasite line P.yoelii 17X as opposed to infections with the P.yoelii 17XL lethal parasite line 7. To reach these conclusions, a specific methodology using ImageJ free software was developed to enable characterization of the fast three-dimensional movement of single-pRBCs. Results obtained with this protocol allow determining velocity, directionality and residence time of parasites in the spleen, all parameters addressing adherence in vivo. In addition, we report the methodology for blood flow quantification using intravital microscopy and the use of different colouring agents to gain insight into the complex microcirculatory structure of the spleen. 
Ethics statement
All the animal studies were performed at the animal facilities of University of Barcelona in accordance with guidelines and protocols approved by the Ethics Committee for Animal Experimentation of the University of Barcelona CEEA-UB (Protocol No DMAH: 5429). Female Balb/c mice of 6-8 weeks of age were obtained from Charles River Laboratories.

We show the method for performing intravital microscopy of the spleen using GFP transgenic malaria parasites and the quantification of parasite mobility and blood flow within this organ.

The advent of intravital microscopy in experimental rodent malaria models has allowed major advances to the knowledge of parasite-host interactions 1,2. ...

High-throughput Detection Method for Influenza Virus

Influenza virus is a respiratory pathogen that causes a high degree of morbidity and mortality every year in multiple parts of the world. Therefore, precise diagnosis of the infecting strain and rapid high-throughput screening of vast numbers of clinical samples is paramount to control the spread of pandemic infections. Current clinical diagnoses of influenza infections are based on serologic testing, polymerase chain reaction, direct specimen immunofluorescence and cell culture 1,2.
Here, we report the development of a novel diagnostic technique used to detect live influenza viruses. We used the mouse-adapted human A/PR/8/34 (PR8, H1N1) virus 3 to test the efficacy of this technique using MDCK cells 4. MDCK cells (104 or 5 x 103 per well) were cultured in 96- or 384-well plates, infected with PR8 and viral proteins were detected using anti-M2 followed by an IR dye-conjugated secondary antibody. M2 5 and hemagglutinin 1 are two major marker proteins used in many different diagnostic assays. Employing IR-dye-conjugated secondary antibodies minimized the autofluorescence associated with other fluorescent dyes. The use of anti-M2 antibody allowed us to use the antigen-specific fluorescence intensity as a direct metric of viral quantity. To enumerate the fluorescence intensity, we used the LI-COR Odyssey-based IR scanner. This system uses two channel laser-based IR detections to identify fluorophores and differentiate them from background noise. The first channel excites at 680 nm and emits at 700 nm to help quantify the background. The second channel detects fluorophores that excite at 780 nm and emit at 800 nm. Scanning of PR8-infected MDCK cells in the IR scanner indicated a viral titer-dependent bright fluorescence. A positive correlation of fluorescence intensity to virus titer starting from 102-105 PFU could be consistently observed. Minimal but detectable positivity consistently seen with 102-103 PFU PR8 viral titers demonstrated the high sensitivity of the near-IR dyes. The signal-to-noise ratio was determined by comparing the mock-infected or isotype antibody-treated MDCK cells.
Using the fluorescence intensities from 96- or 384-well plate formats, we constructed standard titration curves. In these calculations, the first variable is the viral titer while the second variable is the fluorescence intensity. Therefore, we used the exponential distribution to generate a curve-fit to determine the polynomial relationship between the viral titers and fluorescence intensities. Collectively, we conclude that IR dye-based protein detection system can help diagnose infecting viral strains and precisely enumerate the titer of the infecting pathogens.

This method describes the use of Infrared dye based imaging system for detection of H1N1 in bronchioalveolar lavage (BAL) fluid of infected mice at a high sensitivity. This methodology can be performed in a 96- or 384-well plate, requires &lt;10 &mu;l volume of test material and has the potential for concurrent screening of multiple pathogens.

Influenza virus is a respiratory pathogen that causes a high degree of morbidity and mortality every year in multiple parts of the world. Therefore, ...

Antigens Protected Functional Red Blood Cells By The Membrane Grafting Of Compact Hyperbranched Polyglycerols

Red blood cell (RBC) transfusion is vital for the treatment of a number of acute and chronic medical problems such as thalassemia major and sickle cell anemia 1-3. Due to the presence of multitude of antigens on the RBC surface (~308 known antigens 4), patients in the chronic blood transfusion therapy develop alloantibodies due to the miss match of minor antigens on transfused RBCs 4, 5. Grafting of hydrophilic polymers such as polyethylene glycol (PEG) and hyperbranched polyglycerol (HPG) forms an exclusion layer on RBC membrane that prevents the interaction of antibodies with surface antigens without affecting the passage of small molecules such as oxygen ,glucose, and ions3. At present no method is available for the generation of universal red blood donor cells in part because of the daunting challenge presented by the presence of large number of antigens (protein and carbohydrate based) on the RBC surface and the development of such methods will significantly improve transfusion safety, and dramatically improve the availability and use of RBCs. In this report, the experiments that are used to develop antigen protected functional RBCs by the membrane grafting of HPG and their characterization are presented. HPGs are highly biocompatible compact polymers 6, 7, and are expected to be located within the cell glycocalyx that surrounds the lipid membrane 8, 9 and mask RBC surface antigens10, 11.

The cell membrane modification of red blood cells (RBCs) with hyperbranched polyglycerol (HPG) is presented. Modified RBCs were characterized by aqueous two phase partitioning, osmotic fragility and complement mediated lysis. The camouflage of surface proteins and antigens was evaluated using the flow cytometry and Micro Typing System (MTS) blood phenotyping cards.

Red blood cell (RBC) transfusion is vital for the treatment of a number of acute and chronic medical problems such as thalassemia major and sickle cell ...

Qualitative and Quantitative Assays for Detection and Characterization of Protein Antimicrobials

Initial evaluations of large microbial libraries for potential producers of novel antimicrobial proteins require both qualitative and quantitative methods to screen for target enzymes prior to investing greater research effort and resources. The goal of this protocol is to demonstrate two complementary assays for conducting these initial evaluations. The microslide diffusion assay provides an initial or simple detection screen to enable the qualitative and rapid assessment of proteolytic activity against an array of both viable and heat-killed bacterial target substrates. As a counterpart, the increased sensitivity and reproducibility of the dye-release assay provides a quantitative platform for evaluating and comparing environmental influences affecting the hydrolytic activity of protein antimicrobials. The ability to label specific heat-killed cell culture substrates with Remazol brilliant blue R dye expands this capability to tailor the dye-release assay to characterize enzymatic activity of interest.

Here, we present protocols to rapidly screen and characterize enzymes for antimicrobial activity. The microslide diffusion assay and the dye-release assay utilize target bacterial substrates for qualitative and quantitative enzymatic activity evaluation.

Initial evaluations of large microbial libraries for potential producers of novel antimicrobial proteins require both qualitative and quantitative methods ...

Dextran Enhances the Lentiviral Transduction Efficiency of Murine and Human Primary NK Cells

The efficient transduction of specific genes into natural killer (NK) cells has been a major challenge. Successful transductions are critical to defining the role of the gene of interest in the development, differentiation, and function of NK cells. Recent advances related to chimeric antigen receptors (CARs) in cancer immunotherapy accentuate the need for an efficient method to deliver exogenous genes to effector lymphocytes. The efficiencies of lentiviral-mediated gene transductions into primary human or mouse NK cells remain significantly low, which is a major limiting factor. Recent advances using cationic polymers, such as polybrene, show an improved gene transduction efficiency in T cells. However, these products failed to improve the transduction efficiencies of NK cells. This work shows that dextran, a branched glucan polysaccharide, significantly improves the transduction efficiency of human and mouse primary NK cells. This highly reproducible transduction methodology provides a competent tool for transducing human primary NK cells, which can vastly improve clinical gene delivery applications and thus NK cell-based cancer immunotherapy.

The goal of this study was to formulate technologies that allow for successful gene transduction in primary natural killer (NK) cells. The dextran-mediated lentiviral transduction of human or mouse primary NK cells results in higher gene expression efficiencies. This method of gene transduction will vastly improve NK cell genetic manipulation.

The efficient transduction of specific genes into natural killer (NK) cells has been a major challenge. Successful transductions are critical to defining ...