This work was supported by the NIH grants R01NS046835 and R01AG034389, and the March of Dimes grant 6FY08-322. A special thank you is devoted to Mrs. Eleanor Brown (Miltenyi Biotec, Auburn, CA) who helped tremendously with her insight into the MACS technology. Miltenyi has generously provided the material used for the demonstration of the experiments at no cost. I am also grateful to Dr. Guanghu Wang (Medical College of Georgia/Georgia Health Sciences University, Augusta, GA) who generated the PKC&#950; expressing cell lines. Support by the Institute of Molecular Medicine at the Medical College of Georgia/Georgia Health Sciences University (under directorship of Dr. Lin Mei) is also acknowledged.

1. Introduction
The lipid vesicle-mediated affinity chromatography using magnetic-activated cell sorting (LIMACS) technique was developed in our laboratory to isolate ceramide-associated protein complexes 1-3. Originally, the lipid vesicles were made of ceramide and phosphatidylserine, which allowed for MACS using magnetic particle-conjugated Annexin V (highly affine to phosphatidylserine) to isolate the vesicles and their associated proteins. We have used the LIMACS technique for the in vitro reconstitution of a ceramide-associated polarity complex and the isolation of ceramide-binding proteins from cell lysates 3. LIMACS can be modified using other interaction partners for the isolation of the vesicles (e.g., glycolipid-specifc lectins or lipid antibodies).
2. Experimental Procedures
Preparation of Lipid Vesicles and aPKCBinding Assays
<ol>
	<li>Lipid vesicles are obtained from dried mixtures of equimolar amounts of phosphatidylserine (105 &mu;g) and C16-ceramide (85 &mu;g) following modified procedures for large liposome preparation 1,4-7.</li>
	<li>The lipid mixtures are then resuspended and sonicated for 1 h in 100 &mu;l of vesicle buffer consisting of 50 mM Tris/HCl (pH 7.5) and 150 mM NaCl.</li>
	<li>After adding 300 &mu;l of vesicle buffer supplemented with 0.1 mM MnCl2, the samples are centrifuged at 12,000 &mu;g for 20 min at 4 &deg;C.</li>
	<li>The pellet (large lipid vesicles) is resuspended in 100 &mu;l of vesicle buffer and incubated with 1 nmol of Vybrant CM-diI for 1 h at 37 &deg;C to visualize the vesicle fraction after MACS separation. Vybrant CM-diI is a red fluorescent dye specifically incorporating into lipid membranes.</li>
	<li>A detergent-free cell lysate is prepared by sonication/homogenization of cells in 300 &mu;l of hypotonic buffer (10 mM Tris/HCl (pH 7.0) with protease and phosphatase inhibitors) followed by removal of membranous debris by centrifugation. A centrifugation step at 100,000xg for 1 h should be added to avoid contamination of the cell lysate with endogenous membranes containing phosphatidylserine.</li>
	<li>The cleared lysate is added to the lipid vesicle suspension, and the mixture is incubated for 2 h at 4 &deg;C.</li>
	<li>The reaction mixture is supplemented with 20 &mu;l of 20x Annexin V binding buffer and 50 &mu;l of a solution containing magnetic beads conjugated to Annexin V followed by incubation for 1 h at 4 &deg;C.</li>
	<li>MACS is performed according to the manufacturer's (Miltenyi Biotec, Inc.) protocol. The presence and quantity of lipid vesicles is determined by monitoring the Vybrant CM-diI fluorescence in the flow-through and elution fractions using a microplate fluorescence reader.</li>
	<li>The linear correlation between the amount of vesicular lipid and fluorescence intensity of vesicle-bound Vybrant CM-diI is verified by quantitative high-performance thin-layer chromatography (HPTLC) of the lipid mixture applied to Annexin V-based MACS.</li>
	<li>The specificity of the binding reaction of aPKC or other proteins to the ceramide/phosphatidylserine vesicles is verified by an antibody competition assay using 1 &mu;g of anti-PKC&#950; rabbit polyclonal antibody to incubate the cell lysate for 1 h at 4 &deg;C prior to incubation with the lipid vesicles.</li>
	<li>The protein binding to ceramide/phosphatidylserine vesicles in the MACS eluate is analyzed by SDS-PAGE and immunoblotting.</li>
</ol>
In vitro lipid-protein polarity complex
<ol>
	<li>The in vitro reconstitution of a lipid-protein polarity complex is performed following the LIMACS procedure as described in the previous section. In brief, phosphatidylserine (420 &mu;g) and C16-ceramide (107 &mu;g) is dried from organic solvent.</li>
	<li>The dried lipids are resuspended under sonication in 500 &mu;l of vesicle buffer (50 mM Tris/HCl, pH 7.5; 150 mM NaCl).</li>
	<li>Five &mu;l of 10 mM MnCl2, 1 &mu;l of Vybrant CM-diI, and 500 ng of PKC&#950; (human recombinant) is added and the reaction mixture incubated undergentle agitation for 60 min at 4 &deg;C.</li>
	<li>Vybrant CM-diI stained phosphatidylserine/ceramide vesicles are recovered by centrifugation at 12,000xg for 60 min at 4 &deg;C.</li>
	<li>The pellet (pink) is resuspended in 100 &mu;l Tris buffer and supplemented with &gamma;S-GTP (100 &mu;M), GDP (1 mM), GST-Par6 (100 ng), or GST-Cdc42 (500 ng) and further incubated for 3 h at 4 &deg;C (any other combination of recombinant proteins of interest can be used here).</li>
	<li>Annexin V-buffer (5 &mu;l of a 20x stock solution) and Annexin V-conjugated magnetic beads (50 &mu;l) are added and the reaction mixture incubated under gentle agitation for another 30 min at 4 &deg;C.</li>
	<li>Annexin V-MACS is performed following the supplier's protocol as described previously.</li>
	<li>The elution fraction (1 ml) is supplemented with 10 &mu;g of pure ovalbumin as precipitation aid. The protein is concentrated by Wessel-Flugge precipitation and analyzed by SDS-PAGE/immunoblotting as previously described 8.</li>
	<li>The amount of eluted lipid vesicles is quantified by the detection of Vybrant CM-diI (pink) in the organic (chloroform/methanol) phase of the Wessel Flugge precipitation reaction. The amount of protein analyzed is normalized on equal amounts of lipid vesicles.</li>
</ol>
3. Results
LIMACS purification of PKC&#950;-EGFP and the ceramide binding domain C20&#950;-EGFP
A detergent-free lysate of MDCK cells expressing full length PKC&#950; C-terminally linked to green fluorescent protein (FL&#950;-EGFP) or a ceramide binding domain in the C-terminus of PKC&#950; (C20&#950;-EGFP) was incubated with phosphatidylserine/ceramide vesicles as described in Experimental Procedures. After elution of the MACS column, protein was analyzed using immunoblotting and antibodies against PKC&#950; and EGFP for detection of the eluted protein 2.
<img src="/files/ftp_upload/2657/2657fig1.jpg" alt="Figure 1" /> Figure 1. LIMACS of EGFP-labeled PKC&#950; and its C-terminal fragment C20&#950; using phosphatidylserine/ceramide vesicles.
 Detergent-free lysates of MDCK cells expressing EGFP (as a non-binding control), full length PKC&zeta;-EGFP, or the ceramide binding, C-terminal fragment C20&#950;-EGFP were incubated with phosphatidylserine/ceramide vesicles as described in the Experimental Procedures section. After using LIMACS, protein was eluted with SDS sample buffer and analyzed by SDS-PAGE and immunoblotting. The left panel shows that EGFP did not bind to the vesicles retained with the Annexin V-linked magnetic beads. The middle and right panel shows that full length PKC&#950;-EGFP and C20&#950;-EGFP were retained due to binding to ceramide.

<ol>
	<li>Wang, G. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Direct+binding+to+ceramide+activates+protein+kinase+Czeta+before+the+formation+of+a+pro-apoptotic+complex+with+PAR-4+in+differentiating+stem+cells.">Direct binding to ceramide activates protein kinase Czeta before the formation of a pro-apoptotic complex with PAR-4 in differentiating stem cells.</a> J Biol Chem. 280, 26415-26424 (2005).</li><li>Wang, G., Krishnamurthy, K., Umapathy, N. S., Verin, A. D., Bieberich, E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=The+carboxyl-terminal+domain+of+atypical+protein+kinase+Czeta+binds+to+ceramide+and+regulates+junction+formation+in+epithelial+cells.">The carboxyl-terminal domain of atypical protein kinase Czeta binds to ceramide and regulates junction formation in epithelial cells.</a> J Biol Chem. 284, 14469-14475 (2008).</li><li>Chalfant, C. E. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=De+novo+ceramide+regulates+the+alternative+splicing+of+caspase+9+and+Bcl-x+in+A549+lung+adenocarcinoma+cells.+Dependence+on+protein+phosphatase-1.">De novo ceramide regulates the alternative splicing of caspase 9 and Bcl-x in A549 lung adenocarcinoma cells. Dependence on protein phosphatase-1.</a> J Biol Chem. 277, 12587-12595 (2002).</li><li>Simon, C. G., Holloway, P. W., Gear, A. R. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Exchange+of+C(16)-ceramide+between+phospholipid+vesicles.">Exchange of C(16)-ceramide between phospholipid vesicles.</a> Biochemistry. 38, 14676-14682 (1999).</li><li>Goni, F. M., Contreras, F. X., Montes, L. R., Sot, J., Alonso, A. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Biophysics+(and+sociology)+of+ceramides.">Biophysics (and sociology) of ceramides.</a> Biochem Soc Symp. , 177-188 (2005).</li><li>Kumagai, K. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=CERT+mediates+intermembrane+transfer+of+various+molecular+species+of+ceramides.">CERT mediates intermembrane transfer of various molecular species of ceramides.</a> J Biol Chem. 280, 6488-6495 (2005).</li><li>Wessel, D., Flugge, U. I. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=A+method+for+the+quantitative+recovery+of+protein+in+dilute+solution+in+the+presence+of+detergents+and+lipids.">A method for the quantitative recovery of protein in dilute solution in the presence of detergents and lipids.</a> Anal Biochem. 138, 141-143 (1984).</li></ol>

No conflicts of interest declared.

To test the specific interaction between a lipid and its binding protein is hampered by embedding of lipids in the cell membrane. The cell membrane consists of a mixture of several lipids and proteins and it is organized in lipid microdomains or rafts. Therefore, the co-purification of microdomains and proteins cannot clearly distinguish if a protein directly binds to a lipid or is only enriched in a microdomain structure. Other methods using defined lipids coated on surfaces such as lipid ELISAs or Plasmon resonance spe...

Annexin V-conjugated magnetic beads and MACS micro and minicolumns were provided by Miltenyi Biotec, Inc. (Auburn, CA). All lipids were of highest purity and obtained from Avanti Polar Lipids (Alabaster, AL).

lipid vesicle-mediated affinity chromatography using magnetic activated cell sorting (limacs): a novel method to analyze protein-lipid interaction

The analysis of lipid protein interaction is difficult because lipids are embedded in cell membranes and therefore, inaccessible to most purification procedures. As an alternative, lipids can be coated on flat surfaces as used for lipid ELISA and Plasmon resonance spectroscopy. However, surface coating lipids do not form microdomain structures, which may be important for the lipid binding properties. Further, these methods do not allow for the purification of larger amounts of proteins binding to their target lipids.
 To overcome these limitations of testing lipid protein interaction and to purify lipid binding proteins we developed a novel method termed lipid vesicle-mediated affinity chromatography using magnetic-activated cell sorting (LIMACS). In this method, lipid vesicles are prepared with the target lipid and phosphatidylserine as the anchor lipid for Annexin V MACS. Phosphatidylserine is a ubiquitous cell membrane phospholipid that shows high affinity to the protein Annexin V. Using magnetic beads conjugated to Annexin V the phosphatidylserine-containing lipid vesicles will bind to the magnetic beads. When the lipid vesicles are incubated with a cell lysate the protein binding to the target lipid will also be bound to the beads and can be co-purified using MACS. This method can also be used to test if recombinant proteins reconstitute a protein complex binding to the target lipid. 
 We have used this method to show the interaction of atypical PKC (aPKC) with the sphingolipid ceramide and to co-purify prostate apoptosis response 4 (PAR-4), a protein binding to ceramide-associated aPKC. We have also used this method for the reconstitution of a ceramide-associated complex of recombinant aPKC with the cell polarity-related proteins Par6 and Cdc42. Since lipid vesicles can be prepared with a variety of sphingo- or phospholipids, LIMACS offers a versatile test for lipid-protein interaction in a lipid environment that resembles closely that of the cell membrane. Additional lipid protein complexes can be identified using proteomics analysis of lipid binding protein co-purified with the lipid vesicles.

Watch this Scientific Journal Video about Lipid Vesicle-mediated Affinity Chromatography using Magnetic Activated Cell Sorting LIMACS: a Novel Method to Analyze Protein-lipid Interaction at JoVE.com

Lipid Vesicle-mediated Affinity Chromatography using Magnetic Activated Cell Sorting LIMACS: a Novel Method to Analyze Protein-lipid Interaction

To test the interaction of a protein with its target lipid we used MACS and Annexin V-conjugated magnetic beads and lipid vesicles synthesized from the target lipid and Annexin V-binding phosphatidylserine. Proteins bound to the target lipid are co-purified and analyzed after elution from the beads.

Lipid Vesicle-mediated Affinity Chromatography using Magnetic Activated Cell Sorting (LIMACS): a Novel Method to Analyze Protein-lipid Interaction

The analysis of lipid protein interaction is difficult because lipids are embedded in cell membranes and therefore, inaccessible to most purification ...

lipid-vesicle-mediated-affinity-chromatography-using-magnetic

Research

JoVE Journal

Biology

12.4K 次观看.  Georgia Health Sciences University. 为了测试我们使用Macs和Annexin V的共轭磁珠和目标脂质和Annexin V的具有约束力的磷脂酰丝氨酸合成脂质囊泡与目标脂质的一种蛋白质的相互作用。绑定到目标脂质蛋白质纯化和分析后，从珠洗脱。

视频: Lipid Vesicle-mediated Affinity Chromatography using Magnetic Activated Cell Sorting LIMACS: a Novel Method to Analyze Protein-lipid Interaction

Fluorescence Activated Cell Sorting of Plant Protoplasts

High-resolution, cell type-specific analysis of gene expression greatly enhances understanding of developmental regulation and responses to environmental stimuli in any multicellular organism. In situ hybridization and reporter gene visualization can to a limited extent be used to this end but for high resolution quantitative RT-PCR or high-throughput transcriptome-wide analysis the isolation of RNA from particular cell types is requisite. Cellular dissociation of tissue expressing a fluorescent protein marker in a specific cell type and subsequent Fluorescence Activated Cell Sorting (FACS) makes it possible to collect sufficient amounts of material for RNA extraction, cDNA synthesis/amplification and microarray analysis.
An extensive set of cell type-specific fluorescent reporter lines is available to the plant research community. In this case, two marker lines of the Arabidopsis thaliana root are used: PSCR::GFP (endodermis and quiescent center) and PWOX5::GFP (quiescent center). Large numbers (thousands) of seedlings are grown hydroponically or on agar plates and harvested to obtain enough root material for further analysis. Cellular dissociation of plant material is achieved by enzymatic digestion of the cell wall. This procedure makes use of high osmolarity-induced plasmolysis and commercially available cellulases, pectinases and hemicellulases to release protoplasts into solution.
FACS of GFP-positive cells makes use of the visualization of the green versus the red emission spectra of protoplasts excited by a 488 nm laser. GFP-positive protoplasts can be distinguished by their increased ratio of green to red emission. Protoplasts are typically sorted directly into RNA extraction buffer and stored for further processing at a later time.
This technique is revealed to be straightforward and practicable. Furthermore, it is shown that it can be used without difficulty to isolate sufficient numbers of cells for transcriptome analysis, even for very scarce cell types (e.g. quiescent center cells). Lastly, a growth setup for Arabidopsis seedlings is demonstrated that enables uncomplicated treatment of the plants prior to cell sorting (e.g. for the cell type-specific analysis of biotic or abiotic stress responses). Potential supplementary uses for FACS of plant protoplasts are discussed.

A method for isolating specific cell types from plant material is demonstrated. This technique employs transgenic marker lines expressing fluorescent proteins in particular cell types, cellular dissociation and Fluorescence Activated Cell Sorting. Additionally, a growth setup is established here that facilitates treatment of Arabidopsis thaliana seedlings prior to cell sorting.

High-resolution, cell type-specific analysis of gene expression greatly enhances understanding of developmental regulation and responses to environmental ...

Isolation of Labile Multi-protein Complexes by in vivo Controlled Cellular Cross-Linking and Immuno-magnetic Affinity Chromatography

The dynamic nature of cellular machineries is frequently built on transient and/or weak protein associations. These low affinity interactions preclude stringent methods for the isolation and identification of protein networks around a protein of interest. The use of chemical crosslinkers allows the selective stabilization of labile interactions, thus bypassing biochemical limitations for purification. Here we present a protocol amenable for cells in culture that uses a homobifunctional crosslinker with a spacer arm of 12 &Aring;, dithiobis-(succinimidyl proprionate) (DSP). DSP is cleaved by reduction of a disulphide bond present in the molecule. Cross-linking combined with immunoaffinity chromatography of proteins of interest with magnetic beads allows the isolation of protein complexes that otherwise would not withstand purification. This protocol is compatible with regular western blot techniques and it can be scaled up for protein identification by mass spectrometry1.
Stephanie A. Zlatic and Pearl V. Ryder contributed equally to this work.

Isolation of Labile Multi-protein Complexes by in vivo Controlled Cellular Cross-Linking and Immuno-magnetic Affinity Chromatography

The cell permeable crosslinker DSP [dithiobis-(succinimidyl propionate)] stabilizes transient and labile interactions in vivo, which allows their isolation using stringent protein complex purification techniques. Here we present a technique for crosslinking cells grown in culture followed by isolation of protein complexes by immunoprecipitation.

The dynamic nature of cellular machineries is frequently built on transient and/or weak protein associations. These low affinity interactions preclude ...

Avidity-based Extracellular Interaction Screening (AVEXIS) for the Scalable Detection of Low-affinity Extracellular Receptor-Ligand Interactions

Extracellular protein:protein interactions between secreted or membrane-tethered proteins are critical for both initiating intercellular communication and ensuring cohesion within multicellular organisms. Proteins predicted to form extracellular interactions are encoded by approximately a quarter of human genes1, but despite their importance and abundance, the majority of these proteins have no documented binding partner. Primarily, this is due to their biochemical intractability: membrane-embedded proteins are difficult to solubilise in their native conformation and contain structurally-important posttranslational modifications. Also, the interaction affinities between receptor proteins are often characterised by extremely low interaction strengths (half-lives &lt; 1 second) precluding their detection with many commonly-used high throughput methods2. 
Here, we describe an assay, AVEXIS (AVidity-based EXtracellular Interaction Screen) that overcomes these technical challenges enabling the detection of very weak protein interactions (t1/2 &le; 0.1 sec) with a low false positive rate3. The assay is usually implemented in a high throughput format to enable the systematic screening of many thousands of interactions in a convenient microtitre plate format (Fig. 1). It relies on the production of soluble recombinant protein libraries that contain the ectodomain fragments of cell surface receptors or secreted proteins within which to screen for interactions; therefore, this approach is suitable for type I, type II, GPI-linked cell surface receptors and secreted proteins but not for multipass membrane proteins such as ion channels or transporters.
The recombinant protein libraries are produced using a convenient and high-level mammalian expression system4, to ensure that important posttranslational modifications such as glycosylation and disulphide bonds are added. Expressed recombinant proteins are secreted into the medium and produced in two forms: a biotinylated bait which can be captured on a streptavidin-coated solid phase suitable for screening, and a pentamerised enzyme-tagged (&beta;-lactamase) prey. The bait and prey proteins are presented to each other in a binary fashion to detect direct interactions between them, similar to a conventional ELISA (Fig. 1). The pentamerisation of the proteins in the prey is achieved through a peptide sequence from the cartilage oligomeric matrix protein (COMP) and increases the local concentration of the ectodomains thereby providing significant avidity gains to enable even very transient interactions to be detected. By normalising the activities of both the bait and prey to predetermined levels prior to screening, we have shown that interactions having monomeric half-lives of 0.1 sec can be detected with low false positive rates3.

Avidity-based Extracellular Interaction Screening AVEXIS for the Scalable Detection of Low-affinity Extracellular Receptor-Ligand Interactions

AVEXIS is a high throughput protein interaction assay developed to systematically screen for novel extracellular receptor-ligand pairs involved in cellular recognition processes. It is specifically designed to detect transient protein interactions that are difficult to identify using other high throughput approaches.

Extracellular protein:protein interactions between secreted or membrane-tethered proteins are critical for both initiating intercellular communication and ...

A Liquid Phase Affinity Capture Assay Using Magnetic Beads to Study Protein-Protein Interaction: The Poliovirus-Nanobody Example

In this article, a simple, quantitative, liquid phase affinity capture assay is presented. Provided that one protein can be tagged and another protein labeled, this method can be implemented for the investigation of protein-protein interactions. It is based on one hand on the recognition of the tagged protein by cobalt coated magnetic beads and on the other hand on the interaction between the tagged protein and a second specific protein that is labeled. First, the labeled and tagged proteins are mixed and incubated at room temperature. The magnetic beads, that recognize the tag, are added and the bound fraction of labeled protein is separated from the unbound fraction using magnets. The amount of labeled protein that is captured can be determined in an indirect way by measuring the signal of the labeled protein remained in the unbound fraction. The described liquid phase affinity assay is extremely useful when conformational conversion sensitive proteins are assayed. The development and application of the assay is demonstrated for the interaction between poliovirus and poliovirus recognizing nanobodies1. Since poliovirus is sensitive to conformational conversion2 when attached to a solid surface (unpublished results), the use of ELISA is limited and a liquid phase based system should therefore be preferred. An example of a liquid phase based system often used in polioresearch3,4 is the micro protein A-immunoprecipitation test5. Even though this test has proven its applicability, it requires an Fc-structure, which is absent in the nanobodies6,7. However, as another opportunity, these interesting and stable single-domain antibodies8 can be easily engineered with different tags. The widely used (His)6-tag shows affinity for bivalent ions such as nickel or cobalt, which can on their turn be easily coated on magnetic beads. We therefore developed this simple quantitative affinity capture assay based on cobalt coated magnetic beads. Poliovirus was labeled with 35S to enable unhindered interaction with the nanobodies and to make a quantitative detection feasible. The method is easy to perform and can be established with a low cost, which is further supported by the possibility of effectively regenerating the magnetic beads.

In this article, a simple, quantitative, liquid phase affinity capture assay is presented. It is a reliable technique based on the interaction between magnetic beads and tagged proteins (e.g. nanobodies) on one hand and the affinity between the tagged protein and a second, labeled protein (e.g. poliovirus) on the other.

In this article, a simple, quantitative, liquid phase affinity capture assay is presented. Provided that one protein can be tagged and another protein ...

Cell Specific Analysis of Arabidopsis Leaves Using Fluorescence Activated Cell Sorting

After initiation of the leaf primordium, biomass accumulation is controlled mainly by cell proliferation and expansion in the leaves1. However, the Arabidopsis leaf is a complex organ made up of many different cell types and several structures. At the same time, the growing leaf contains cells at different stages of development, with the cells furthest from the petiole being the first to stop expanding and undergo senescence1. Different cells within the leaf are therefore dividing, elongating or differentiating; active, stressed or dead; and/or responding to stimuli in sub-sets of their cellular type at any one time. This makes genomic study of the leaf challenging: for example when analyzing expression data from whole leaves, signals from genetic networks operating in distinct cellular response zones or cell types will be confounded, resulting in an inaccurate profile being generated.
To address this, several methods have been described which enable studies of cell specific gene expression. These include laser-capture microdissection (LCM)2 or GFP expressing plants used for protoplast generation and subsequent fluorescence activated cell sorting (FACS)3,4, the recently described INTACT system for nuclear precipitation5 and immunoprecipitation of polysomes6.
FACS has been successfully used for a number of studies, including showing that the cell identity and distance from the root tip had a significant effect on the expression profiles of a large number of genes3,7. FACS of GFP lines have also been used to demonstrate cell-specific transcriptional regulation during root nitrogen responses and lateral root development8, salt stress9 auxin distribution in the root10 and to create a gene expression map of the Arabidopsis shoot apical meristem11. Although FACS has previously been used to sort Arabidopsis leaf derived protoplasts based on autofluorescence12,13, so far the use of FACS on Arabidopsis lines expressing GFP in the leaves has been very limited4. In the following protocol we describe a method for obtaining Arabidopsis leaf protoplasts that are compatible with FACS while minimizing the impact of the protoplast generation regime. We demonstrate the method using the KC464 Arabidopsis line, which express GFP in the adaxial epidermis14, the KC274 line, which express GFP in the vascular tissue14 and the TP382 Arabidopsis line, which express a double GFP construct linked to a nuclear localization signal in the guard cells (data not shown; Figure 2). We are currently using this method to study both cell-type specific expression during development and stress, as well as heterogeneous cell populations at various stages of senescence.

Cell Specific Analysis of Arabidopsis Leaves Using Fluorescence Activated Cell Sorting

A method for producing Arabidopsis leaf protoplasts that are compatible with fluorescence activated cell sorting (FACS), allowing for studies of specific cell populations. This method is compatible with any Arabidopsis line that expresses GFP in a subset of cells.

After initiation of the leaf primordium, biomass accumulation is controlled mainly by cell proliferation and expansion in the leaves1. However, the ...

Optimized Staining and Proliferation Modeling Methods for Cell Division Monitoring using Cell Tracking Dyes

Fluorescent cell tracking dyes, in combination with flow and image cytometry, are powerful tools with which to study the interactions and fates of different cell types in vitro and in vivo.1-5 Although there are literally thousands of publications using such dyes, some of the most commonly encountered cell tracking applications include monitoring of:
<ol>
	<li>stem and progenitor cell quiescence, proliferation and/or differentiation6-8</li>
	<li>antigen-driven membrane transfer9 and/or precursor cell proliferation3,4,10-18 and</li>
	<li>immune regulatory and effector cell function1,18-21.</li>
</ol>
Commercially available cell tracking dyes vary widely in their chemistries and fluorescence properties but the great majority fall into one of two classes based on their mechanism of cell labeling. "Membrane dyes", typified by PKH26, are highly lipophilic dyes that partition stably but non-covalently into cell membranes1,2,11. "Protein dyes", typified by CFSE, are amino-reactive dyes that form stable covalent bonds with cell proteins4,16,18. Each class has its own advantages and limitations. The key to their successful use, particularly in multicolor studies where multiple dyes are used to track different cell types, is therefore to understand the critical issues enabling optimal use of each class2-4,16,18,24.
The protocols included here highlight three common causes of poor or variable results when using cell-tracking dyes. These are:
<ol>
	<li>Failure to achieve bright, uniform, reproducible labeling. This is a necessary starting point for any cell tracking study but requires attention to different variables when using membrane dyes than when using protein dyes or equilibrium binding reagents such as antibodies.</li>
	<li>Suboptimal fluorochrome combinations and/or failure to include critical compensation controls. Tracking dye fluorescence is typically 102 - 103 times brighter than antibody fluorescence. It is therefore essential to verify that the presence of tracking dye does not compromise the ability to detect other probes being used.</li>
	<li>Failure to obtain a good fit with peak modeling software. Such software allows quantitative comparison of proliferative responses across different populations or stimuli based on precursor frequency or other metrics. Obtaining a good fit, however, requires exclusion of dead/dying cells that can distort dye dilution profiles and matching of the assumptions underlying the model with characteristics of the observed dye dilution profile.</li>
</ol>
Examples given here illustrate how these variables can affect results when using membrane and/or protein dyes to monitor cell proliferation.

Successful use of cell tracking dyes to monitor immune cell function and proliferation involves several critical steps. We describe methods for: 1) obtaining bright, uniform, reproducible label-ing with membrane dyes; 2) selecting fluorochromes and data acquisition conditions; and 3) choosing a model to quantify cell proliferation based on dye dilution.

Fluorescent cell tracking dyes, in combination with flow and image cytometry, are powerful tools with which to study the interactions and fates of ...

Combining Magnetic Sorting of Mother Cells and Fluctuation Tests to Analyze Genome Instability During Mitotic Cell Aging in Saccharomyces cerevisiae

Saccharomyces cerevisiae has been an excellent model system for examining mechanisms and consequences of genome instability. Information gained from this yeast model is relevant to many organisms, including humans, since DNA repair and DNA damage response factors are well conserved across diverse species. However, S. cerevisiae has not yet been used to fully address whether the rate of accumulating mutations changes with increasing replicative (mitotic) age due to technical constraints. For instance, measurements of yeast replicative lifespan through micromanipulation involve very small populations of cells, which prohibit detection of rare mutations. Genetic methods to enrich for mother cells in populations by inducing death of daughter cells have been developed, but population sizes are still limited by the frequency with which random mutations that compromise the selection systems occur. The current protocol takes advantage of magnetic sorting of surface-labeled yeast mother cells to obtain large enough populations of aging mother cells to quantify rare mutations through phenotypic selections. Mutation rates, measured through fluctuation tests, and mutation frequencies are first established for young cells and used to predict the frequency of mutations in mother cells of various replicative ages. Mutation frequencies are then determined for sorted mother cells, and the age of the mother cells is determined using flow cytometry by staining with a fluorescent reagent that detects bud scars formed on their cell surfaces during cell division. Comparison of predicted mutation frequencies based on the number of cell divisions to the frequencies experimentally observed for mother cells of a given replicative age can then identify whether there are age-related changes in the rate of accumulating mutations. Variations of this basic protocol provide the means to investigate the influence of alterations in specific gene functions or specific environmental conditions on mutation accumulation to address mechanisms underlying genome instability during replicative aging.

Combining Magnetic Sorting of Mother Cells and Fluctuation Tests to Analyze Genome Instability During Mitotic Cell Aging in Saccharomyces cerevisiae

Mutation rates in young Saccharomyces cerevisiae cells measured through fluctuation tests are used to predict mutation frequencies for mother cells of different replicative ages. Magnetic sorting and flow cytometry are then used to measure actual mutation frequencies and age of mother cells to identify any deviations from predicted mutation frequencies.

Saccharomyces cerevisiae has been an excellent model system for examining mechanisms and consequences of genome instability. Information gained from this ...

Identification of MyoD Interactome Using Tandem Affinity Purification Coupled to Mass Spectrometry

Skeletal muscle terminal differentiation starts with the commitment of pluripotent mesodermal precursor cells to myoblasts. These cells have still the ability to proliferate or they can differentiate and fuse into multinucleated myotubes, which maturate further to form myofibers. Skeletal muscle terminal differentiation is orchestrated by the coordinated action of various transcription factors, in particular the members of the Muscle Regulatory Factors or MRFs (MyoD, Myogenin, Myf5, and MRF4), also called the myogenic bHLH transcription factors family. These factors cooperate with chromatin-remodeling complexes within elaborate transcriptional regulatory network to achieve skeletal myogenesis. In this, MyoD is considered the master myogenic transcription factor in triggering muscle terminal differentiation. This notion is strengthened by the ability of MyoD to convert non-muscle cells into skeletal muscle cells. Here we describe an approach used to identify MyoD protein partners in an exhaustive manner in order to elucidate the different factors involved in skeletal muscle terminal differentiation. The long-term aim is to understand the epigenetic mechanisms involved in the regulation of skeletal muscle genes, i.e., MyoD targets. MyoD partners are identified by using Tandem Affinity Purification (TAP-Tag) from a heterologous system coupled to mass spectrometry (MS) characterization, followed by validation of the role of relevant partners during skeletal muscle terminal differentiation. Aberrant forms of myogenic factors, or their aberrant regulation, are associated with a number of muscle disorders: congenital myasthenia, myotonic dystrophy, rhabdomyosarcoma and defects in muscle regeneration. As such, myogenic factors provide a pool of potential therapeutic targets in muscle disorders, both with regard to mechanisms that cause disease itself and regenerative mechanisms that can improve disease treatment. Thus, the detailed understanding of the intermolecular interactions and the genetic programs controlled by the myogenic factors is essential for the rational design of efficient therapies.

MyoD is a myogenic transcription factor with a strong capacity to induce myogenic transdifferentiation of many fully differentiated non-muscle cell lines. The epigenetic mechanisms involved in this transdifferentiation are largely unknown. Here we describe a double-affinity purification method followed by mass spectrometry to exhaustively characterize MyoD partners.

Skeletal muscle terminal differentiation starts with the commitment of pluripotent mesodermal precursor cells to myoblasts. These cells have still the ...

Magnetic-Activated Cell Sorting Strategies to Isolate and Purify Synovial Fluid-Derived Mesenchymal Stem Cells from a Rabbit Model

Mesenchymal stem cells (MSCs) are the main cell source for cell-based therapy. MSCs from articular cavity synovial fluid could potentially be used for cartilage tissue engineering. MSCs from synovial fluid (SF-MSCs) have been considered promising candidates for articular regeneration, and their potential therapeutic benefit has made them an important research topic of late. SF-MSCs from the knee cavity of the New Zealand white rabbit can be employed as an optimized translational model to assess human regenerative medicine. By means of CD90-based magnetic activated cell sorting (MACS) technologies, this protocol successfully obtains rabbit SF-MSCs (rbSF-MSCs) from this rabbit model and further fully demonstrates the MSC phenotype of these cells by inducing them to differentiate to osteoblasts, adipocytes, and chondrocytes. Therefore, this approach can be applied in cell biology research and tissue engineering using simple equipment and procedures.

This article presents a simple and economic protocol for the straightforward isolation and purification of mesenchymal stem cells from New Zealand white rabbit synovial fluid.

Mesenchymal stem cells (MSCs) are the main cell source for cell-based therapy. MSCs from articular cavity synovial fluid could potentially be used for ...

Novel Method of Plasmid DNA Delivery to Mouse Bladder Urothelium by Electroporation

Genetically engineered mouse models (GEMMs) are extremely valuable in revealing novel biological insights into the initiation and progression mechanisms of human diseases such as cancer. Transgenic and conditional knockout mice have been frequently used for gene overexpression or ablation in specific tissues or cell types in vivo. However, generating germline mouse models can be time-consuming and costly. Recent advancements in gene editing technologies and the feasibility of delivering DNA plasmids by viral infection have enabled rapid generation of non-germline autochthonous mouse cancer models for several organs. The bladder is an organ that has been difficult for viral vectors to access, due to the presence of a glycosaminoglycan layer covering the urothelium. Here, we describe a novel method developed in lab for efficient delivery of DNA plasmids into the mouse bladder urothelium in vivo. Through intravesical instillation of pCAG-GFP DNA plasmid and electroporation of surgically exposed bladder, we show that the DNA plasmid can be delivered specifically into the bladder urothelial cells for transient expression. Our method provides a fast and convenient way for overexpression and knockdown of genes in the mouse bladder, and can be applied to building GEMMs of bladder cancer and other urological diseases.

We describe a novel method for the delivery of DNA plasmid into the urothelial cells of mouse bladder in vivo through urethra catheterization and electroporation. It offers a fast and convenient way for generating autochthonous mouse models of bladder diseases.

Genetically engineered mouse models (GEMMs) are extremely valuable in revealing novel biological insights into the initiation and progression mechanisms ...