This protocol is currently used in our laboratory and has been refined over the years by many people including Drs David Sharp, Mijung Kwon, Patrizia Sommi, Dhanya Cheerambathur. We thank Dr Bill Sullivan (UCSC) who provided us with excellent advice on the manipulation and microinjection of early Drosophila embryos when our work in this system was being initiated (ref. 13). We thank all members of the Scholey laboratory. Our work on mitosis in Drosophila is supported by NIH grant GM55507.

Recipes:
Grape Juice plates:
<ul>
<li>5.5g bacto agar</li>
<li>14.5 g dextrose or glucose</li>
<li>7.15 g sucrose</li>
<li>45 ml grape juice concentrate (100% juice).</li>
<li>204.5 ml H20</li>
<li>625 &mu;l 10N NaOH</li>
</ul>
Mix all ingredients and microwave until boiling. Add 2.8 ml acid mix (acid mix: 20.9 ml propionic acid, 2.1 ml phosphoric acid, 27 ml H20)
Mix and pour onto 35 mm Petri dishes. Let solidify at room temperature for one or two days. If plates are not going to be used soon, seal with parafilm and keep at 4&deg;C (allow to equilibrate to RT before using).
Yeast paste:
Dissolve about one teaspoon of yeast (Sigma YSC2, yeast from Saccharomyces cerevisiae type II) in water to form a thick paste. Place a small amount of this on each grape juice plate just prior to use.
G-PEM buffer:
<ul>
<li>80 mM Na-PIPES, pH 6.9</li>
<li>1 mM MgCl2</li>
<li>1 mM EGTA</li>
<li>1 mM GTP</li>
</ul>
Injection buffer:
<ul>
<li>150 mM K-Aspartate</li>
<li>10 mM K-phosphate</li>
<li>20 mM imidazole, pH 7.2</li>
</ul>
Heptane glue:
Unroll double sticky tape and place in a 100ml bottle, add about 50ml heptane, seal the bottle, and rock for several days. When using, add heptane if the glue is too thick.
Dehydration chamber:
Take a 100 mm Petri dish, put one part of a 35 mm dish inside to make a "table" and add Drierite (anhydrous calcium sulfate) around it so that the height of Drierite is no higher than the "table" and cover. The coverslip with embryos will be placed on this "table" for dehydration before injection. It is a good idea to use at least some indicating Drierite and change it when it has changed color.
Protocol:
This protocol can be used for injection of virtually any soluble reagent into the Drosophila syncytial embryo: For example, either a fluorescent protein for observation or a target protein inhibitor or both.
Getting everything ready:
1.- 2 to 3 days before experiment, make grape juice plates and set up lay cage: Take a plastic bottle (6 oz, round bottom from Applied Scientific Drosophila), cut two small holes (about 1cm2) on opposite sides of the bottle and fill with a cotton piece (this will allow air to flow), tap the flies into the bottle and cover with a grape juice plate. Keep at 25&deg;C (or room temperature), flies should lay embryos for about 10 days.
2.- At least one day before the experiment pull needles for injection, we use a Kopf Needle/Pipette puller model 720 and thin walled glass filaments (World Precision Instruments tw100f). For injection of fluorescent tubulin, keep needles at 4&deg;C to prevent temperature-induced polymerization in the needle.
Tubulin preparation:
Note: All work with tubulin should be done at 4&deg;C to prevent polymerization.
<ol>
<li>Take labeled tubulin out of the freezer and put it on ice for 5 to 15 minutes.</li>
<li>Dilute with G-PEM buffer (4 to 10 fold depending on the intensity required).</li>
<li>Centrifuge at 13k rpm at 4&deg;C for 10-15 minutes.</li>
<li>Load 1 - 2 &mu;l into needle.</li>
</ol>
Antibody or chemical inhibitor:
Prepare needles as for tubulin, using an appropriate concentration (this may need to be tested). The antibody can be in injection buffer, G-PEM buffer or PBS. If another buffer is needed, this buffer will need to be injected as a control to make sure this buffer causes no damage on its own.
Note: Inhibitor and fluorescent tubulin can be mixed and injected together if the concentrations allow it. Otherwise, inject the fluorescent tubulin and wait 5 to 10 minutes before injecting the inhibitor. When performing a double injection, start with more embryos, since fewer embryos will recover normally.
Embryo collection:
<ol>
<li>Put a new grape juice plate on the lay cage.</li>
<li>Remove this plate after one hour, this is the first collection of the day and often is not very good. It can be discarded.</li>
<li>Change the plate every hour to keep collecting embryos for one hour each.</li>
</ol>
Coverslip preparation:
<ol>
<li>Put a 50 x 22mm coverslip on one side of a microscope slide. Tape the four corners to the slide so it doesn't move.</li>
<li>Using a cotton tipped applicator, put one layer of heptane glue in one line on the coverslip (the glue should not be viscous and should dry in a few seconds, otherwise add more heptane).</li>
<li>Put a piece of double sticky tape on the slide toward the side of the coverslip.</li>
</ol>
Embryo preparation:
Note: Embryos should be imaged about 2 hours after start of collection, so begin the following steps allowing sufficient time to finish them within this time-frame.
<ol>
<li>With a moistened brush carefully pick up the embryos from the grape juice plate and place on double sticky tape on slide.</li>
<li>Using the outer part of the tweezers, roll the embryos over the double sticky tape until the chorion (the outer membrane) breaks open.</li>
<li>Pick up the embryo by gently rolling it over the chorion so it sticks to the tweezer and place it on the heptane glue on the coverslip with the long side of the embryo parallel to the long side of the coverslip. Set up 10 to 20 embryos in one row.</li>
<li>Remove the coverslip and place it in the dehydration chamber for 3 to 8 minutes (this depends on the humidity of the room and the amount to be injected).</li>
<li>Place on a metal chamber with vacuum grease.</li>
<li>Cover the embryos with halocarbon oil 700 to avoid further dehydration. Embryos are now ready for injection.</li>
</ol>
Embryo injection:
<ol>
<li>Find the embryos under a 16x objective.</li>
<li>Move the embryos away, and find the needle without moving the focal plane.</li>
<li>Center the needle and move it up without moving it in x or y direction.</li>
<li>If the needle is not open, put the edge of the coverslip in the field of view, but not where the needle will be, and lower the needle to the same focal plane. Very carefully move the coverslip until it hits the needle and gently breaks it open. If the needle is open, go to step 5. (Needles can be opened with hydrofluoric acid before filling).</li>
<li>Put the embryos in view (but not where the needle will be), lower the needle into the oil and make sure you obtain nice liquid drops from the needle.</li>
<li>Carefully but steadily move the embryo into the needle and inject a drop into the embryo and move the embryo away. (Or follow the instructions of your injection apparatus).</li>
<li>After all the embryos have been injected, they are ready for observation on a confocal microscope.</li>
</ol>
Imaging:
Image the embryos on a confocal microscope with a 60 or 100X objective: Notes:
<ol>
<li>The time interval on a time lapse series should be at most a few seconds, since mitosis in the embryo is very fast, depending on the exact process to be studied.</li>
<li>A 3D series or a single plane can be acquired depending on the process of interest.</li>
<li>For fast-acting inhibitors, the transfer from injection microscope to imaging microscope has to be fast.</li>
</ol>
<img src="/files/ftp_upload/1382/1382fig1.jpg" alt="figure 1" /> Figure 1: Study of mitosis in the Drosophila syncytial embryo. Nuclei in the early embryo undergo rapid divisions without cytokinesis, during cycles 10 thru 13 nuclei form a monolayer at the cortex. A. Schematic of early embryo with nuclei at cortex. Embryo can express GFP and/or RFP labeled proteins and can be microinjected with other labeled proteins and/or inhibitors. B. Time lapse imaging of embryo expressing GFP-tubulin and RFP-histone. C. Plot of pole-pole separation for cycles 11, 12 and 13 in a wild type embryo. Spindle length exhibits periods of isometric length and periods of elongation, which are very consistent and reproducible. D. Dynamics of spindle microtubules. Injection of low concentration of rhodamine tubulin leads to speckles formed of a few tubulin subunits, which can be used to study microtubule dynamics.

<ol>
	<li>Brust-Mascher, I., Scholey, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Mitotic+spindle+dynamics+in+Drosophila.">Mitotic spindle dynamics in Drosophila.</a> Int Rev Cytol. 259, 139-172 (2007).</li><li>Duffy, J. B. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=GAL4+system+in+Drosophila:+a+fly+geneticist's+Swiss+army+knife.">GAL4 system in Drosophila: a fly geneticist's Swiss army knife.</a> Genesis. 34, 1-15 (2002).</li><li>Morris, R. L. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microinjection+methods+for+analyzing+the+functions+of+kinesins+in+early+embryos.">Microinjection methods for analyzing the functions of kinesins in early embryos.</a> Methods Mol Biol. 164, 163-172 (2001).</li><li>Brust-Mascher, I., Sommi, P., Cheerambathur, D. K., Scholey, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Kinesin-5-dependent+poleward+flux+and+spindle+length+control+in+Drosophila+embryo+mitosis.">Kinesin-5-dependent poleward flux and spindle length control in Drosophila embryo mitosis.</a> Mol Biol Cell. 20, 1749-1762 (2009).</li><li>Brust-Mascher, I., Civelekoglu-Scholey, G., Kwon, M., Mogilner, A., Scholey, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Model+for+anaphase+B:+role+of+three+mitotic+motors+in+a+switch+from+poleward+flux+to+spindle+elongation.">Model for anaphase B: role of three mitotic motors in a switch from poleward flux to spindle elongation.</a> Proc Natl Acad Sci U S A. 101, 15938-15943 (2004).</li><li>Brust-Mascher, I., Scholey, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Microtubule+flux+and+sliding+in+mitotic+spindles+of+Drosophila+embryos.">Microtubule flux and sliding in mitotic spindles of Drosophila embryos.</a> Mol Biol Cell. 13, 3967-3975 (2002).</li><li>Cheerambathur, D. K., Brust-Mascher, I., Civelekoglu-Scholey, G., Scholey, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Dynamic+partitioning+of+mitotic+kinesin-5+crosslinkers+between+microtubule-bound+and+freely+diffusing+states.">Dynamic partitioning of mitotic kinesin-5 crosslinkers between microtubule-bound and freely diffusing states.</a> J Cell Biol. 182, 421-428 (2008).</li><li>Cheerambathur, D. K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Quantitative+analysis+of+an+anaphase+B+switch:+predicted+role+for+a+microtubule+catastrophe+gradient.">Quantitative analysis of an anaphase B switch: predicted role for a microtubule catastrophe gradient.</a> J Cell Biol. 177, 995-1004 (2007).</li><li>Kwon, M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+chromokinesin,+KLP3A,+dives+mitotic+spindle+pole+separation+during+prometaphase+and+anaphase+and+facilitates+chromatid+motility.">The chromokinesin, KLP3A, dives mitotic spindle pole separation during prometaphase and anaphase and facilitates chromatid motility.</a> Mol Biol Cell. 15, 219-233 (2004).</li><li>Sharp, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Functional+coordination+of+three+mitotic+motors+in+Drosophila+embryos.">Functional coordination of three mitotic motors in Drosophila embryos.</a> Mol Biol Cell. 11, 241-253 (2000).</li><li>Sharp, D. J. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+bipolar+kinesin,+KLP61F,+cross-links+microtubules+within+interpolar+microtubule+bundles+of+Drosophila+embryonic+mitotic+spindles.">The bipolar kinesin, KLP61F, cross-links microtubules within interpolar microtubule bundles of Drosophila embryonic mitotic spindles.</a> J Cell Biol. 144, 125-138 (1999).</li><li>Sharp, D. J., Rogers, G. C., Scholey, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Cytoplasmic+dynein+is+required+for+poleward+chromosome+movement+during+mitosis+in+Drosophila+embryos.">Cytoplasmic dynein is required for poleward chromosome movement during mitosis in Drosophila embryos.</a> Nat Cell Biol. 2, 922-930 (2000).</li><li>Sharp, D. J., Yu, K. R., Sisson, J. C., Sullivan, W., Scholey, J. M. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Antagonistic+microtubule-sliding+motors+position+mitotic+centrosomes+in+Drosophila+early+embryos.">Antagonistic microtubule-sliding motors position mitotic centrosomes in Drosophila early embryos.</a> Nat Cell Biol. 1, 51-54 (1999).</li><li>Waterman-Storer, C. M., Desai, A., Bulinski, J. C., Salmon, E. D. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Fluorescent+speckle+microscopy,+a+method+to+visualize+the+dynamics+of+protein+assemblies+in+living+cells.">Fluorescent speckle microscopy, a method to visualize the dynamics of protein assemblies in living cells.</a> Curr Biol. 8, 1227-1230 (1998).</li></ol>

This protocol is relatively straightforward, however, each step requires practice to make sure the embryos are not damaged. Careful control experiments always need to be done to ensure that reliable results are being obtained. One good way to begin this is by microinjecting buffer or rhodamine tubulin into control embryos expressing GFP-tubulin to make sure that mitosis proceeds normally through all cycles at the embryo surface (cycles 10 through 13). In control embryos you should not observe any physical connections bet...

microinjection techniques for studying mitosis in the drosophila melanogaster syncytial embryo

This protocol describes the use of the Drosophila melanogaster syncytial embryo for studying mitosis1. Drosophila has useful genetics with a sequenced genome, and it can be easily maintained and manipulated. Many mitotic mutants exist, and transgenic flies expressing functional fluorescently (e.g. GFP) - tagged mitotic proteins have been and are being generated. Targeted gene expression is possible using the GAL4/UAS system2. 

The Drosophila early embryo carries out multiple mitoses very rapidly (cell cycle duration, &asymp;10 min). It is well suited for imaging mitosis, because during cycles 10-13, nuclei divide rapidly and synchronously without intervening cytokinesis at the surface of the embryo in a single monolayer just underneath the cortex. These rapidly dividing nuclei probably use the same mitotic machinery as other cells, but they are optimized for speed; the checkpoint is generally believed to not be stringent, allowing the study of mitotic proteins whose absence would cause cell cycle arrest in cells with a strong checkpoint. Embryos expressing GFP labeled proteins or microinjected with fluorescently labeled proteins can be easily imaged to follow live dynamics (Fig. 1). In addition, embryos can be microinjected with function-blocking antibodies or inhibitors of specific proteins to study the effect of the loss or perturbation of their function3. These reagents can diffuse throughout the embryo, reaching many spindles to produce a gradient of concentration of inhibitor, which in turn results in a gradient of defects comparable to an allelic series of mutants. Ideally, if the target protein is fluorescently labeled, the gradient of inhibition can be directly visualized4. It is assumed that the strongest phenotype is comparable to the null phenotype, although it is hard to formally exclude the possibility that the antibodies may have dominant effects in rare instances, so rigorous controls and cautious interpretation must be applied. Further away from the injection site, protein function is only partially lost allowing other functions of the target protein to become evident.

Watch this Scientific Journal Video about Microinjection Techniques for Studying Mitosis in the Drosophila melanogaster Syncytial Embryo at JoVE.com

Microinjection Techniques for Studying Mitosis in the Drosophila melanogaster Syncytial Embryo

This protocol describes the use of microinjection and high resolution imaging in the Drosophila melanogaster syncytial embryo to study mitosis.

Microinjection Techniques for Studying Mitosis in the Drosophila melanogaster Syncytial Embryo

This protocol describes the use of the Drosophila melanogaster syncytial embryo  for studying mitosis1.  Drosophila has useful genetics with a sequenced ...

microinjection-techniques-for-studying-mitosis-drosophila

Research

JoVE Journal

Biology

14.1K 次观看.  University of California, Davis. 本协议描述了利用显微注射和高分辨率成像果蝇

视频: Microinjection Techniques for Studying Mitosis in the Drosophila melanogaster Syncytial Embryo

Use of Drosophila S2 Cells for Live Imaging of Cell Division

Drosophila S2 cells are an important tool in studying mitosis in tissue culture, providing molecular insights into this fundamental cellular process in a rapid and high-throughput manner. S2 cells have proven amenable to both fixed- and live-cell imaging applications. Notably, live-cell imaging can yield valuable information about how loss or knockdown of a gene can affect the kinetics and dynamics of key events during cell division, including mitotic spindle assembly, chromosome congression, and segregation, as well as overall cell cycle timing. Here we utilize S2 cells stably transfected with fluorescently tagged mCherry:&#945;-tubulin to mark the mitotic spindle and GFP:CENP-A (referred to as &#8216;CID&#8217; gene in Drosophila) to mark the centromere to analyze the effects of key mitotic genes on the timing of cell divisions, from prophase (specifically at Nuclear Envelope Breakdown; NEBD) to the onset of anaphase. This imaging protocol also allows for the visualization of the spindle microtubule and chromosome dynamics throughout mitosis. Herein, we aim to provide a simple yet comprehensive protocol that will allow readers to easily adapt S2 cells for live imaging experiments. Results obtained from such experiments should expand our understanding of genes involved in the cell division by defining their role in several simultaneous and dynamic events. Observations made in this cell culture system can be validated and further investigated in vivo using the impressive toolkit of genetic approaches in flies.

Use of Drosophila S2 Cells for Live Imaging of Cell Division

Cell divisions can be visualized in real time using fluorescently tagged proteins and time-lapse microscopy. Using the protocol presented here, users can analyze cell division timing dynamics, mitotic spindle assembly, and chromosome congression and segregation. Defects in these events following RNA interference (RNAi)-mediated gene knockdown can be assessed and quantified.

Drosophila S2 cells are an important tool in studying mitosis in tissue culture, providing molecular insights into this fundamental cellular process in a ...

Genetics

phiC31 Integrase-Mediated Embryo Transgenesis in &lt;i&gt;Drosophila&lt;/i&gt;

Embryo Microinjection for Transgenesis in Drosophila

Transgenesis in Drosophila is an essential approach to studying gene function at the organism level. Embryo microinjection is a crucial step for the construction of transgenic flies. Microinjection requires some types of equipment, including a microinjector, a micromanipulator, an inverted microscope, and a stereo microscope.&#160;Plasmids isolated with a plasmid miniprep kit are qualified for microinjection. Embryos at the pre-blastoderm or syncytial blastoderm stage, where nuclei share a common cytoplasm, are subjected to microinjection. A cell strainer eases the process of dechorionating embryos. The optimal time for dechorionation and desiccation of embryos needs to be determined experimentally. To increase the efficiency of embryo microinjection, needles prepared by a puller need to be beveled by a needle grinder. In the process of grinding needles, we utilize a foot air pump with a pressure gauge to avoid the capillary effect of the needle tip. We routinely inject 120-140 embryos for each plasmid and obtain at least one transgenic line for around 85% of plasmids. This article takes the phiC31 integrase-mediated transgenesis in Drosophila as an example and&#160;presents a detailed protocol for embryo microinjection for transgenesis in Drosophila.

Author Spotlight: Optimizing Embryo Microinjection for Transgenesis in &lt;i&gt;Drosophila&lt;/i&gt;

This article takes the phiC31 integrase-mediated transgenesis in Drosophila as an example and presents an optimized protocol for embryo microinjection,&#160;a crucial step for creating transgenic flies.

Transgenesis in Drosophila is an essential approach to studying gene function at the organism level. Embryo microinjection is a crucial step for the ...

Imaging Intranuclear Actin Rods in Live Heat Stressed Drosophila Embryos

The purpose of this protocol is to visualize intranuclear actin rods that assemble in live Drosophila melanogaster embryos following heat stress. Actin rods are a hallmark of a conserved, inducible Actin Stress Response (ASR) that accompanies human pathologies, including neurodegenerative disease. Previously, we showed that the ASR contributes to morphogenesis failures and reduced viability of developing embryos. This protocol allows the continued study of mechanisms underlying actin rod assembly and the ASR in a model system that is highly amenable to imaging, genetics and biochemistry. Embryos are collected and mounted on a coverslip to prepare them for injection. Rhodamine-conjugated globular actin (G-actinRed) is diluted and loaded into a microneedle. A single injection is made into the center of each embryo. After injection, embryos are incubated at elevated temperature and intranuclear actin rods are then visualized by confocal microscopy. Fluorescence recovery after photobleaching (FRAP) experiments may be performed on the actin rods; and other actin-rich structures in the cytoplasm can also be imaged. We find that G-actinRed polymerizes like endogenous G-actin and does not, on its own, interfere with normal embryo development. One limitation of this protocol is that care must be taken during injection to avoid serious injury to the embryo. However, with practice, injecting G-actinRed into Drosophila embryos is a fast and reliable way to visualize actin rods and can easily be used with flies of any genotype or with the introduction of other cellular stresses, including hypoxia and oxidative stress.

Imaging Intranuclear Actin Rods in Live Heat Stressed Drosophila Embryos

The goal of this protocol is to inject Rhodamine-conjugated globular actin into Drosophila embryos and image intranuclear actin rod assembly following heat stress.

The purpose of this protocol is to visualize intranuclear actin rods that assemble in live Drosophila melanogaster embryos following heat stress. Actin ...

Developmental Biology

Drosophila Embryo Preparation and Microinjection for Live Cell Microscopy Performed using an Automated High Content Analyzer

Modern approaches in quantitative live cell imaging have become an essential tool for exploring cell biology, by enabling the use of statistics and computational modeling to classify and compare biological processes. Although cell culture model systems are great for high content imaging, high throughput studies of cell morphology suggest that ex vivo cultures are limited in recapitulating the morphological complexity found in cells within living organisms. As such, there is a need for a scalable high throughput model system to image living cells within an intact organism. Described here is a protocol for using a high content image analyzer to simultaneously acquire multiple time-lapse videos of embryonic Drosophila melanogaster development during the syncytial blastoderm stage. The syncytial blastoderm has traditionally served as a great in vivo model for imaging biological events; however, obtaining a significant number of experimental replicates for quantitative and high-throughput approaches has been labor intensive and limited by the imaging of a single embryo per experimental repeat. Presented here is a method to adapt imaging and microinjection approaches to suit a high content imaging system, or any inverted microscope capable of automated multipoint acquisition. This approach enables the simultaneous acquisition of 6-12 embryos, depending on desired acquisition factors, within a single imaging session.

Presented here is a protocol to microinject and simultaneously image multiple Drosophila embryos during embryonic development using a plate-based, high content imager.

Modern approaches in quantitative live cell imaging have become an essential tool for exploring cell biology, by enabling the use of statistics and ...

Visualizing Cytoskeleton-Dependent Trafficking of Lipid-Containing Organelles in Drosophila Embryos

Early Drosophila embryos are large cells containing a vast array of conventional and embryo-specific organelles. During the first three hours of embryogenesis, these organelles undergo dramatic movements powered by actin-based cytoplasmic streaming and motor-driven trafficking along microtubules. The development of a multitude of small, organelle-specific fluorescent probes (FPs) makes it possible to visualize a wide range of different lipid-containing structures in any genotype, allowing live imaging without requiring a genetically encoded fluorophore. This protocol shows how to inject vital dyes and molecular probes into Drosophila embryos to monitor the trafficking of specific organelles by live imaging. This approach is demonstrated by labeling lipid droplets (LDs) and following their bulk movement by particle image velocimetry (PIV). This protocol provides a strategy amenable to the study of other organelles, including lysosomes, mitochondria, yolk vesicles, and the ER, and for tracking the motion of individual LDs along microtubules. Using commercially available dyes brings the benefits of separation into the violet/blue and far-red regions of the spectrum. By multiplex co-labeling of organelles and/or cytoskeletal elements via microinjection, all the genetic resources in Drosophila are available for trafficking studies without the need to introduce fluorescently tagged proteins. Unlike genetically encoded fluorophores, which have low quantum yields and bleach easily, many of the available dyes allow for rapid and simultaneous capture of several channels with high photon yields.

Visualizing Cytoskeleton-Dependent Trafficking of Lipid-Containing Organelles in Drosophila Embryos

In the early Drosophila embryo, many organelles are motile. In principle, they can be imaged live via specific fluorescent probes, but the eggshell prevents direct application to the embryo. This protocol describes how to introduce such probes via microinjection, and then analyze bulk organelle motion via particle image velocimetry.

Early Drosophila embryos are large cells containing a vast array of conventional and embryo-specific organelles. During the first three hours of ...

Studying Mitotic Checkpoint by Illustrating Dynamic Kinetochore Protein Behavior and Chromosome Motion in Living Drosophila Syncytial Embryos

The spindle assembly checkpoint (SAC) mechanism is an active signal, which monitors the interaction between chromosome kinetochores and spindle microtubules to prevent anaphase onset until the chromosomes are properly connected. Cells use this mechanism to prevent aneuploidy or genomic instability, and hence cancers and other human diseases like birth defects and Alzheimer's1. A number of the SAC components such as Mad1, Mad2, Bub1, BubR1, Bub3, Mps1, Zw10, Rod and Aurora B kinase have been identified and they are all kinetochore dynamic proteins2. Evidence suggests that the kinetochore is where the SAC signal is initiated. The SAC prime regulatory target is Cdc20. Cdc20 is one of the essential APC/C (Anaphase Promoting Complex or Cyclosome) activators3 and is also a kinetochore dynamic protein4-6. When activated, the SAC inhibits the activity of the APC/C to prevent the destruction of two key substrates, cyclin B and securin, thereby preventing the metaphase to anaphase transition7,8. Exactly how the SAC signal is initiated and assembled on the kinetochores and relayed onto the APC/C to inhibit its function still remains elusive.
Drosophila is an extremely tractable experimental system; a much simpler and better-understood organism compared to the human but one that shares fundamental processes in common. It is, perhaps, one of the best organisms to use for bio-imaging studies in living cells, especially for visualization of the mitotic events in space and time, as the early embryo goes through 13 rapid nuclear division cycles synchronously (8-10 minutes for each cycle at 25 &deg;C) and gradually organizes the nuclei in a single monolayer just underneath the cortex9.
Here, I present a bio-imaging method using transgenic Drosophila expressing GFP (Green Fluorescent Protein) or its variant-targeted proteins of interest and a Leica TCS SP2 confocal laser scanning microscope system to study the SAC function in flies, by showing images of GFP fusion proteins of some of the SAC components, Cdc20 and Mad2, as the example.

Studying Mitotic Checkpoint by Illustrating Dynamic Kinetochore Protein Behavior and Chromosome Motion in Living Drosophila Syncytial Embryos

The kinetochore is where the SAC initiates its signal monitoring the mitotic segregation of the sister chromatids. A method is described to visualize the recruitment and turnover of one of the kinetochore proteins and its coordination with the chromosome motion in Drosophila embryos using a Leica laser scanning confocal system.

The spindle assembly checkpoint (SAC) mechanism is an active signal, which monitors the interaction between chromosome kinetochores and spindle ...

Imaging Through the Pupal Case of Drosophila melanogaster

The longstanding use of Drosophila as a model for cell and developmental biology has yielded an array of tools. Together, these techniques have enabled analysis of cell and developmental biology from a variety of methodological angles. Live imaging is an emerging method for observing dynamic cell processes, such as cell division or cell motility. Having isolated mutations in uncharacterized putative cell cycle proteins it became essential to observe mitosis in situ using live imaging. Most live imaging studies in Drosophila have focused on the embryonic stages that are accessible to manipulation and observation because of their small size and optical clarity. However, in these stages the cell cycle is unusual in that it lacks one or both of the gap phases. By contrast, cells of the pupal wing of Drosophila have a typical cell cycle and undergo a period of rapid mitosis spanning about 20 hr of pupal development. It is easy to identify and isolate pupae of the appropriate stage to catch mitosis in situ. Mounting intact pupae provided the best combination of tractability and durability during imaging, allowing experiments to run for several hours with minimal impact on cell and animal viability. The method allows observation of features as small as, or smaller than, fly chromosomes. Adjustment of microscope settings and the details of mounting, allowed extension of the preparation to visualize membrane dynamics of adjacent cells and fluorescently labeled proteins such as tubulin. This method works for all tested fluorescent proteins and can capture submicron scale features over a variety of time scales. While limited to the outer 20 &#181;m of the pupa with a conventional confocal microscope, this approach to observing protein and cellular dynamics in pupal tissues in vivo may be generally useful in the study of cell and developmental biology in these tissues.

Imaging Through the Pupal Case of Drosophila melanogaster

This paper demonstrates the use of a fast scanning confocal microscope to image cell behavior directly through the puparium. By leaving the pupal case intact, this method allows observation and measurement of dynamic cell processes at a stage of Drosophila development that is difficult to study directly.

The longstanding use of Drosophila as a model for cell and developmental biology has yielded an array of tools. Together, these techniques have enabled ...

Techniques for Imaging Prometaphase and Metaphase of Meiosis I in Fixed Drosophila Oocytes

Chromosome segregation in human oocytes is error prone, resulting in aneuploidy, which is the leading genetic cause of miscarriage and birth defects. The study of chromosome behavior in oocytes from model organisms holds much promise to uncover the molecular basis of the susceptibility of human oocytes to aneuploidy. Drosophila melanogaster is amenable to genetic manipulation, with over 100 years of research, community, and technique development. Visualizing chromosome behavior and spindle assembly in Drosophila oocytes has particular challenges, however, due primarily to the presence of membranes surrounding the oocyte that are impenetrable to antibodies. We describe here protocols for the collection, preparation, and imaging of meiosis I spindle assembly and chromosome behavior in Drosophila oocytes, which allow the molecular dissection of chromosome segregation in this important model organism.

Techniques for Imaging Prometaphase and Metaphase of Meiosis I in Fixed Drosophila Oocytes

We present protocols for the collection, preparation, and imaging of mature Drosophila oocytes. These methods allow the visualization of chromosome behavior and spindle assembly and function during meiosis.

Chromosome segregation in human oocytes is error prone, resulting in aneuploidy, which is the leading genetic cause of miscarriage and birth defects. The ...

Visualizing and Tracking Endogenous mRNAs in Live Drosophila melanogaster Egg Chambers

Fluorescence-based imaging techniques, in combination with developments in light microscopy, have revolutionized how cell biologists conduct live cell imaging studies. Methods for detecting RNAs have expanded greatly since seminal studies linked site-specific mRNA localization to gene expression regulation. Dynamic mRNA processes can now be visualized via approaches that detect mRNAs, coupled with microscopy set-ups that are fast enough to capture the dynamic range of molecular behavior. The molecular beacon technology is a hybridization-based approach capable of direct detection of endogenous transcripts in living cells. Molecular beacons are hairpin-shaped, internally quenched, single-nucleotide discriminating nucleic acid probes, which fluoresce only upon hybridization to a unique target sequence. When coupled with advanced fluorescence microscopy and high-resolution imaging, they enable one to perform spatial and temporal tracking of intracellular movement of mRNAs. Although this technology is the only method capable of detecting endogenous transcripts, cell biologists have not yet fully embraced this technology due to difficulties in designing such probes for live cell imaging. A new software application, PinMol, allows for enhanced and rapid design of probes best suited to efficiently hybridize to mRNA target regions within a living cell. In addition, high-resolution, real-time image acquisition and current, open source image analysis software allow for a refined data output, leading to a finer evaluation of the complexity underlying the dynamic processes involved in the mRNA&#39;s life cycle.
Here we present a comprehensive protocol for designing and delivering molecular beacons into Drosophila melanogaster egg chambers. Direct and highly specific detection and visualization of endogenous maternal mRNAs is performed via spinning disc confocal microscopy. Imaging data is processed and analyzed using object detection and tracking in Icy software to obtain details about the dynamic movement of mRNAs, which are transported and localized to specialized regions within the oocyte.

Visualizing and Tracking Endogenous mRNAs in Live Drosophila melanogaster Egg Chambers

Here, we present a protocol for the visualization, detection, analysis and tracking of endogenous mRNA trafficking in live Drosophila melanogaster egg chamber using molecular beacons, spinning disc confocal microscopy, and open-source analysis software.

Fluorescence-based imaging techniques, in combination with developments in light microscopy, have revolutionized how cell biologists conduct live cell ...

Microinjection of Drosophila Nurse Cells: A Method of Intracellular Delivery

Source: Catrina, I. E., et al. <a href="https://www.jove.com/video/58545/" target="_blank">Visualizing and Tracking Endogenous mRNAs in Live Drosophila melanogaster Egg Chambers</a>. J. Vis. Exp. (2019).
Due to their large size and relatively simple organization, Drosophila nurse cells are ideally suited for live cell imaging studies. This video describes a microinjection method for exogenous compounds delivery into the cells, and the featured protocol demonstrates the procedure with fluorescent oligonucleotide probes called molecular beacons (MBs) used to visualize endogenous mRNA transcripts.

Source: Catrina, I. E., et al. Visualizing and Tracking Endogenous mRNAs in Live Drosophila melanogaster Egg Chambers. J. Vis. Exp. (2019).
Due to their ...