C. Vinegoni acknowledges support from National Institutes of Health (NIH) grant 1-RO1-EB006432.

The Drosophila melanogaster stocks used in this experiment are the following:
<ul style="list-style-type:none;">
<li>elav-Gal4 (FBti0002575)</li>
<li>ap-Gal4md544 (FBal0051787)</li>
<li>UAS-srcEGFP (FBti0013990)</li>
<li>w1118 (FBal0018186)</li>
</ul>
For all experiments, the UAS-Gal4 system was used to overexpress GFP in the tissue of interest (i.e the salivary glands or the wing discs). More specifically, female flies transgenic with the appropriate Gal4 were crossed to UAS-EGFP transgenic mates. The crosses were reared at 25&deg;C in a humidified incubator. When pupae start populating the vials (approximately 5-6 days after initiation of the cross), they were selected for GFP fluorescence at the white prepupal stage (0-1 hr after puparium formation) and collected for tomography imaging.
<ol>
 <li>Set up appropriate crosses and rear at 25&deg;C</li>
 <li>5-6 days after the initiation of the cross, select fluorescent progeny for imaging. Use a wet paintbrush for gentle removal of the white prepupae from the sides of the vial.</li>
 <li>Put prepupae in a drop of water or PBS placed in a petri dish to remove food particles and the glue that covers the pupal case and makes the specimen autofluorescent. Gently clean with a paintbrush. If aging of the pupae is necessary, place selected white prepupae in a petri dish with a wet paper towel (a humid chamber) or at the sides of a clean vial with fly food. This will ensure that there is enough humidity, to allow proper development of the animal.</li>
</ol>
Drosophila Mounting
<ol>
 <li>Glue the bottom part of the pupal case into a capillary glass tube (800 microns diameter) such that the fly&#x2019;s anterior/posterior axis is oriented parallel to the tube.</li>
 <li>Fix the capillary tube vertically on a rotational stage.</li>
 <li>Adjust the tilting axis of the rotational stage in order for the rotational axis to be parallel to the pixel columns of the imaging CCD.</li>
</ol>
Determination Forward Model
<ol>
 <li>Fix a pupa in a capillary glass and mount as described before</li>
 <li>Fill a silica capillary tube (100 microns, OD) with a fluorescent dye (Cy5.5)</li>
 <li>Insert the capillary tube inside the pupa at 45 degrees with respect to the anterior/posterior axis</li>
 <li>Illuminate the pupa with an excitation laser beam with a low numerical aperture lens. Collect fluorescence transillumination images over 360 degrees rotating the pupa along its vertical axis. </li>
 <li>Fit the experimental data with an appropriate forward model</li>
</ol>
Imaging Salivary Glands
<ol>
 <li>Mount a pupa expressing GFP in the salivary glands as described before</li>
 <li>Illuminate with an excitation beam and collect in transillumination the GFP fluorescence signal over 360 degrees rotating the pupa along its vertical axis. </li>
 <li>Reconstruct the acquired data utilizing the forward model</li>
</ol>
Time-Lapse Imaging
<ol>
 <li>Mount a white prepupa expressing GFP in the wing imaginal discs</li>
 <li>Keep the imaging environment humid and at room temperature to avoid dehydration of the pupa.</li>
 <li>Place a shutter to avoid continuous illumination</li>
 <li>Illuminate with an excitation beam and collect in transillumination the GFP fluorescence signal over 360 degrees rotating the pupa along its vertical axis. </li>
 <li>Reconstruct the acquired data utilizing the forward model.</li>
</ol>
Histology
<ol>
 <li>Dissect salivary glands CNS/eye discs in 1x PBS.</li>
 <li>Fix tissues in 4% Formaldehyde, 1x PEM (100mM Pipes, 1mM EGTA, 1mM MgCl2) for 20min at room temperature.</li>
 <li>Remove fixation and mount in Vectashield with dapi (Vector) </li>
 <li>Image with a fluorescent microscope. </li>
</ol>
Time-Lapse Histology
<ol>
 <li>Collect white prepupae and stage them in a humid chamber.</li>
 <li>Collect pupae at different developmental stages</li>
 <li>Prick the pupal case twice (0 hrs After Puparium Formation) with a fine needle (insect pin 000, FST) before fixation. </li>
 <li>Fix pupae in 8% Formaldehyde, 1x PEM for 6-8 hrs at room temperature with gentle agitation. </li>
 <li>After removal of fixation and rinsing with 1x PBS, cut the fixed pupa with a sharp blade in two pieces perpendicular to the A/P axis; </li>
 <li>Submerge the two pieces in Vectashield with dapi (Vector) and mount on coverglass slides (Lab-Tek) for imaging. </li>
 <li>Acquire images with a fluorescence confocal microscope.</li>
</ol>
<img src="/files/ftp_upload/1510/1510fig1thumb.jpg" alt="figure 1" border="0" /> Figure 1. Please <a href="https://www.jove.com/files/ftp_upload/1510/1510fig1.jpg">click here</a> to see a larger version of figure 1.

<ol>
	<li>Ntziachristos, V. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Looking+and+listening+to+light:+the+evolution+of+whole-body+photonic+imaging.">Looking and listening to light: the evolution of whole-body photonic imaging.</a> Nat. Biotechnol. 23, 313-320 (2005).</li><li>J, . <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Optical+projection+tomography+as+a+tool+for+3D+microscopy+and+gene+expression+studies.">Optical projection tomography as a tool for 3D microscopy and gene expression studies.</a> Science. 296, 541-545 (2002).</li><li>Dodt, H. U. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=Ultramicroscopy:+three-dimensional+visualization+of+neuronal+networks+in+the+whole+mouse+brain.">Ultramicroscopy: three-dimensional visualization of neuronal networks in the whole mouse brain.</a> Nat. Methods. 4, 331-336 (2007).</li><li>Vinegoni, C. <a target="_blank" href="http://www.ncbi.nlm.nih.gov/entrez/query.fcgi?db=PubMed&cmd=Search&doptcmdl=Citation&defaultField=Title+Word&term=In+vivo+imaging+of+Drosophila+melanogaster+pupae+with+mesoscopic+fluorescence+tomography.">In vivo imaging of Drosophila melanogaster pupae with mesoscopic fluorescence tomography.</a> Nat. Methods. 5, 45-47 (2008).</li></ol>

The authors have nothing to disclose.

In-vivo reconstructions of the pupal case and the GFP-expressing salivary glands of a D. melanogaster prepupa (Scale bar, 500 microns) with the corresponding histology (blue, dapi staining; green, GFP fluorescence) is shown in Fig 1(a). Time-lapse series imaging of D. melanogaster wing imaginal discs is shown in Fig.1(b). The images are acquired from a single live specimen, at four different time points (0,3.0, 3.5, and 6.5 hours). In the first column one projection at 0 degrees with respect to th...

mesoscopic fluorescence tomography for in-vivo imaging of developing drosophila

Visualizing developing organ formation as well as progession and treatment of disease often heavily relies on the ability to optically interrogate molecular and functional changes in intact living organisms. Most existing optical imaging methods are inadequate for imaging at dimensions that lie between the penetration limits of modern optical microscopy (0.5-1mm) and the diffusion-imposed limits of optical macroscopy (&gt;1cm) [1]. Thus, many important model organisms, e.g. insects, animal embryos or small animal extremities, remain inaccessible for in-vivo optical imaging. 
Although there is increasing interest towards the development of nanometer-resolution optical imaging methods, there have not been many successful efforts in improving the imaging penetration depth. The ability to perform in-vivo imaging beyond microscopy limits is in fact met with the difficulties associated with photon scattering present in tissues. Recent efforts to image entire embryos for example [2,3] require special chemical treatment of the specimen, to clear them from scattering, a procedure that makes them suitable only for post-mortem imaging. These methods however evidence the need for imaging larger specimens than the ones usually allowed by two-photon or confocal microscopy, especially in developmental biology and in drug discovery.
We have developed a new optical imaging technique named Mesoscopic Fluorescence Tomography [4], which appropriate for non-invasive in-vivo imaging at dimensions of 1mm-5mm. The method exchanges resolution for penetration depth, but offers unprecedented tomographic imaging performance and it has been developed to add time as a new dimension in developmental biology observations (and possibly other areas of biological research) by imparting the ability to image the evolution of fluorescence-tagged responses over time. As such it can accelerate studies of morphological or functional dependencies on gene mutations or external stimuli, and can importantly, capture the complete picture of development or tissue function by allowing longitudinal time-lapse visualization of the same, developing organism.
The technique utilizes a modified laboratory microscope and multi-projection illumination to collect data at 360-degree projections. It applies the Fermi simplification to Fokker-Plank solution of the photon transport equation, combined with geometrical optics principles in order to build a realistic inversion scheme suitable for mesoscopic range. This allows in-vivo whole-body visualization of non-transparent three-dimensional structures in samples up to several millimeters in size.
We have demonstrated the in-vivo performance of the technique by imaging three-dimensional structures of developing Drosophila tissues in-vivo and by following the morphogenesis of the wings in the opaque Drosophila pupae in real time over six consecutive hours.

Watch this Scientific Journal Video about Mesoscopic Fluorescence Tomography for In-vivo Imaging of Developing Drosophila at JoVE.com

Mesoscopic Fluorescence Tomography for In-vivo Imaging of Developing Drosophila

Mesoscopic fluorescence tomography operates beyond the penetration limits of tissue-sectioning fluorescence microscopy. The technique is based on multi-projection illumination and a photon transport description. We demonstrate in-vivo whole-body 3D visualization of the morphogenesis of GFP-expressing wing imaginal discs in Drosophila melanogaster.

Mesoscopic Fluorescence Tomography for In-vivo Imaging of Developing Drosophila

Visualizing  developing organ formation as well as progession and treatment of disease often  heavily relies on the ability to optically interrogate ...

mesoscopic-fluorescence-tomography-for-vivo-imaging-developing

Research

JoVE Journal

Biology

10.6K ビュー.  Massachusetts General Hospital. メゾスコピック蛍光トモグラフィは、組織切片の蛍光顕微鏡の浸透の制限を越えて動作します。技術は、マルチプロジェクション照明と光子輸送記述に基づいています。我々は、生体内でのGFP発現翼成虫ディスクの形態形成の全身3次元可視化を実証キイロショウジョウバエ。

ビデオ: Mesoscopic Fluorescence Tomography for In-vivo Imaging of Developing Drosophila

Single Cell Electroporation in vivo within the Intact Developing Brain

Single-cell electroporation (SCE) is a specialized technique allowing the delivery of DNA or other macromolecules into individual cells within intact tissue, including in vivo preparations. The distinct advantage of this technique is that experimental manipulations may be performed on individual cells while leaving the surrounding tissue unaltered, thereby distinguishing cell-autonomous effects from those resulting from global treatments. When combined with advanced in vivo imaging techniques, SCE of fluorescent markers permits direct visualization of cellular morphology, cell growth, and intracellular events over timescales ranging from seconds to days. While this technique is used in a variety of in vivo and ex vivo preparations, we have optimized this technique for use in Xenopus laevis tadpoles. In this video article, we detail the procedure for SCE of a fluorescent dye or plasmid DNA into neurons within the intact brain of the albino Xenopus tadpole. We also discuss methods to optimize yield, and show examples of live two-photon fluorescence imaging of neurons fluorescently labeled by SCE.

Single-cell electroporation (SCE) is a specialized technique allowing delivery of DNA or other macromolecules into individual cells within intact tissue, including in vivo preparations. Here we detail the procedure for SCE of a fluorescent dye or plasmid DNA into neurons within the intact brain of the Xenopus laevis tadpole.

Single-cell electroporation (SCE) is a specialized technique allowing the delivery of DNA or other macromolecules into individual cells within intact ...

Born Normalization for Fluorescence Optical Projection Tomography for Whole Heart Imaging

Optical projection tomography is a three-dimensional imaging technique that has been recently introduced as an imaging tool primarily in developmental biology and gene expression studies. The technique renders biological sample optically transparent by first dehydrating them and then placing in a mixture of benzyl alcohol and benzyl benzoate in a 2:1 ratio (BABB or Murray s Clear solution). The technique renders biological samples optically transparent by first dehydrating them in graded ethanol solutions then placing them in a mixture of benzyl alcohol and benzyl benzoate in a 2:1 ratio (BABB or Murray s Clear solution) to clear. After the clearing process the scattering contribution in the sample can be greatly reduced and made almost negligible while the absorption contribution cannot be eliminated completely. When trying to reconstruct the fluorescence distribution within the sample under investigation, this contribution affects the reconstructions and leads, inevitably, to image artifacts and quantification errors.. While absorption could be reduced further with a permanence of weeks or months in the clearing media, this will lead to progressive loss of fluorescence and to an unrealistically long sample processing time. This is true when reconstructing both exogenous contrast agents (molecular contrast agents) as well as endogenous contrast (e.g. reconstructions of genetically expressed fluorescent proteins).

We suggest a Born normalized approach for Optical Projection Tomography (BnOPT) that accounts for the absorption properties of imaged samples to obtain accurate and quantitative fluorescence tomographic reconstructions. We use the proposed algorithm to reconstruct the fluorescence molecular probe distribution within small animal organs.

Optical projection tomography is a three-dimensional imaging technique that has been recently introduced as an imaging tool primarily in developmental ...

Time-lapse Imaging of Mitosis After siRNA Transfection

Changes in cellular organization and chromosome dynamics that occur during mitosis are tightly coordinated to ensure accurate inheritance of genomic and cellular content. Hallmark events of mitosis, such as chromosome movement, can be readily tracked on an individual cell basis using time-lapse fluorescence microscopy of mammalian cell lines expressing specific GFP-tagged proteins. In combination with RNAi-based depletion, this can be a powerful method for pinpointing the stage(s) of mitosis where defects occur after levels of a particular protein have been lowered. In this protocol, we present a basic method for assessing the effect of depleting a potential mitotic regulatory protein on the timing of mitosis. Cells are transfected with siRNA, placed in a stage-top incubation chamber, and imaged using an automated fluorescence microscope. We describe how to use software to set up a time-lapse experiment, how to process the image sequences to make either still-image montages or movies, and how to quantify and analyze the timing of mitotic stages using a cell-line expressing mCherry-tagged histone H2B. Finally, we discuss important considerations for designing a time-lapse experiment. This strategy is complementary to other approaches and offers the advantages of 1) sensitivity to changes in kinetics that might not be observed when looking at cells as a population and 2) analysis of mitosis without the need to synchronize the cell cycle using drug treatments. The visual information from such imaging experiments not only allows the sub-stages of mitosis to be assessed, but can also provide unexpected insight that would not be apparent from cell cycle analysis by FACS.

Here we describe a basic protocol to image and quantify the mitotic timing of live mammalian tissue culture cells after siRNA transfection.

Changes in cellular organization and chromosome dynamics that occur during mitosis are tightly coordinated to ensure accurate inheritance of genomic and ...

Preparation of Developing and Adult Drosophila Brains and Retinae for Live Imaging

The Drosophila brain and visual system are widely utilized model systems to study neuronal development, function and degeneration. Here we show three preparations of the brain and visual system that cover the range from the developing eye disc-brain complex in the developing pupae to individual eye and brain dissection from adult flies. All protocols are optimized for the live culture of the preparations. However, we also present the conditions for fixed tissue immunohistochemistry where applicable. Finally, we show live imaging conditions for these preparations using conventional and resonant 4D confocal live imaging in a perfusion chamber. Together, these protocols provide a basis for live imaging on different time scales ranging from functional intracellular assays on the scale of minutes to developmental or degenerative processes on the scale of many hours.

Preparation of Developing and Adult Drosophila Brains and Retinae for Live Imaging

This protocol describes three Drosophila preparations: 1) adult brain dissection, 2) adult retina dissection and 3) developing eye disc- brain complexes dissection. Emphasis is laid on special preparation techniques and conditions for live imaging, although all preparations can be used for fixed tissue immunohistochemistry.

The Drosophila brain and visual system are widely utilized model systems to study neuronal development, function and degeneration. Here we show three ...

In-vivo Centrifugation of Drosophila Embryos

A major strategy for purifying and isolating different types of intracellular organelles is to separate them from each other based on differences in buoyant density. However, when cells are disrupted prior to centrifugation, proteins and organelles in this non-native environment often inappropriately stick to each other. Here we describe a method to separate organelles by density in intact, living Drosophila embryos. Early embryos before cellularization are harvested from population cages, and their outer egg shells are removed by treatment with 50% bleach. Embryos are then transferred to a small agar plate and inserted, posterior end first, into small vertical holes in the agar. The plates containing embedded embryos are centrifuged for 30 min at 3000g. The agar supports the embryos and keeps them in a defined orientation. Afterwards, the embryos are dug out of the agar with a blunt needle. Centrifugation separates major organelles into distinct layers, a stratification easily visible by bright-field microscopy. A number of fluorescent markers are available to confirm successful stratification in living embryos. Proteins associated with certain organelles will be enriched in a particular layer, demonstrating colocalization. Individual layers can be recovered for biochemical analysis or transplantation into donor eggs. This technique is applicable for organelle separation in other large cells, including the eggs and oocytes of diverse species.

In-vivo Centrifugation of Drosophila Embryos

We describe a method to separate organelles by density in living Drosophila embryos. Embryos are embedded in agar and centrifuged. This technique yields reproducible separation of major organelles along the anterior-posterior embryo axis. This method facilitates colocalization experiments and yields organelle fractions for biochemical analysis and transplantation experiments.

A major strategy for purifying and isolating different types of intracellular organelles is to separate them from each other based on differences in ...

In vivo Imaging of Intact Drosophila Larvae at Sub-cellular Resolution

Recent improvements in optical imaging, genetically encoded fluorophores and genetic tools allowing efficient establishment of desired transgenic animal lines have enabled biological processes to be studied in the context of a living, and in some instances even behaving, organism. In this protocol we will describe how to anesthetize intact Drosophila larvae, using the volatile anesthetic desflurane, to follow the development and plasticity of synaptic populations at sub-cellular resolution1-3. While other useful methods to anesthetize Drosophila melanogaster larvae have been previously described4,5,6,7,8, the protocol presented herein demonstrates significant improvements due to the following combined key features: (1) A very high degree of anesthetization; even the heart beat is arrested allowing for lateral resolution of up to 150 nm1, (2) a high survival rate of &gt; 90% per anesthetization cycle, permitting the recording of more than five time-points over a period of hours to days2 and (3) a high sensitivity enabling us in 2 instances to study the dynamics of proteins expressed at physiological levels. In detail, we were able to visualize the postsynaptic glutamate receptor subunit GluR-IIA expressed via the endogenous promoter1 in stable transgenic lines and the exon trap line FasII-GFP1. (4) In contrast to other methods4,7 the larvae can be imaged not only alive, but also intact (i.e. non-dissected) allowing observation to occur over a number of days1. The accompanying video details the function of individual parts of the in vivo imaging chamber2,3, the correct mounting of the larvae, the anesthetization procedure, how to re-identify specific positions within a larva and the safe removal of the larvae from the imaging chamber.

In vivo Imaging of Intact Drosophila Larvae at Sub-cellular Resolution

This protocol describes a reliable method for anesthetization and imaging of intact Drosophila melanogaster larvae. We have utilized the volatile anesthetic desflurane to allow for repetitive imaging at sub-cellular resolution and re-identification of structures for up to a few days1.

Recent improvements in optical imaging, genetically encoded fluorophores and genetic tools allowing efficient establishment of desired transgenic animal ...

Rapid Analysis and Exploration of Fluorescence Microscopy Images

Despite rapid advances in high-throughput microscopy, quantitative image-based assays still pose significant challenges. While a variety of specialized image analysis tools are available, most traditional image-analysis-based workflows have steep learning curves (for fine tuning of analysis parameters) and result in long turnaround times between imaging and analysis. In particular, cell segmentation, the process of identifying individual cells in an image, is a major bottleneck in this regard.
Here we present an alternate, cell-segmentation-free workflow based on PhenoRipper, an open-source software platform designed for the rapid analysis and exploration of microscopy images. The pipeline presented here is optimized for immunofluorescence microscopy images of cell cultures and requires minimal user intervention. Within half an hour, PhenoRipper can analyze data from a typical 96-well experiment and generate image profiles. Users can then visually explore their data, perform quality control on their experiment, ensure response to perturbations and check reproducibility of replicates. This facilitates a rapid feedback cycle between analysis and experiment, which is crucial during assay optimization. This protocol is useful not just as a first pass analysis for quality control, but also may be used as an end-to-end solution, especially for screening. The workflow described here scales to large data sets such as those generated by high-throughput screens, and has been shown to group experimental conditions by phenotype accurately over a wide range of biological systems. The PhenoBrowser interface provides an intuitive framework to explore the phenotypic space and relate image properties to biological annotations. Taken together, the protocol described here will lower the barriers to adopting quantitative analysis of image based screens.

Here we describe a workflow for rapidly analyzing and exploring collections of fluorescence microscopy images using PhenoRipper, a recently developed image-analysis platform.

Despite rapid advances in high-throughput microscopy, quantitative image-based assays still pose significant challenges. While a variety of specialized ...

Drosophila Preparation and Longitudinal Imaging of Heart Function In Vivo Using Optical Coherence Microscopy (OCM)

Longitudinal study of the heartbeat in small animals contributes to understanding structural and functional changes during heart development. Optical coherence microscopy (OCM) has been demonstrated to be capable of imaging small animal hearts with high spatial resolution and ultrahigh imaging speed. The high image contrast and noninvasive properties make OCM ideal for performing longitudinal studies without requiring tissue dissections or staining. Drosophila has been widely used as a model organism in cardiac developmental studies due to its high number of orthologous human disease genes, its similarity of molecular mechanisms and genetic pathways with vertebrates, its short life cycle, and its low culture cost. Here, the experimental protocols are described for the preparation of Drosophila and optical imaging of the heartbeat with a custom OCM system throughout the life cycle of the specimen. By following the steps provided in this report, transverse M-mode and 3D OCM images can be acquired to conduct longitudinal studies of the Drosophila cardiac morphology and function. The en face and axial sectional OCM images and the heart rate (HR) and cardiac activity period (CAP) histograms, were also shown to analyze the heart structural changes and to quantify the heart dynamics during Drosophila metamorphosis, combined with the videos constructed with M-mode images to trace cardiac activity intuitively. Due to the genetic similarity between Drosophila and vertebrates, longitudinal study of heart morphology and dynamics in fruit flies could help reveal the origins of human heart diseases. The protocol here would provide an effective method to perform a wide range of studies to understand the mechanisms of cardiac diseases in humans.

Drosophila Preparation and Longitudinal Imaging of Heart Function In Vivo Using Optical Coherence Microscopy OCM

Here, the experimental protocols are described for preparing Drosophila at different developmental stages and performing longitudinal optical imaging of Drosophila heartbeats using a custom optical coherence microscopy (OCM) system. The cardiac morphological and dynamical changes can be quantitatively characterized by analyzing the heart structural and functional parameters from OCM images.

Longitudinal study of the heartbeat in small animals contributes to understanding structural and functional changes during heart development. Optical ...

Synthesis of 68Ga Core-doped Iron Oxide Nanoparticles for Dual Positron Emission Tomography /(T1)Magnetic Resonance Imaging

Here, we describe a microwave synthesis to obtain iron oxide nanoparticles core-doped with 68Ga. Microwave technology enables fast and reproducible synthetic procedures. In this case, starting from FeCl3 and citrate trisodium salt, iron oxide nanoparticles coated with citric acid are obtained in 10 min in the microwave. These nanoparticles present a small core size of 4.2 &#177; 1.1 nm and a hydrodynamic size of 7.5 &#177; 2.1 nm. Moreover, they have a high longitudinal relaxivity (r1) value of 11.9 mM-1&#183;s-1 and a modest transversal relaxivity value (r2) of 22.9 mM-1&#183;s-1, which results in a low r2/r1 ratio of 1.9. These values enable positive contrast generation in magnetic resonance imaging (MRI) instead of negative contrast, commonly used with iron oxide nanoparticles. In addition, if a 68GaCl3 elution from a 68Ge/68Ga generator is added to the starting materials, a nano-radiotracer doped with 68Ga is obtained. The product is obtained with a high radiolabeling yield (&#62; 90%), regardless of the initial activity used. Furthermore, a single purification step renders the nano-radiomaterial ready to be used in vivo.

Synthesis of 68Ga Core-doped Iron Oxide Nanoparticles for Dual Positron Emission Tomography /T1Magnetic Resonance Imaging

Here, we present a protocol to obtain 68Ga core-doped iron oxide nanoparticles via fast microwave-driven synthesis. The methodology renders PET/(T1)MRI nanoparticles with radiolabeling efficiencies higher than 90% and radiochemical purity of 99% in a 20-min synthesis.

Here, we describe a microwave synthesis to obtain iron oxide nanoparticles core-doped with 68Ga. Microwave technology enables fast and reproducible ...

Strategies for Optimization of Cryogenic Electron Tomography Data Acquisition

Cryogenic electron tomography (cryoET) is a powerful method to study the 3D structure of biological samples in a close-to-native state. Current state-of-the-art cryoET combined with subtomogram averaging analysis enables the high-resolution structural determination of macromolecular complexes that are present in multiple copies within tomographic reconstructions. Tomographic experiments usually require a vast amount of tilt series to be acquired by means of high-end transmission electron microscopes with important operational running-costs. Although the throughput and reliability of automated data acquisition routines have constantly improved over the recent years, the process of selecting regions of interest at which a tilt series will be acquired cannot be easily automated and it still relies on the user's manual input. Therefore, the set-up of a large-scale data collection session is a time-consuming procedure that can considerably reduce the remaining microscope time available for tilt series acquisition. Here, the protocol describes the recently developed implementations based on the SerialEM package and the PyEM software that significantly improve the time-efficiency of grid screening and large-scale tilt series data collection. The presented protocol illustrates how to use SerialEM scripting functionalities to fully automate grid mapping, grid square mapping, and tilt series acquisition. Furthermore, the protocol describes how to use PyEM to select additional acquisition targets in off-line mode after automated data collection is initiated. To illustrate this protocol, its application in the context of high-end data collection of Sars-Cov-2 tilt series is described. The presented pipeline is particularly suited to maximizing the time-efficiency of tomography experiments that require a careful selection of acquisition targets and at the same time a large amount of tilt series to be collected.

The increasing demand for large-scale data collection in cryogenic electron tomography requires high-throughput image acquisition routines. Described here is a protocol that implements the recent developments of advanced acquisition strategies aimed at maximizing the time-efficiency and throughput of tomographic data collection.